PROVISION OF ADDITION / ALTERATION AND RENOVATION WORKS IN GANGA BUILDING No. 121 AT DLRL, HYDERABAD

Amount

Demolishing cement concrete nominal concrete 1:3:6 or richer mix (including equivalent design mix) manually / by mechanical means including disposal of material within 50 metres lead as directed.

Material and labour for making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and directed.

Demolition of stone or brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for brick work modular with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) as in sub bases of flooring complete all as specified and directed.

Material and labour for Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with medium shade pigment using 50% white cement 50% Grey cement pigment to match the shade of tiles, including rubbing and cleaning etc. complete on and including 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) complete all as specified and directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 12 mm thick in CM 1:4 on fair faces of brick work or concrete on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for distempering with oil bound washable distemper of approved brand and manufacture to give an even shade for new work (two coats) over and including water thinnable priming coat with cement primer over a coat of 1 mm thick wallputty to make surfaces smooth complete all as specified and directed.

Material and labour for removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc, and applying two coats distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gms per ltr of approved manufacturer and of required shade and colour complete as per manufacturer's specification on walls over 1mm thick putty to make surfaces smooth complete all as specified and directed.

Material and labour for removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc, and apply two coats distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gms per ltr of approved manufacturer and of required shade and colour complete as per manufacturer's specification on ceiling complete all as specified and directed.

Material and labour for preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Material and labour for preparing old plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

Material and labour for finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives new work (two coats) applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 01 mm thick putty to make surfaces smooth all as required and all as specified and directed.

Material and labour for complete removal of existing treatement on ceiling and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm as recommended by the manufacturer over 1 mm thick putty to make surfaces smooth all as required complete all as specified and directed.

Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm complete all as specified and directed.

Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622, of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sq.m including pointing the joints with white cement and matching pigments etc., complete all as specified and directed.

Material and labour for Providing and fixing 1st quality ceramic glazed floor tiles size 450 x 350mm conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by GE in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

Material and labour for Providing and laying vitrified floor tiles in size of tile 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and directed.

Material and labour for Providing and laying double charge vitrified tile polished finish of size 800 x 800mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved brand & manufacturer in all colours and shade, laid on and including 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, piler, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed.

All as per Sl item No. 21 above but as in skirting / dado.

Material and labour for coloured non skid ceramic tiles 9 to 10 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Sl item No. 23 above but as in skirting / dado.

Taking out doors, windows and clerestory window shutters without frame (steel or wood) of area 3 sq. metres and below including stacking within 50 metres lead complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed.

Material and labour for Providing and fixing ISI marked 30mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and directed.

Material and labour for Providing and fixing factory made P.V.C. door frame of size 50 x 47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 02 Nos of 150 mm long brackets of 15 x 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 x 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size complete as per manufacturer’s specification and all as directed.

Material and labour for Providing and fixing factory made panel 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15 x 15 mm for top & bottom rails M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.

Top, bottom and lock rails shall be provided both side of the panel, 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7 mm (5 mm + 2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' channel using PVC solvent adhesive etc. complete all as specified and directed.

Material and labour for Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws 100mm size complete all as specified and directed.

Material and labour for Providing and fixing aluminium tower bolts of size 200 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws complete all as specified and directed.

Material and labour for Providing and fixing aluminium handles 125 mm long, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws including dismantalling complete all as specified and directed.

Material and labour for Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws 250mm size including dismantalling complete all as specified and directed.

Material and labour for Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws including dismantalling complete all as specified and directed.

Material and labour for Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kgs to 80 kgs and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws including dismantaling complete all as specified and directed.

Material and labour for Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one coat on old steel surfaces complete all as specified and directed.

Material and labour for Painting wood work with Deluxe Multi Surface Paint of required shade two coats applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture with French spirit polishing two coats on new works including a coat of wood filler complete all as specified and directed.

Material and labour for preparation of old decorated wooden surfaces of any description not otherwise described over 10cm girth or width and applying one coat of French polishing complete all as specified and as directed.

Material and labour for Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc 15mm dia, medium grade and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Material and labour for Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc 20mm dia GI steel tubes, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Material and labour for Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc 25mm dia, medium grade and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Supply and fix, 1000 Ltrs capacity rotational moulded polyethylene water storage tanks triple layered white (cylindrical vertical with closed threaded lid) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe etc, including dismantling old water tanks complete all as specified and directed.

Material and labour for Providing and fixing PTMT ball cock of 15 mm nominal bore of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P. / H.P.H.D. plastic ball, 105 mm long, weighing not less than 138 gms complete all as specified and directed.

Supply and fixed in repairs 25 mm dia gun-metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fixed in repairs angle stop valves 15 mm bore, cast copper alloy, fancy type chromium plated, screwed down, high pressure with capastan heads, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Material and labour for Providing and fixing unplasticised P.V.C. connection pipe 15 mm nominal bore with 45 cm length with PTMT nuts, collar and bush of approved quality and colour complete all as specified and directed.

Supply and fixed in repair bib taps 15mm bore, two way, cast copper alloy chromium plated, fancy type with capastan heads, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Material and labour for Providing and fixing PTMT, push cock of approved quality and colour 15 mm nominal bore, 98 mm long, weighing not less than 75 gms complete all as specified and directed.

Supply and fixed in repairs pillar tap of 15mm bore for counter top wash hand basin, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed.

Supply and fixed in repairs fancy type pillar tap of 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed.

Material and labour for Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

Material and labour for Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour, 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete all as specified and directed.

Material and labour for Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid including provisioning of 10 litre low level white P.V.C. flushing cistern, flush pipe with manually controlled device (handle lever), conforming to IS : 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.

Material and labour for Providing and fixing water closet squatting pan white Vitreous china Orissa pattern of size 580 x 440 mm with integral type foot rests (Indian type W.C. pan) with 100 mm sand cast iron P or S trap including provisioning of 10 litre capacity low level white P.V.C. flushing cistern, flush pipe with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.

Material and labour for Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by GE.

Supply and fixed in repairs Vitreous China half stall urinal white of size 430 x 260 x 350mm or 340 x 410 x 265mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 40 mm dia CP waste coupling, CP brass urinal spreader, PTMT urinal cock, urinal trap, CP connection of suitable length and fixing with 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

Supply and fix, 12mm thick toughened frosted / tinted glass as in urinal partitions fitted with necessary fixing arrangements with wall and stainless steel pivot including taking down old glass door in all respect complete all as specified and directed.

Supply and fix, 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting / coupling of WHB / sink / urinal complete all as specified and directed.

Material and labour for Providing and fixing white Vitreous China flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required including dismantaling complete all as specified and directed.

Supply and fixed in repairs vitreous china oval shaped counter top wash hand basin white of size 56 x 41 cm excluding taps, waste chain and porcelain plug but including brackets, CP waste fittings 32mm dia including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

Dismantling C.I. pipes 100 mm dia including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre complete all as specified and directed.

Dismantling C.I. pipes 80 mm dia including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead upto 50 metre complete all as specified and directed.

Supply and fix, PVC (SWR) plain floor trap of 75 mm dia, outlet with grating including jointing with solvent cement complete all as specified and directed.

Material and labour for Providing and fixing 75mm dia soil, waste and vent pipes : Sand cast iron S&S pipe as per IS:1729 laid on floors / walls complete all as specified and directed.

Material and labour for Providing and fixing 100mm dia soil, waste and vent pipes : Sand cast iron S&S pipe as per IS:1729 laid on floors on floors / walls complete all as specified and directed.

Material and labour for Providing and fixing bend 100 mm dia sand cast iron S&S as per IS:1729 of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete all as specified and directed.

Material and labour for Providing and fixing terminal guard vent cowl 100 mm sand cast iron S&S as per IS:1729 complete all as specified and directed.

Material and labour for Providing and fixing bend 75 mm dia sand cast iron S&S as per IS:3989 of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete all as specified and directed.

Material and labour for Providing and fixing 75 mm dia plain bend sand cast iron S&S as per IS:1729 of required degree complete all as specified and directed.

Material and labour for Providing and fixing 100 mm dia plain bend sand cast iron S&S as per IS:1729 of required degree complete all as specified and directed.

Material and labour for Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kgs and frame to be not less than 2.70 kgs as per standard design of size 150 x 100 mm size P type with common burnt clay F.P.S. (non modular) bricks of class designation including dismantaling of old one complete all as specified and directed.

Material and labour for MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantaling of old one complete all as specified and directed.

Material and labour for Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture complete all as specified and directed.

Material and labour for extra over brickwork for closing cavity at jambs, cills and heads of opening (supply and fixing of flashing not included) complete all as specified and directed.

Material and labour for Providing and fixing factory made uPVC glazed / wire mesh windows / doors comprising of uPVC multi-chambered frame, sash and million / coupler (where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 & R2 profiles and 2.10mm for seried R3 & R4 profiles confirming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads, interlocks and inline sash adaptor (wherever required) of appropriate dimension), EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded / mechanically jointed duly sealed at

all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof dilicon sealant over backer rod of aprroved size and quality, all complete and conforming to CPWD specification & as directed. Three track three panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track, wool pile nylon rollers with SS 304 body using R3 series with frame (98 mm & above) x (40mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).

Providing and fixing factory made uPVC glazed / wire mesh windows / doors comprising of uPVC multi-chambered frame, sash and million / coupler (wherever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 & R2 profiles and 2.10mm for seried R3 & R4 profiles confirming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads, interlocks and inline sash adaptor (where ever required) of appropriate dimension), EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut

and fusion welded / mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof dilicon sealant over backer rod of aproved size and quality, all complete and conforming to CPWD specification & as directed. Fixed window / ventilator with mullion / transom. Using R1 series with frame (33mm & above) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 metre).

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrative, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed.

Supply and fix, 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix, solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and directed.

Supply and fix, stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed alongwith aluminium anodised mesh of size 10 x 10 x 1.0mm thick fixed with tinned tacks or galvanised wire staples as in panels of wire gauzed shutter complete all as specified and directed.

Material and labour for providing and fixing false ceiling with light weight 19mm thick mineral Armstrong tiles of size 595 x 595mm of model prima fine fissured RH 99 suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T-runner 42mm x 14mm and 0.30mm thick and cross T of size 33mm x 14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall / partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm) x 22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture

smoke detectors etc. wherever required main T - runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification and including dismantaling of existing false ceiling and as per directed.

Material and labour for Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 & IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws and as directed.

Material and labour for Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for for partitions including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 & IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws and as directed.

Material and labour for Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kgs for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate with stainless steel cover plate minimum 1.25 mm thickness complete all as specified and directed.

Material and labour for Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good complete all as specified and directed.

Material and labour for Providing and fixing 125mm long aluminium handles, ISI marked, powder coated as per IS:1868 transparent or dyed to required colour or shade with necessary screws complete all as specified and directed.

Material and labour for Providing and fixing 250mm long aluminium tower bolts, ISI marked, powder coated as per IS:1868 transparent or dyed to required colour or shade with necessary screws complete all as specified and directed.

Material and labour for Providing and fixing 300mm long aluminium sliding door bolts, ISI marked powder coated as per IS:1868, transparent or dyed to required colour or shade with nuts and screws complete all as specified and directed.

Material and labour for Providing and fixing powder coated aluminium grill of approved design / pattern with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed.

Supply and fix, stainless steel grade 304 railing 68mm dia hand rail and 03 Nos 16mm dia horizontal rails and 40mm dia balusters fixed at 900 mm centre to cnetre with clamps and dash fastener including newel post of 75 mm dia with spherical cap fixed at starting and terminal point of railing including 10 mm thick 40cm width toughned glass in between including taking down old stair case railing of any description complete all as specified and directed.

Supply and fix, aluminium composite panel cladding work, composite material having total thickness 4mm with 0.50mm thickness aluminium skin exterior grade PVDF coating with necessary fittings / fixtures and hardware using U brackets made in GI wire as required and mounting on aluminium section 50 x 25 x 1.4mm thick tube bolted to the section to form grid for the cladding complete with weather silicon alongwith the PU foam and all cladding done in tray system or stick system as required complete all as specified and directed.

Supply and fix, brass cutting letters of size 300mm high and 25mm wall thickness, Appolex laquer coated including soldering with lead, buffing and colouring with standard colour ISI standard, MRF brand fixed on existing ACP / any type of wall surfaces with brass bolts and nuts complete all as specified and directed.

Supply and fix, venetian zebra blinds roller type multicolor fiber water resistant, UV protection, transparent, black out suitable for window fixed including taking down old blinds complete all as specified and directed.

Material and labour for Providing and fixing glazing with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) for indoor, window, ventilator shutters and partitions etc., with EPDM rubber / neoprene gasket etc., (Cost of aluminium snap beading shall be paid in basic item) complete all as specified and directed.

Material and labour for Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) for indoor, window, ventilator shutters and partitions etc., with EPDM rubber / neoprene gasket etc., and as directed. (Cost of aluminium snap beading shall be paid in basic item) complete all as specified and directed.

Material and labour for Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l, Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc., Pre-laminated particle board with decorative lamination on both sides complete all as specified and directed.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.

Material and labour for Providing and laying Polished Granite stone flooring Polished Granite stone slab of all colour and texture except, Cherry / Ruby Red in required design and patterns, in linear as well as curvilinear portions of the building with 18 mm thick stone slab over and including 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc., complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc., complete all as specified and directed.

Material and labour for point wiring complete with ISI marked 1.5 Sqmm single core PVC insulated unsheathed cable 1100 Volts grade with multistranded copper conductor drawn through in and including medium grade PVC conduit 20mm dia and accessories concealed in wall suitable for terminal boxes for fixing modular switches, sockets etc including suitable size modular plates concealed in walls and 1.5 Sqmm copper conductor as earth continuity to connect common earth dolly complete for one light/ceiling fan/ exhaust fan point controlled by one 5 Amps one way switch. Note: The quoted rate shall deemed to include for modular cover plates with frame of any colour and metal flush boxes of any type and size.

Material and labour for Wiring for circuit / submain wiring alongwith earth wire with 4 x 10 sq. mm + 2 x 10 sq. mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel conduit 25mm dia and its accessories as required complete all as specified and directed. Note: Six runs of cable and one run of conduit and accessories shall be measured as one unit.

Material and labour for Wiring for circuit / submain wiring alongwith earth wire with 4 x 6 sq. mm + 2 x 6 sq. mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel conduit 25mm dia and its accessories as required complete all as specified and directed. Note: Six runs of cable and one run of conduit and accessories shall be measured as one unit.

Material and labour for Wiring for circuit / submain wiring alongwith earth wire with 4 x 4 sq. mm + 2 x 4 sq. mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel conduit 25mm dia and its accessories as required complete all as specified and directed. Note: Six runs of cable and one run of conduit and accessories shall be measured as one unit.

Material and labour for Wiring for circuit / submain wiring alongwith earth wire with 2 x 6 sq. mm + 1 x 6 sq. mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel conduit 20mm dia and its accessories as required complete all as specified and directed. Note: Three runs of cable and one run of conduit and accessories shall be measured as one unit.

Material and labour for Wiring for circuit / submain wiring alongwith earth wire with 2 x 4 sq. mm + 1 x 4 sq. mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel conduit 20mm dia and its accessories as required complete all as specified and directed. Note: Three runs of cable and one run of conduit and accessories shall be measured as one unit.

Material and labour for Wiring for circuit / submain wiring alongwith earth wire 2 x 2.5 sq. mm + 1 x 2.5 sq. mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel conduit 20mm dia and its accessories as required each point 10 mtrs complete all as specified and directed. Note: Three runs of cable and one run of conduit and accessories shall be measured as one unit.

Supply and fix, modular type 6 Amps, 5 pin mulitipurpose switch, socket outlet 3 Nos and 16 Amps multipurpose switch, socket outlet 01 No. on one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets and including all internal electrical connections with copper conductor complete all as specified and directed.

Supply and fix, modular type 6 Amps, 5 pin mulitipurpose switch, socket outlet 4 Nos. on one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets and including all internal electrical connections with copper conductor complete all as specified and directed.

Supply and fix, 3 pin, 5/6 A modular socket outlet and 5/6 modular switch connection as required complete all as specified and directed.

Supply and fix, 6 pin, 5/6 & 15/16 A modular socket outlet and 15/16 modular switch connection as required complete all as specified and directed.

Supply and fix, modular sockets, 6 Amps, 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix, modular sockets, 16 Amps, 5 pin combined 2 module complete all as specified and directed.

Supply and fix, two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate as required complete all as specified and directed.

Supply and fix, 20 A, 240 V, SPN industrial type socket outlet with 2 pole and earth, metal enclosed plug top alongwith 20 A 'C' curve, SP, MCB in sheet steel enclosure on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc., as required complete all as specified and directed.

Supply and fix, 20 A, 415 V, TPN industrial type socket outlet with 4 pole and earth, metal enclosed plug top alongwith 20 A 'C' curve, TP, MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket out let and complete with connections, testing and commissioning etc., as required complete all as specified and directed.

Supply and fix, 8 way, double door surface / recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required complete all as specified and directed.

Supply and fix, 8 way, double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface / recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, internal connections, powder painted including earthing etc. as required (but without MCB / RCCB / Isolator) complete all as specified and directed.

Supply and fix, 6 way, SPN, double door, MCB DB type with 200 Amps rating busbar and suitable arrangement for mounting MCB's including taking down old one complete all as specified and directed.

Supply and fix, 8 way, SPN, double door, MCB DB type with 200 Amps rating busbar and suitable arrangement for mounting MCB's including taking down old one complete all as specified and directed.

Supply and fix, 63 A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc., as required complete all as specified and directed.

Supply and fix, 100 A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc., as required complete all as specified and directed.

Supply and fix, 40 Amps rating, double pole, (single phase and neutral), 240 V, Residual Current Circuit Breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc., as required complete all as specified and directed.

Supply and fix, 5 A to 32 A rating, 240/415 V, 10 kA, 'C' curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc., as required complete all as specified and directed.

Supply and fix, round shape light fitting 12 watts, 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix, Garden light fitting with pressure die cast powder coated housing with PC diffuser, efficient high output COB LED for Garden, Pathway etc., lighting IP 66 protection and all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fix, LED luminaire 600 mm x 600 mm, 36 watts, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix, LED light fitting 1 x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix, LED street light fitting 35 Watts, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, LED lamp and 25mm dia GI pipe bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and directed.

Dismantling of ceiling fan and painting the same with with one coat with spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, re-fixing the same as required complete all as specified and directed.

Removing of old unserviceable conduits and Supply and fix, DLP UPVC adaptable trunkintg system of three section with accessories for mounting of Equipment Control Wires, Telecommunication Wires and electrical cables with mounting complete all as specified and directed. Note: One Running Meter include with base body 150 x 50mm, flexible full cover width of 40mm, seperation partition for 105 x 50 Trunking, Base Joint (Body Joint - for aligning bases for installation, cover joint for 40mm width, left or right end cap & Internal / External Angle).

Dismantling the existing unserviceable LT panel board and supply & fabrication of LT Panel Board CPRI approved cubical type made of 2 mm thick CRCA steel sheet, indoor type with IP 43 grade of protection CRCA sheet powder coated with support of angle iron 50 x 50 x 6 mm angle iron bottom legs with minimum height of 20 cm frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front and back openable inspection doors PVC sleeved aluminium bus bar of 600 A capacity for each phase and half neutral fixed on suitable insulator all housed in suitable bus bar chamber and provision and fixing of digital type multi function meter with V, A, P.F, HZ & KVAR operated complete - 01 Set alongwith provision of necessary cable entry / exit boxes for all

Dismantling the existing unserviceable LT panel board and supply & fabrication of LT Panel Board CPRI approved cubical type made of 3.15 mm thick CRCA steel sheet, outdoor type with IP 65 grade of protection CRCA sheet powder coated with support of angle iron 50 x 50 x 6 mm angle iron bottom legs with minimum height of 20 cm frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front and back openable inspection doors PVC sleeved aluminium bus bar of 600 A capacity for each phases and half neutral fixed on suitable insulator all housed in suitable bus bar chamber and provision and fixing of digital type multi function meter with V, A, P.F, HZ & KVAR operated complete - 01 Set alongwith provision of necessary

Supply & installation of earthing station as per relvant IS/IEC standard complete with 600 x 600 x 3.15 mm copper plate and conductors are made of 70 sqmm non corrosive standard copper confirming to IEC 62561 with minimum thickness of 1.7mm per standard and (2 runs of 3m with exothermically welded to plate ensure that the plates are buried deep in soil. Busbar of 25 x 6 x 300 mm should be connected in the top portion and to exothermically welded with 70 sqmm wire to ensure the non corrosive contact and earth enhancement compound shall be chemically insert to sub soil it shall not pollute the envoironment complete all as specified and directed.

Material and labour for earthing complete with GI earth plate electode 600 x 600 x 6 mm buried directly in ground vertically, earth pit not less then 2.25 mtr deep below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground and connected to GI earth strip 25 x 4 mm size by means of bolts, nuts & washers of galvanised iron or steel, GI earth strip shall be protected by 40 mm dia GI pipe (light grade) upto connecting point, watering pipe 20mm dia GI pipe light grade, GI wire mesh funnel, alternate layers of charcoal and salt including necessary excavation and earth work in any type of soil, PCC (1:3:6) type C1 earth chamber, 40mm thick RCC cover 1:2:4 type B1 mix with 6mm dia nominal reinforcement @ 100mm c/c both ways complete all as shown in electrical plate No 3 connected to earth test point, including testing on completion, complete all as specified and directed.

Note: Earth strip beyond 7.5 Mtr, if required shall be measured and paid seperately under respective item of schedule.

Supply and lay Earth continuity conductor GI strip 25 x 4mm as main earthing lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing as required complete all as specified and directed.

Supply & lay, cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified and directed.

Supply & lay, cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade upto 35 sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required complete all as specified and directed.

Cutting existing GI tubing upto 50 mm dia for alterations complete all as specified and directed.

Supplied and laid 50 mm (2.0”) dia galvanized pipes, 'medium grade' for drinking water (Manjeera water) including fittings complete all as specified and directed.

Supplied and laid 40 mm (1.5”) dia galvanized pipes, 'medium grade' including fittings complete all as specified and directed.

Supplied and laid 25 mm (1.0”) dia galvanized pipes, 'medium grade' including fittings complete all as specified and directed.

Supplied and laid 15 mm (1/2”) dia galvanized pipes, 'medium grade' including fittings complete all as specified and directed.

Supply and fix, cast copper alloy stop valve, 50 mm size screwed down, high pressure with butterfly handle screwed both end for iron pipe and fixed complete all as specified and directed.

Supply and fix, cast copper alloy stop valve, 25 mm size screwed down, high pressure with butterfly handle screwed both end for iron pipe and fixed complete all as specified and directed.

Supply and fix, ball brass valves high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

The panel shall be compatible for IBMS system with open protocol BAC net / Modbus over IP complete as per specifications and as directed

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base with all connections as required complete all as specified and directed.

Supplying, installation, testing & commissioning of addressable horn cum strobe as required complete all as specified and directed.

Supplying, installation, testing & commissioning of fault isolator with base as required complete all as specified and directed.

Supplying, installation, testing & commissioning of addressable manual call point as required complete all as specified and directed.

Supplying, installation, testing & commissioning of response indicator on surface / recessed MS box having two LED, metallic cover with all connections etc as required complete all as specified and directed.

Supplying & drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of 1.0 speaker cable single pair, 2 core, 1.5 sqmm size including connections and interconnections as required complete all as specified and directed.

Supply, installation, testing & commissioning of 25 mm outer dia CPVC pipe with end caps including making air sampling opening of appropriate dia on appropriate interval and all accessories as required (rate for area protected in sqm) complete all as specified and directed.

N Harikrishna Rao and co (BID ID -3308061)

M/s K Venkateswara Rao (BID ID -3304637)

PAVAN ENTERPRISES (BID ID -3308118)

SHAH ENTERPRISES (BID ID -3308631)