Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹26.8 L
EMD Value
₹53,640
Closing Date
22 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
COL AMIT CHAUBEY
HQ 137 Works Engineer, PIN-914 137, C/o 99 APO
SPL REPAIR OF BLDG NO T-510 ANDT-284XXXXX AT ZAKHAMA MIL STN
2026_MES_792003_1
8156
Open Tender
Civil Works
Item Rate
180 days
Zakhama
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) Zakhama
₹53,640
1 Oct 2026
1 Oct 2026
29 Oct 2026
1 Oct 2026
22 Oct 2026
15 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the same out of premises complete all as specified and as directed at site. | 100 | Sqm | - | - |
| 2 | M& L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile including Screed bed or bedding layer of mortar 15 mm thick in CM for laying floor finishes in Cement mortar (1:6), complete all as specified and as directed at site. | 85 | Sqm | - | - |
| 3 | M&L Chequered cement concrete tiles 250mmx250mm25mm thick over 15mm thick screed bedding layer of cement mortar in CM(1:4) for laying floor finishes set jointed with grey cement and pigment and pointed in neat cement slurry in floors, complete all as specified and as directed at site. | 15 | Sqm | - | - |
| 4 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and as directed at site. | 555 | Sqm | - | - |
| 5 | S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping, screw , complete all as specified and as directed at site. | 501 | Sqm | - | - |
| 6 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridges/cladding to wall/Valley gutters , fixed with self tapping screws ,complete all as specified and as directed at site. | 24 | Sqm | - | - |
| 7 | S&F 0.63mm thick plain galvanised, mild steel sheeting, in stepped flashing/wall (measured as the minimum rectangle from which the pieces can be cut) etc and fixed with nail complete all as specified and as directed at site. | 30 | Sqm | - | - |
| 8 | Dismantling boarding of any description, fixed in any position with nails,complete all as specified and as directed at site. | - | Sqm | - | - |
| 9 | M&L 2nd class hardwood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 22mm laps and fixed,complete all as specified and as directed at site. | 28.5 | Sqm | - | - |
| 10 | Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position , complete all as specified and as directed at site. | 1.35 | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
8156Tender_Doc.pdf
Tender Documents • 1.84 MB
BOQ_888000.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .