Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹69.9 LAccepted-AOC 68 BANK COLONY SUNDER NAGAR PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹79.9 L+₹2.8 L (3.58%)Rejected-AOC NEAR CIVIL HOSPITAL VILLAGE PO CHOWARI DISTT CHAMBA HP | CHOWARI | CHAMBA | HIMACHAL PRADESH | 176302 | 2 | Rejected-AOC OTHER THAN L1 | |
| 3 | 3₹81.1 L+₹4.0 L (5.13%)Rejected-AOC | 3 | Rejected-AOC OTHER THAN L1 | |
| 4 | 4₹82.1 L+₹4.9 L (6.35%)Rejected-AOC VPO BAILLY TEH DALHOUSIE DISTT CHAMBA HP 176303 | DALHOUSIE | CHAMBA | HIMACHAL PRADESH | 176303 | 4 | Rejected-AOC OTHER THAN L1 |
Tender Value
₹96.3 L
EMD Value
₹1.7 L
Closing Date
22 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE YOL
HEADQUARTERS CWE YOL YOL CANTT PIN-176052
ADDN/ALTN OF VARIOUS OTM BUILDINGS AT DALHOUSIE MILITARY STATION
2023_MES_608342_1
CWE/Y-28/2023-24
Open Tender
Civil Works
Item Rate
365 days
Dalhousie
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
Yes
AGE (I) Dalhousie
₹1.7 L
Yes
18 Oct 2023
8 Jul 2023
29 Aug 2023
8 Jul 2023
22 Aug 2023
8 Aug 2023
Amount
Demolition of brick work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.
Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
Dismantling plain or corrugated steel sheets any gauge thickness including Nanital or similar pattern roof covering including ridges complete all as specified and directed.
Dismantling timber in scantling 40 sqcm and over in section un-framed work complete all as specified and directed.
Taking down cement plaster including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed
Taking down and removing chowkats with shutters (without taking off shutters from chowkat) not exceeding 1.50 Sqm each complete all as specified and directed.
Taking down and removing chowkats with shutters (without taking off shutters from chowkat) exc 1.50 Sqm but not exc 4.00 Sqm each complete all as specified and directed. .
Walling of random rubble stone masonry, uncoursed , well bonded, bedded and soilidly hearted, built in CM 1:4, complete all as specified and directed.
All as per srl item no 09 above but except stone.
Aluminium anodised snap grid (powder coated) frame work, grid of size 605 mm X 605 mm as in false ceiling, including hangers 6 mm dia. G.I. (upto 1200mm length) including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with butterfly clips, wall angle of size 24x24mm, main runner (tee) of size 24x38mm,cross tee of size 24x28mm (No of suspenders shall be decided by AGE (I) as per actual site requirement, including 12mm thick, Perforated particle board/tiles for insula-tion and accoustic purposes,60x60 cm in size including necessary scaffolding all as specified and directed.
Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with cerosote oil, complete all as specified & directed.
2nd class hard wood, clean sawn, timber framed and fixed as in scantling complete all as specified and directed.
2nd class hard wood, clean sawn, timber framed and fixed as in scantling for floor complete all as specified and directed.
40mm thick, 2nd class hard woord , Boarding in Floors and Skirting, Planed one side & edges tongued and grooved or rebated butt joints and fixed with screws supplied and fixed, complete all as specified and directed.
40mm thick, 2nd class hard woord , Boarding in Floors , Planed one side & edges tongued and grooved or rebated butt joints and fixed with screws supplied and fixed, for repairs to existing floors in patches, including cutting out, piecing, heading joints etc.complete all as specified and directed.
French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.
French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and directed.
Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, all as specified and directed.
Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley/ eaves/ rain water gutters, drip and straight flashing (length and girth as fixed), fixed with self tapping screws all as specified
Rolled mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to grade Fe 410 -W (Gde-E- 250) quality-A, complete all as specified and as directed.
Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.
35 mm thick 2nd class hard wood (Sal/Hollock) glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc , edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, gauge etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of window/vent shutters as specified in SSR- 2009 Part-I Section 8.24(b) complete all as specified and directed.
2nd class soft wood (Kail) , Plain fillets, square, rectangular or triangular in section, wrought, secured with screws, sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm, complete all as specified and directed.
2nd class hardwood (Sal) plain solid straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
Rendering cement plaster 20mm thick in cement mortar 1:4 on stone masonry or surface other than fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.
Rendering cement plaster 20mm thick in cement mortar 1:6 on stone masonry or surface other than fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.
Preparation of new plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete all as specified and directed.
Preparation of old plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of cement base paint , complete all as specified and directed.
Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of 2 mm thick wall care putty complete, all as specified and as directed by Engr-in-Charge
Preparation of old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of 2 mm thick wall care putty complete, all as specified and as directed by Engr-in-Charge
Preparation of old surfaces of wall by Complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer over and including 2mm thick wall care putty (applied in two layers), finished smooth with sand paper complete all as specified and directed.
Mild steel butt hinges of size 125mm medium weight cold rolled complete all as specified and directed.
Aluminium anodized barrel tower bolt of extruded section of size 200 mm and fixed complete all as specified and directed.
Aluminium handles cast type anodized of size 150 mm complete all as specified and directed.
Preparation of wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Galvanished mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanished wire staples complete all as specified and directed.
Sheet glass, 3 mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.
Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 21 of tender doucments.
m/S Varun Gupta
J M Builders And Engineers
Havish Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .