Construction of Auditorium Block at Hipa Fair Lawn Shimla in Tehsil and District Shimla (HP

Amount

Cutting in earth work in by mechanical in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per the directions of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in foundation trenches in all heights and depths in all kinds of soil including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un- useful material and transportation of the un -useful material for disposing at dumping site (to be arranged by the contractor) including payment of prescribed charges of dumping to be borne by the contractor to the satisfaction of Engineer- in -Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour ,machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones , shingles aggregate and slates shall be properly stacked at site to the maximum possiblke extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-Charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) on his own cost as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation aqnd used/ removed as per the directions of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in drains and channels in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site., and according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful materials for disposing at dumping site (To be arranged by the contractor)including payment of prescribed charges of dumping to be borne by the contractor as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine, dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour( if required). All useful materials such as stones, shingles aggregate and slates shall be properly stacked at site and handed over to the department free of cost to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of material with in all leads and lifts as per the direction of Engineer-in-Charge.

Boulder filling dry hand packed under floors including watering ramming consolidating and dressing complete as per HPPWD specification including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing form work with steel plates (3.15mm) (three point one five milimetre) thick welded with angle iron in frame (30x30x5mm) ( Thirty into thirty into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4mtr.(Four metre) and removal of the same for insitu-reinforced concrete and plain concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (a)Foundations, footings & bases of columns etc., and mass concrete.

(b)Flat surfaces such as soffits of suspended floors, roofs, landing and the like .Foors etc., upto 200mm( Two hundred milimetre) in thickness.

( c) Columns, pillars, posts and struts:- Square rectangular or polygonal in plan.

( d) Beams, cantilever, girders and lintels i) Sides and soffits of beams, beam haunchings, cantilvers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor.

( e) Stair cases with sloping or stepped soffits excluding landing.

(f)Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

(g)Extra for providing and fixing from work for coffer slab of size up to 0.90x 0.90x 90cm. (Zero point nine zero into Zero point nine zero into ninety centimetre with Rai /soft wood for vertical surface / horizontal surface such as coffer and the like only contact area of coffer shuttering at all floor level including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

(h) Edges of slabs and breaks in floors and walls: Under 20 cm. (twenty centimetre) wide.

Providing and laying cement concrete 1:6:12(One cement :six sand: twelve graded broken/ crushed stone aggregate 40mm (forty milimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying cement concrete 1:4:8(one cement:four sand:eight graded cursed/broken stone agg.40mm(forty milimetre) nominal size)mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. .

Providing and laying cement concrete 1:2:4(one cement:two sand :four graded cursed/broken stone aggregate 20mm(twenty milimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying cement concrete work 1:1.5:3 (one cement : one point five sand : three graded stone aggregate 20 mm(Twenty milimetre) nominal size) (twenty millimeters nominal size) michanically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforced concrete work, including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (a) Foundation, footing, bases of columns and the like and mass concrete.

(b) Suspended floor roofs, landing and shelves and their support balconies, beams,girders, bressumers and contilever upto all floor level.

( c) Columns, pillars,posts and struts upto all floor level.

(d) Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto all floor level.

(e ) Wall (any thickness but not less than 0.1 m thickness) attached pilasters, uttresses, plinth and string courses etc. from top of foundation level upto all floor level :

Providing and laying cement concrete work 1:1.5:3 (one cement : one point five sand :three graded stone aggregate 20mm (twenty milimetre) nominal size) reinforced concrete chajjas not exceeding 10 cm(ten centimetre) in thickness upto all floor levels including finishing the exposed surfaces with cement mortar 1:3(One cement:three sand) to give a smooth and even surface including centring/ form work but excluding cost of reinforcement concrete Moulding as in cornics window sill excluding 15 cm (fifteen centimetre) girth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying a coat of hot bitumen (mexphalt 80/100 (eighty/ hundred)or equivalent) using 1.70 kg. (one point seventy kiliogram) per square metre on damp proof course after cleaning the surface with a place of cloth lightly soaked with kerosene oil including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge

Providing Tor steel reinforcement for Reinforced Cement Concrete work includiung bending, binding & placing in position including cost of binding wire complete up to all floors, Above plinth level upto all floor level upto all floor level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying cement slurry on R.C.C.slab or cement concrete work using 2.75 kg. (two point seventy five kilogram) of cement per squre metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge

Brick work using common burnt clay building bricks in Super Structure including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Cement Mortar 1:6 (One cement:Six sand)Second Class Bricks.

Half brick masonry in common burnt clay building bricks in Super structure above plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) Cement Mortar 1:4(One cement:Four sand) Second Class Bricks.

Random rubble masonry/polygonal rubble masonry(un-coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement:Six sand:twelve graded stone aggregate 20mm (twenty milimetre)nominal size) in cement mortar 1:6 (One cement: Six sand) in breast wall and retaining walls including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing PVC 100mm (one hundred milimetre) dia pipe for weep holes with cement mortar complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing & fixing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. a)2nd class Deodar wood.

Providing wood work in frames of doors, windows, clerestory , windows and other frames wrought, framed and fixed in position upto all floor level Rai wood including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing paneled glazed or paneled and glazed shutters for doors windows and clerestory windows in 2nd class deodar wood with double glass for both openable shutter and fixed portion with necessary beading as per architect drawings including black enameled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.( a)40mm (forty milimetre) thick( i)2nd Class Deodar Wood.

Providing and fixing 12mm(Tywelve milimetres) thick preliminated board ISI marked ND-ISI2823 both side BWP Phenol bounded exterior/interior grade shutters with 35mm (thirty five milimetres) thick frame of first class deodar wood for doors including bright finished/ black enameled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 19 mm (Nineteen milimetre) thick commercial board with hard wood edging shutters for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing Rai wood Panaling/lining with but jointing and nails (frame work to be measured and paid for separately)including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and and fixing ply wood lining with but jointing and nails (frame work to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 6mm(six milimetre) thick.

Providing and fixing anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. completed including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i)300x16mm (three hundred into sixteen milimetre)size.

(ii)250 x 16 mm (two hundred fifty into sixteen milimetre) size.

Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)200x10mm (two hundred into ten milimetre)size.

(ii)150 x 10 mm (one hundred fifty into ten milimetre) size.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125 mm(one hundred twenty five milimetre) size

(ii) 100mm (One hundred milimetre) size

(iii) 75mm (seventy five milimetre) size

Providing and fixing oxidized M.S. hasps and stapple for cup board 90 mm (ninety milimetre) size with necessary screws etc complete. The rate is including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing oxidized 100mm(one hundred milimetre) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge

Providing and fixing bright finished brass ball catcher including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 50mm (fifty milimetre) bright finished brass cup board or ward robe knob including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge

Providing and fixing Hard wood edge cover fillets beeding 19 x 6mm (nineteen into six milimetre)section including mitring at junction with wooden screws and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 1 mm(one milimetre) thick coloured or plain lamination sheet (sunmica) on board /plywood with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing wooden lining /pannaling fixed in position upto all floor levelincluding carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Ist Class Rai wood.

Providng and fixing MS 50x25 mm(fifty into twenty five milimetre) 16 gauge (sixteen gauge) pipe frame work filled with 25mm(twenty five milimetre)thick 37 kg/cum density glass wool and P/F cloth wings made out of fire resistant heavy duty cloth of MOSHI and equivalent of FLORDA or its commercial ply wood one side and 12mm(twelve milimetre) foam fixed on it there should be thrust bearing at the bottom and pin bush on top so that wing can rotate around central axis size 800mm(eight hundred milimetre) complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providng and fixing main curtain for stage shall be fire resistant cloth of moshi and equivalent of FLORA or its equivalent main curtain this is completely automatic system made from carbo sheet track rail and brackets filled with roller of brass and nyion material fitted with sealed bearing self lubricating all rollers are pushed and pulled with matter rollerclamp with 3mm (three milimetre) dia wire tope complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providng and fixing rear curtain for stage shall be fire resistant cloth of moshi and equivalent of FLORA or its equivalent main curtain this is completely automatic system made from carbo sheet track rail and brackets filled with roller of brass and nyion material fitted with sealed bearing self lubricating all rollers are pushed and pulled with matter rollerclamp with 3mm (three milimetre) dia wire tope complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Side wings made from MS pipe 50 NB dia frame work wrapped with velet cloth both side with assemble at top supported from existing structure and wheel on bottom for free movement complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Brills wings made dark shae cloth to be installed above the stage with 25mm (twenty five milimetre) dia pipe adjusting complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing cable tray size 4x2 of 16 gauge(four into two of sixteen gauge) sheet CRC for wiring of stage light and sound system and enrouted to controll room including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing winch suspention mortorised operated suspension sets 350 Kg (three hundred fifty kilogram)capacity five line block winch unit with handle and retchet clew plate and steel wire roe winch pulling etc. for lighting bars scenery sets and front making frill including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 6mm(six milimetre) cement bonded fiber board ceiling of approved quality of everest or equivilent with butt joint in nails frame work and cover fillets to be paid for separately including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 8mm (eight milimetre) everest board ceiling of approved quality of everest or equivilent with butt joint in nails frame work and cover fillets to be paid for separately)including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing aerolite armstrong tiles of size 60x60 cm(sixty into sixty centimetre)50%(fifty percent) fully perforted and 50%(fifty percent) plain tiles inomination with powder coated G.I. frame work including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Cement concrete flooring 1:2:4(one cement :twosand:four graded stone aggregate 20mm(twenty milimetre) nominal size) and curing complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 40mm (forty milimetre)thick.

Kota stone slab flooring 20 mm (twenty milimetre)(average) thick base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete in all floors including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 25mm (twenty five milimetre) thick

Kota stone slab 25 mm(twenty five milimetre) (average) thick in risers of steps,skirting dado and pillars laid on 12 mm(twelve milimetre) (average) thick cement mortar 1:3 (one cement :three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete in all floors including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing HDF decorative laminate core board krono (original) flooring AC5 class 32, 12mm(twelve milimetre) thick placed over cushion of 2mm(two milimetre) thick expended polethene foam plus 100 Microne thick polethene sheet under lay of approved shade and colour 6"x4'-0" size complete in all respect upto all floor leves including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying VITRIFIED floor tiles of approved size and shade WITH wooden shade of size 4"x4'-0" of NITCO /Orient /Kajaria or equivalent tiles in flooring ,treads of steps and landing on a bed of 12mm(twelve milimetre) thick cement 1:3(One cement :three sand) finished with flush pointingincluding carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying VITRIFIED floor tiles of approved size and shade WITH wooden shade of size 600X600mm(six hundred into six hundred milimetre) size of NITCO /Orient /Kajaria or equivalent tiles in flooring ,treads of steps and landing on a bed of 12mm(twelve milimetre) thick cement 1:3(One cement :three sand) finished with flush pointing including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing 3.9mm(three point nine milimetre) thick tera flex flooring of approved shade of GERFLOR or equivalent over cement concrete flooring complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying Ist quality paver ceramic tiles 30 x30 cm(thirty into thirty centimetre) in flooring of approved size and shade WITH granite border 23cm(twenty three cementimetre) wide of NITCO/Orient/Kajaria or equivalent tiles in flooring, treads of steps and landing on a bed of 12mm(tweleve milimetre) thick cement mortar 1:3(One cement is to three sand) finished with flush pointing including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

White glazed tiles 6mm (Six milimetre) thick in skirting risers of steps and dado 12mm (Twelve milimetre) thick cement mortar 1:3(One cement is to Three Sand) and jointed with cement slurry inclusive including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing Garsa stone cladding 12mm(twelve milimetre) RCC surface side as on faces of arch masonry walls etc. on 12mm(twelve milimetre) thick cement plaster 1:3(One cement is to three sand)and jointing with cement slurry including scaffloding complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing 25mm thick (twenty five milimetre) thick wooden planking tounged and grooved wooden flooring fixing to GI pipe frame with iron screws complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 2mm(two milimetre) thick vinyle PVC flooring over cement concrete flooring with approved adhesive complete of approved quality LG or its equivalent including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing Red Mandana stone flooring on 20mm(twenty milimetre) thick base of cement mortar 1:4(one cement is to four sand)including jointing with grey cement slurry mixed with pigment to match the shade of stone including rubbing and polishing complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Baroda Gree marbal flooring 20mm(twenty milimetre) (av erage) thick base of cement mortar 1:4(one cement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polising complete in all floors including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying marbal flooring 20mm(twenty milimetre)(average) thick base of cement mortar 1:4(One cement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in all floors white Marble including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing heavy duty precast concrete inter locking pavers block vibro compacted upto M-15 grade including border and kurb block grey or coloured over sub base of concrete with 25mm(twenty five milimetre) thick cement mortar 1:4(one cement is to four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete 40mm(forty milimetre) thick including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 6mm(six milimetre) thick prepainted sand which pupf sheet in roofing including fixing with prepainted iron J or L hooks ,bolts and nuts 6mm(six milimetre) dia metre with prepainted limpet and rubber washers complete with all accessories as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (zero point six zero milimetre)thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm(six milimetre) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing valley 60 cm (sixty centimetre)overall 0.60 mm (zero point six zero milimetre)thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks , bolts and nuts 6mm (six milimetre)dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing valley 0.63 cm (zero point sixty three centimetre)thick sheet 15 cm (fifteen centimetre)wide 45cm(forty five centimetre) over semi-circular plain G.I. sheets gutter with iron brackets 40mmx 3mm (forty milimetre into three milimetre)size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing flusing 60 cm (sixty centimetre)overall 0.60 mm (zero point six zero milimetre)thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks , bolts and nuts 6mm (six milimetre)dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing B.P. sheet 2.00mm(two point zeromilimetre) thick 30 cm(thirty centimetre) wide in facia including cutting, welding and applying a coat of red lead primer etc. complete as per the instruction of Engineer-in-Charge complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing policarbonate sheet in roofing including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia metre with prepainted limpet and rubber washers complete with all accessories as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing on wall face PVC D-Plast rain water pipe of working pressure not less than 4.5 Kg./sqm including filling the joints with approved adhesive complete 100mm(one hundred milimetre) nominal size inclusive for including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing on wall face PVC D-Plast accessories rain water pipe including filling joints with approved adhesive complete 100mm(one hundred milimetre) nominal size PVC D-plast Plain bend 100mm(one hundred milimetre) dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

PVC D plast Plain shoe 100mm(one hundred miliemtre) dia

Providing and fixing m.s.holder bat clamps of approved design to PVC,C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm(ten into ten into ten centimetre) of 1:2:4:mix (one cement is to two sand is to four stone graded stone aggregate 20 mm(twenty milimetre) nominal size) and cost of cutting holes and making good the wall etc.100mm(One hundred milimetre) diametre for C.I. pipe . The rate is inclusive for including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing angle iron doors frames (Single rebate) manufactured from M.S. angle section of 50x50x6mm(fifty into fifty into six milimetre) and M.S. flat 63x5 (sixty three into five milimetres)as per design and drawing including jambs, lock jambs beeds if required angles threshold of M.S. angle 50x25mm(fifty into twenty five milimetres) welded or rigidly fixed by mechanical means lugs with split ends tails to each jambs including steel butt hinges 2.5mm(two decimal five milimetres) thick with a provision of locking arrangements and shock absorbers as specified and applying coat of approved steel primer after pre-treatment of the surfaces or as directed by the Engineer-in-Charge with all leads, lifts of materials and other incidentals.

Providing and fixing anodized aluminum work for doors windows ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS-733 and IS-1285 anodized transparent or dyed to required shade according to IS-1868(Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions at top bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth rust tee, straight, mitered and jointed mechanically, where even required including shape beading for glazing/paneling, C.P. brass/stainless steel screws all complete as per architectural drawing and the direction of the Engineer-in-Charge. a) For doors windows & ventilators of glazed partitions frame.

b)For shutters of doors windows and ventilators including providing and fixing of fittings where even required including the cost of PVC/neoprene gaskets required (fitting & glazing/ paneling shall be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc. with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)glazing with glass panes of 4mm (four milimetre)thickness (weight not less than 10.00 kg/sqm. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing aluminium anodised powder coated pattern to existing window/ventilatior with 80mmx80mm(eighty milimetre into eighty milimetre) panels holes with 25x8mm (twenty five into eight milimetre) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing standless steel wire mesh aluminium doors and windows ventilators shutters and partation etc. with PVC/Neoprensgasket etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Steel work steel of Make SAIL /RASHTRIYA ISPAT/TATA or equivalent welded in built up sectgions, trusses and framed work ,including cutting hoisting fixing in position and applying a priming coat of red lead paint in beams,joists, channels, angles, tees,flat with connecting plates, angles cleats, as in main and cross beams , hips , jack rafters, pulins connection to common rafter and the like including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

In gratings framed guard bars, ladders, railling, brackets and similar works.

In trusses and trussed purlings in Buildings

Supplying and fixing rolling shutters of approved make made of 80mm x 1.25mm (eighty milimetre into one point two five milimetre) M.S. laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft, with brackets side guides and arrangements for inside and outside locking with push pull operation complete butt excluding the cost of the top cover and spring upto all floor level Shutters having width below 3.5 metres (three point five metres)including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 27.5cm(twenty seven pont five centimetre) long wire spring grade No.2 for rolling shutters upto all floor level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing top cover for rolling shutters upto all floor level shutters having width below 3.5 metre(three point five metre) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing ball bearing for rolling shutters upto all floor level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying priming coat on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foregin matters paint other than white including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Painting two coats (excluding priming coats) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters paint other than white including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Painting two coats (exclduing priming coats) on new wood and wood based surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

6mm(six milimter) cement plaster to ceiling in cement mortar 1:3(one cement is to three sand) in all floor level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

15mm(fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrerte/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (eighty milimetres) in girth and finished even and smooth with cement mortar 1:6(one cement is to six sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

15mm(fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrerte/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (eighty milimetres) in girth and finished even and smooth with cement mortar 1:6(one cement is to six sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

20mm (twenty milimetre) cement plaster in two coats backing coat 10mm(ten milimetre) and finishing coat 10mm(ten milimetre) thick on fair side of brick/stone masonry walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty milimetre) in girth and finished even and smooth cement mortar 1:4(one cement is to four sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Applying white birla putty in double coat on plastered surface including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm(eighty milimetres) in girth and finished even and smooth with cement mortar 1:6(one cement is to six sand)including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface on all floor to give an even shade over and including priming coat of whiting after thoroughly brushing the surface free from mortar dropping and other foreign material including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after throughly brushing the surface to remove all dirt and vremains of loose powdered materials including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing under layer for plinth protection of 75mm(seventy five milimetres) thick (un-consolidated) bed of dry brick/stone aggregate 40mm (forty milimetres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing plinth protection 50mm(fifty milimetres) thick cement concrete 1:3:6(one cement is to three sand is to six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) including finishing the top surfaces of concrete smooth, including preparation of ground including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying 23cm (twenty three centimetre) dia half round stone ware pipes in plinth protection to drain out the rain water etc. including preparation of ground including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing screen with main frame of size 50mmx50mm (fifty milimetre into fifty milimetre) on MS hollow square section complete in all respect as per drawing and specification including preparation of ground including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing to wall ceiling floor galvanised mild steel tubes (Medium grade) tube fittings (earth work in trenches to be measured and paid for separately) 15mm (fifteen milimetres) nominal bore including preparation of ground including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

20mm (twenty milimetre) nominal bore

Providing and laying in trenches glavanised mild steel tubes (Medium grade) tube fittings (earth work in trenches to be measured and paid for separately)25mm (twenty five milietre) nominal bore including preparation of ground including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm to 40mm(twenty milimetres to forty milimetres) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and placing water tank make SINTEX having capacity of 1000 litres(one thousand liters) each tank necessary fittings including over flow pipe scour pipe etc. and pads required for in let and out let and inside painting ball valve with cover and locking arrangements including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Fixing water metre and stop cock in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, socket etc. cutting and making long screws complete (water metre and stop cock to be measured and paid for separately 15mm (fiften milimetre)nominal bore including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing high pressure PVC spun spigot and socked, waste and ventilating pipes ISI marked including fixing with approved adhesive complete 75mm(seventy five milimetre)nominal size including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

100mm(one hundred milietre) nominal size.

Providing and fixing iron holder bats clamps including steel bolts to sand cast iron, spun iron pipes and PVC pipes etc. embeded in and including cement concrete blocks 100mmx 100mmx100mm (one hundred milimetre into one hundred milimetre into one hundred milimetre of 1:2:4 mix(one cement is to two sand is to four graded stone aggregate 20mm(twenty milimetre)nominal size) including cost of cutting holes and making good the walls 75mm(seventy five milimetre) nominal size including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

100mm(one hundred milietre) nominal size.

Providing and fixing High pressure PVC fitting and accessories including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. a) Bends of required degree (any radius) With oval access door insertion rubber washer 3mm(three milimetre) thick, bolts and nuts complete. ( i) 75mm (seventy five milimetre)nominal size.

(ii) 100mm(one hundred milietre) nominal size.

Plain bends:- (i) 75mm (seventy five milimetre)nominal size.

(ii) 100mm(one hundred milietre) nominal size.

b) Single equal branch of required degree: With oval access door insertion rubber washer 3mm(three milimetre) thick, bolts and nuts complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.( i) 75mm (seventy five milimetre)nominal size.

ii) 100mm(one hundred milietre) nominal size.

c) Collar: (i) 75mm (seventy five milimetre)nominal size.

ii) 100mm(one hundred milietre) nominal size.

Providing and fixing cast iron cowl 75mm(seventy five milimetre) nominal diametre including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

100mm(one hundred milietre) dia metre.

Providing and fixing cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the wall and floors 75mm(seventy five milimetre)nominal dia metre including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing Hindware IS marked IS No. 2556 or equivalent in white colour viterous China water closet squatting pan (Indian Type W.C. pan) size 580mm(five hundred eighty milimetre) (Earth work,bed concrete,foot rest and traps to be measured and paid for separately) Orrissa pattern including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing Hindware IS marked IS No.20049 or equivalent in white colour viterous China water closet squatting pan(Europian Type W.C. pan) (Earth work,bed concrete, and traps to be measured and paid for separately Europian Type including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 100mm(one hundred milimetre)size 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1(one cement is to one sand) 110mm (one hundred ten milimetre) dia white (solid/ hollow type including carriage of materials in all leads and lifts as per directions of the Engineer-in-Char

Providing and fixing plastic seat and cover for wash dawn water closet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 10.00 ltr.(ten liter) capacity PVC low level flushing cistern Hind ware sleek ultra design No.186575 size 42 x39x14 cm(forty two into thirty nine into fourteen centimetre) or equivalent with a pair of brackets with fittings such as lead valve,syphon, 15mm(fifteen milimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and overflow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet(overflow) pipe to be measured and paid for separately including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing viterous China Hind ware IS marked or equivalent flate back or corner type lipped front urinal basin 430x260x350(four hundred thirty into two hundred sixty into three hundred fifty) and 340x430x265mm(three hundred into four hundred thirty into two hundred sixty five milimetre) size of automatic flushing system with C.I. or M.S. brackets painted white No.60002 including cutting holes and making good the same fitting complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing CP brass flush pipe separator for urinal with fitting such as union clamps etc. including cutting holes and making good the same with in all leads and lifts 15mm(fifteen milimetre) size including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing division plate for urinal with fitting 600x300mm(six hundred into three hundred milimetre) vetrious china with including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing viterous China Hind ware IS marked IS No.2556 or equivalent wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting Flat back 550x400mm (five hundred fifty into four hundred milimetre) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing C.P. brass waste for waste for wash basin or sink 32mm(thrity two milimetre) dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing MI union for wash basin or sink 32mm(thirty two milimetre) dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 100mm(One hundred milimetre) dia C.P. grating including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing C.P. brass toilet paper holder including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 600mmx450mm(six hundred milimetre into four hundred fifty milimetre) bevelled edge mirror of superior glass mounted on 6mm(six milimetre) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws 600x20mm(six hundred into twenty milimetre) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 600mmx 120mm(six hundred milimetre into one hundred twenty milimetre) glass shelf with C.P.brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing C.P. brass bib tap with capstan head 15mm(fifteen milimetre) dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing C.P. brass pillar tap with capstan head 15mm(fifteen milimetre) dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing C.P. brass angle cock without nuts and pipe 15mm(fifteen milimetre) dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing C.P. brass stop cocks 15mm(fifteen milimetre)dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing PVC connection pipe with brss union 45cms(forty five centimetres) length 15mm(fifteen milimetre) nominal bore including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing brass full way valve with wheel 15mm(fifteen milimetre) nominal bore including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

20mm(twenty milimetre) nominal bore

Providing and fixing Water pump of half HP capacity to Lift rain water Half H P including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Constructing manhole with R.C.C. top slab in 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm nominal size), foundation concrete 1:4;8 (one cement ; four sand : eight graded stone aggregate 40 mm (forty milimetre) nomonal size), inside plastering 15mm (fifteen milimetre) thick with cement mortar 1:3 (one cement : three sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm (twenty milimetre) nominal size finished smooth complete including curing and testing complete including carriage of materials within all leads and lifts :Inside size 800mmx800mm(eight hundred miulimetre into eight hundred milimetre) and 500mm(five hundred milimetre) deep including precast reinforced Cement concrete manhole Cover (Medium Duty) with frame 600 mm dia:-with 200mm (two hundred milimetre) thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying PVC high grade pressure pipe in trenches including fixing of joints properly with approved adhesive complete in all respect including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) P.V.C. plastic pipe 150mm(one hundred fifty milimetre) nominal bore.

(i) P.V.C. plastic bend 150mm(one hundred fifty milimetre) nominal bore.

Providing and fixing cement concrete manhole cover 450x610mm(four hundred fifty into six hundred ten milimetre) weight of cover and frame should not be not less than 38 Kg(thirty eight kilogram) with including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing cement concrete cover 300x300mm(three hundred into three hundred milimetre) with frame for gully trap the weight of cover to be not less than 4.53 kg(four point five three Kilogram including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and placing in horizontal layers filtering media duly graded washed and cleaned gravels 3mm(three milimetre) to 6mm(six milimetre) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing cement concrete man hole cover 500mm(five hundred milimetre) internal dia weight of cover and frame should not be not less than 58 kg (fifty eight kilogram) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Supply and stacking sand in soak pit including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Supply and stacking bricks bats including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing cast iron cowl 75mm(seventy five milimetre) dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing pipes pressure PVC spigot and socket waste and ventilating pipe including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

M/s Lakshay Construction

Arun Kumar Thakur

Yashwant Singh Diwan

P K Construction Shimla Pvt Ltd