REPAIR/REPLACEMENT OF CERTAIN MISC B/R AND E/M WORKS IN DM RANGE UNDER GE (AF) TEZPUR.

Amount

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as directed.

Dismantling posts or struts (wood,steel or R.C.C.) any section,embedded in concrete,masonry, brickwork etc.,including taking out embedded portion and making good disturbed ground, complete all as directed.

Demolition of brickwork or stone/boulder masonry, laid dry,complete all as specified and directed

Materials and Labour for for plain cement concrete (1:2:4) Type B-2 using 40 mm graded aggregate,in foundations, filling and mass concrete including demolition of cement concrete of any description and in any postion complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Materials and Labour for for plain cement concrete (1:3:6) Type C-2 using 40 mm graded aggregate,in foundations, filling and mass concrete including demolition of cement concrete of any description and in any postion complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from worke and including demolition of cement concrete of any description and in any postion complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B2 using 40 mm graded aggregate in surface channels and drains and including demolition of cement concrete of any description and in any postion complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding etc.,including demolition of existing cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) [Considering 0.10 CuM per SqM],complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:2:4) type B2 using 40 mm graded aggregate as in floor/paving/ hardstanding etc.,including finishing surface even and smooth without using extra cement and including demolition of existing cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) [Considering 0.10 CuM per SqM],complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches,pillars,etc,but excluding ashlar facings,dressed stonework and precast concrete articles,complete all as specified and directed

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4),complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 and not exc. 4.00 Sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sq. M each, complete all as directed.

Dismantling timber scantlings,unframed work,40 sq. cm and over in section, in any position complete all as specified and as directed.

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

Materials and Labour for,second class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and directed.

Supply and Fix, 35 mm thick,plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,complete all as specified and directed.

Supply and Fix, 35 mm thick, second class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24 (a) and fitted to chowkhats,complete all as specified and directed.

Supply and Fix, 30 mm thick, second class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24 (b) and fitted to chowkhats,complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, complete all as specified and directed.

Supply and Fix, medium wight, cold rolled mild steel butt hinges,100 mm size,complete all as specified and directed

Supply and Fix, medium wight, cold rolled mild steel butt hinges, 75 mm size,complete all as specified and directed

Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.

Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 100 mm long complete all as specified and directed.

Supply and Fix, aluminium handles, cast type, anodized, 150 mm size, complete all as specified and directed.

Supply and Fix, aluminium handles, cast type,anodized, 100 mm size, complete all as specified and directed.

Supply and Fix,aluminium alloy, anodised,sliding door bolt,length of bolt 200 mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.

Supply and Fix,floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring,fixed in floor,overall length of cover plate 140mm, complete all as specified and directed.

Supply and Fix,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Material and Labour for, 3 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane,complete all as specified and directed.

Material and Labour for, 3 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane,including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones,complete all as specified and directed.

Supply and Fix in repair,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Materials and Labour for, aluminium (extruded section) body door closer hydraulically regulated, designation No. 3,universal type,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed,including taking down existing unserviceable door closer, complete all as specified and directed.

Materials and Labour for, glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming to IS 15622,Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,, complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key,scrubbing down with water etc.,complete all as specified.

Complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over a coat of primer over and including 1mm thick wall care putty, complete all as specified and directed.

Material and Labour for preparing old surfaces plastered or unplastered and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm,on walls, complete all as specified and directed. Notes:- (i) Painting shall be done in camouflage pattern as per existing shade(s) and pattern(s). (ii) The Contractor shall furnish guarantee for the exterior acrylic emulsion paint and shall be responsible for effectiveness of the UV Resistance, Alkali & Fungal Resistance and Dirt Resistance of the painted areas during the guarantee period.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:4) on fair faces of brick work or concrete surface in walls,complete all as specified and directed.

Material and Labour for applying two coats of cement-based paint, white or tinted to new plastered surfaces on walls including priming with alkali resistant priming paint and including preparation of surfaces complete all as specified and directed.

Material and Labour for preparation of old painted surfaces of CGI sheet roof/wall cladding surfaces and applying one coat of anti corrosive roof paint,complete all as specified and directed. [Make:- Berger 'Antisol'/Shalimar'Corugal'/Asian Paints'Tractor Enamel Roof Paint'/J&N 'Coptic']

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new or previously untreated steel and iron surface of any description,over 10 cm in width or girth,not otherwise described,including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new or previously untreated steel and iron surface of any description,n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new or previously untreated wood or wood based surface of any description,over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

Supply and Fix in repairs, vitreous China wash basin, white, flat back, size 550 X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets,complete all as specified and directed.

Supply and Fix in repairs, vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding, complete all as specified and directed.

Supply and Fix in repairs,vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),complete all as specified and directed.

Supply and Fix in repairs,plastic water closet seat,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed.

Supply and Fix PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed.

Supply and Fix in repairs, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.

Supply and Fix in repairs,stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions,15 mm bore, complete all as specified and directed.

Supply and Fix in repairs, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, including dismantling of existing asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings,complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed. Notes:- (i) The existing ridge, valley, cladding to wall and gutters etc. sheets are deemed to be dismantled along with the roofing sheets. (ii) Old unserviceable sheets will be sold to the Contractor under relevant item in Schedule of Credit.

Materials and Labour for,steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new or previously untreated steel and iron surface of any description,over 10 cm in width or girth,not otherwise described,including preparation of surfaces complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Materials and Labour for, 16 mm outer diameter of pipes, 3-layer PP-R (P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings,fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed.

Materials and Labour for, 20 mm outer diameter of pipes, 3-layer PP-R (P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings,fixed complete to walls,ceilings or in floors etc.,complete all as specified and directed.

Material and Labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I ,including ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed and including dismantling existing water tanks exc. 250 but not exc.500 litres capacityand removing to store, complete all as specified and directed.

Material and Labour for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I ,including ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed and including dismantling existing water tanks exc. 500 but not exc.1000 litres capacity and removing to store, complete all as specified and directed.

Supply Only,barbed wire, galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings ,complete all as specified.

Fixing Only galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. , complete all as specified and directed. Notes:- (i) Each line wire will be measured. (ii) Supply of barbed wire and steel wire will be measured and paid seperately.

Fixing Only,chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts,etc.including provision of binding wire,complete all as specified and directed. Note:- Supply of chain link fencing and wire will be measured and paid seperately.

Supply Only,Chain link MS galvanisd fencing, any size or type,complete all as specified.

Materials and Labour for, rolled mild steel Fe 410-W (Gde-E 250) Quality 'A', in joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated),complete all as specified and directed.

Supply and Fix, mild steel screw bolts (machine made), with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt exc.5 cm but n.exc.10 cm long, complete all as specified and directed.

Supply and Fix, mild steel round bars,Gde-I,IS 432(Part-I), 10 mm dia.,cut to length, bend to shape required including cranking, bending, hooking ends and securing to fencing post as in stiffners to GI Chain Link fencing, complete all as specified and directed.

Materials and Labour for mild steel works,hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Materials and Labour for,chequered ceramic tiles,coloured,12 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, conforming to IS 4457-2007,in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed. MAKE:- (Johnson ‘Hi-Traffic’/ Kajaria ‘Duratech’/ Regency 'Dura')

Cleaning of septic tanks/sewage sumps /blocked manholes etc by blocking temporarily the inlet line with appropriate wooden plugs and bailing/pumping out water in liquid/semi liquid state and scraping out sludge, organic matter/inorganic matter, soft/semi solid material using the mechanical cleaning devices in compliance of section 5 and protective gear and saftey devices in compliance of section 4 of "The Prohibition of Employment as Manual Scavengers and their Rehabilitation Act 2013" and removing sludge to a distance n exc 50 metres away from starting point and depositing in pits not exc 10 Sqm on plan and n exc 1.5 m in depth,covered by soft/loose soil to thickness not less than 30 cm from existing ground level including sprinkling of bleaching powder over the area of trenches and on the cleared septic tank/sewage sump/manhole and including necessary earth work in soft/loose soil,complete all as specified and directed. (Volume of sludge in earth pit shall be measured)

Bailing out waste water from septic tank/sludge chamber/soakage well up to top of sludge /broken brick media using mechanical cleaning devices in compliance of section 5 and protective gear and saftey devices in compliance of section 4 of "The Prohibition of Employment as Manual Scavengers and their Rehabilitation Act 2013",and disposal of the same to a distance n exc 50 metres away from starting point by depositing in pits not exc 10 Sqm on plan and n exc 1.5 m in depth,covered by soft/loose soil to thickness not less than 30 cm from existing ground level including sprinkling of bleaching powder over the area of trenches and on the cleared septic tank/sludge chamber/soakage well and including necessary earth work in soft/loose soil,complete all as specified and directed.

Materials and Labour for,Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4),complete all as specified and directed.

Materials and Labour for flush pointing to stone sett paving any description in cement mortar 1:4,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one light/fan point controlled by one switch,including taking down carefully existing copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls,floors etc., complete all as specified and directed.

All as per Ser item No 78 here in before but for 5 amps socket point on independent board.

All as per Ser item No 78 here in before but for 5 amps socket point on same board controlled by another switch.

All as per Ser item No 78 here in before but for 5 amps socket point on independent board but below the switch board of light points in the same vertical plan.

All as per Ser item No 78 here in before but for One light point controlled by 2 Nos 2 way switch.

All as per Ser item No 78 here in before but for One bell point controlled by one bell push.

Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 15 amps socket point independent board, including taking down carefully existing copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls,floors etc.,complete all as specified and directed.

Materials and Labour for point wiring with 4.00 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 2.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 20/25 Amps Power Unit on independent board, including taking down carefully existing copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls,floors etc.,complete all as specified and directed.

Supply and Fix, Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

Supply and Fix,switch piano, flush button, single pole, one way, 6 Amps, complete all as specified and directed.

Supply and Fix, switch piano,flush button,single pole,two way,6 Amps, complete all as specified and directed.

Supply and Fix, socket outlet 2 in 1, 3 pin, 6A, complete all as specified and directed

Supply and Fix,socket outlet 3 pin 6A/16A, 5 in 1 flush type, complete all as specified and directed.

Supply and Fix,switch piano,flush button, single pole, one way, 16 Amps, complete all as specified and directed.

Supply and Fix stepped type electronic fan regulator, flush type,on existing phenolic laminated sheet etc. as required , complete all as specified and directed.

Supply and Fix,bell push, flush type,single pole,6 Amps, complete all as specified and directed.

Supply and Fix,Bell multi music type, AC 230 Volts,complete all as specified and directed.

Supply and Fix,MCB protected power unit with one 25 amps socket with one 3 Pin Plug Top including MCB DP rating 25 Amp and starter 25 Amps with six module plate and flush metal GI box,complete all as specified and directed. [Cat No- DHDUCDP0253016-25 (25 Amps) of Make Havells OR equivalent Model of Make Legrand /L&T.]

Supply and Fix,LED batten with fire retardant poly carbonate housing and opal polycarbonate diffuser, with white LEDs,1X20 W,lumen efficacy 100lm/W, with electronic driver complete with all accessories internally pre wired,including lamp,complete all as specified and directed. [Cat No. LCTLN-20-CDL of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE' ]

Supply and Fix in repairs, LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. [Cat No. LSTS-30-CDL-M of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE' ]

S&F street light bracket fabricated out of GI Tubing light grade 25 mm bore Bend to the shape as directed and of length 0.75 mtr complete with mounting MS clamp of flat iron size 40X5mm of suitable length 02 pairs incl nut bolts etc of suitable size, including taking down old unserviceable one all as specified and directed by Engr In charge.

Supply and Fix, Lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and directed.

Supply and Fix,10 Watts retrofit LED Lamp (Spiral B-22 base),complete all as specified and directed. [Cat No. LHLDDDEAIA5R010 of Make 'Havells' or equivalent Model of Make 'Wipro'/'Philips'/ 'GE'/'Crompton Greaves']

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing and capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for sub main including taking down carefully existing unserviceable sub main wiring of any size (2 runs single core including earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,of any size (2 runs single core including earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed..

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing and capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for sub main including taking down carefully existing unserviceable sub main wiring of any size (2 runs single core including earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,of any size (2 runs single core including earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed..

Taking down MCB DB/main switch of any description and making good disturbed surface of wall/floor complete all as specified and directed.

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral,complete all as specified and directed. [Cat No. 5076 11 of Make Legrand or equivalent Model of Make L&T/Hager/ Seimens/GE/ Schneider/ ABB]

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 4 way, with 200 Amps rated bus bar, Single Pole & Neutral,complete all as specified and directed. [Cat No. 5076 10 of Make Legrand or equivalent Model of Make L&T/Hager/ Seimens/GE/Schneider/ ABB]

Supply and Fix, miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, C curve, 6 to 32 Amps complete all as specified and directed.

Supply and Fix, miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA, C curve, 6 to 32 Amps complete all as specified and directed.

Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead wire 4 mm dia. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No 3 of SSR Part –I (2009) including testing on completion.

Supply and Fix in repairs,switch socket combination 2 in 1,6A,flush type, complete all as specified and directed.

Supply and Fix in repairs,switch socket combination 3 pin 6A/16A, 5 in 1 flush type, complete all as specified and directed.

Supply and Fix in repairs,MCB protected power unit with one 25 amps socket with one 3 Pin Plug Top including MCB DP rating 25 Amp and starter 25 Amps with six module plate and flush metal GI box,complete all as specified and directed. [Cat No- DHDUCDP0253016-25 (25 Amps) of Make Havells OR equivalent Model of Make Legrand /L&T.]

Supply and Fix in repairs,stepped type electronic fan regulator, flush type,on existing phenolic laminated sheet etc. as required , complete all as specified and directed.

Supply and Fix in repair, Lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and directed.

Supply and Fixin repairs,Bell multi music type, AC 230 Volts,complete all as specified and directed.

Supply and Fix in repair, miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, C curve, 6 to 32 Amps complete all as specified and directed.

Supply and Fix in repairs,miniature circuit breaker (MCBs) triple pole, & neutral, 415 Volts, 10KA, C curve, 63 Amps complete all as specified and directed.

Supply and Fix in repairs, miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA, C curve, 6 to 32 Amps complete all as specified and directed.

Supply and Fix in repairs,bell push, flush type, single pole, 6 Amps, complete all as specified and directed.

Supply and Fix in repairs, switch piano, flush button, single pole, one way, 6 Amps, complete all as specified and directed.

Supply and Fix in repairs,LED batten with fire retardant poly carbonate housing and opal polycarbonate diffuser, with white LEDs,1X20 W,lumen efficacy 100lm/W, with electronic driver complete with all accessories internally pre wired,including lamp,complete all as specified and directed. [Cat No. LCTLN-20-CDL of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE' ]

Supply and Fix in repairs,10 Watts retrofit LED Lamp (Spiral B-22 base),complete all as specified and directed. [Cat No. LHLDDDEAIA5R010 of Make 'Havells' or equivalent Model of Make 'Wipro'/'Philips'/ 'GE'/'Crompton Greaves']

Supply and Fix,3-Pin plug top 6 Amps.,complete all as specified and directed. (Code No.39571 of Make Anchor or equivalent of Make Kinjal/Maru)

Supply and Fix,3-Pin plug top 16 Amps.,complete all as specified and directed. (Code No.39582 of Make Anchor or equivalent of Make Kinjal/Maru)

Taking down fan,sealing cable end,dismantling blades and removing fan and blades to store, complete all as specified and as directed.

Dismantaling of parts of ceiling fan 1200 mm/1400 mm sweep,removing burnt out windings with insulating materials,cleaning throughly internally and externally,complete all as specified and directed.

Materials and Labour for,rewinding fan motor of ceiling fan 1200 mm/1400 mm sweep with super enamelled copper wires of existing size including provision of all insulating materials and varnishing,complete all as specified and as directed. NOTE:-Rewinding woks shall be carried out through authorised technicians of the OEMs as approved by GE.

Lubrication of bearing / bushes of ceiling fan 1200 mm/1400 mm sweep using fresh lubricant all as per OEMs reccommendations,replacement of defective parts,re-assembling and testing complete all as specified and directed. NOTES:- (i) Repair woks shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement and rewinding of burnt out windings of fan motor will be measured and paid separately.

Supply Only,Chrome Steel Ball Bearing,size 6201/6203 for ceiling fan as per OEMs specifications. (Make: TATA/NBC/SKF)

Supply Only,Capacitors for electric fan motors, 2.5 mfd, 440 V conforming to IS:1709 (Cat No. QHPCWC5002X5 of Make Havells or equivalent Model of Make UNIVERSAL/EPCOS)

Supply Only,Gun Metal Bushing/Sleeve Bearing of suitable for shaft size of ceiling fan as per OEMs specifications..

Supply Only, Rubber bushing for upper end clamp of down rod in ceiling fan as per OEMs specifications.

Supply Only Down rod for ceiling fan as per OEM's specifications.

Supply Only,split shackle clips and fixing/hanging arrangement with clamps,nuts, bolts, washer and split pins for ceiling fan as per OEMs specifications..

Materials and Labour for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust etc. including writing MES No.,complete all as specified and as directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan,complete all as specified and directed. Note:- Ceiling fans taken down vide Serial Item No. 125 here in before shall be hanged in original position after repairs.

Taking down carefully exhaust fan 300 mm/450 mm size, dismantaling of parts,cleaning throughly internally and externally,lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling,complete all as specified and directed. NOTES:- (i) Repairs shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement and rewinding of burnt out windings will be measured and paid separately.

Removing burnt out windings with insulating materials,cleaning throughly,rewinding fan motor of exhaust fan 300 mm/450 mm size with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, complete all as specified and directed. NOTE:-Rewinding shall be carried out through authorised technicians of the OEMs as approved by GE.

Fixing Only,exhaust fan 300 mm/450 mm size,in original position including testing and commissioning,complete all as specified and directed. Note:-Exhaust fans taken down vide Serial Item No. 136 here in before shall be fixed in original position after repairs.

Supply only, chrome steel ball bearings, size 6001/6002 for exhaust fan as per OEMs specifications. (Make: TATA/NBC/SKF)

Supply Only, Fan blades,suitable for 300 mm sweep exhaust fan as per OEM's specifications.

Supply Only, Fan blades,suitable for 400 mm/450 mm sweep exhaust fan as per OEM's specifications.

Supply Only,Capacitors for electric fan motors,4 mfd conforming to IS: 1709 (Cat No. QHPCWC5004X0 of Make Havells or equivalent Model of Make UNIVERSAL/EPCOS)

Materials and Labour for painting of exhaust fans 300mm/400mm/450mm size complete with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust etc. including writing MES No.,complete all as specified and as directed.

Taking down carefully air circulator fan/ pedestal fan 450 mm sweep, dismantaling of parts,cleaning throughly internally and externally,lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, complete all as specified and directed. NOTES:- (i) Repairs shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement and rewinding of burnt out windings will be measured and paid separately.

Removing burnt out windings with insulating materials,cleaning throughly,rewinding fan motor of pedestal fan /air circulator fan 450 mm sweep with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, complete all as specified and directed. NOTE:-Rewinding shall be carried out through authorised technicians of the OEMs as approved by GE.

Fixing Only,pedestal fan/air circulator fan 450 mm sweep,in original position including testing and commissioning,complete all as specified and directed. Note:-Exhaust fans taken down vide Serial Item No. 144 here in before shall be fixed in original position after repairs.

Supply only, chrome steel ball bearings suitable for pedestal fan/air circulation fan as per OEMs specifications. (Make: TATA/NBC/SKF)

Materials and Labour for painting of pedestal fan /air circulator fan 450 mm sweep complete with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust etc. including writing MES No.,complete all as specified and as directed.

Supply and Fix,PVC insulated and FR PVC round sheathed cable with copper conductor (flexible),nominal area of conductor 1.5 sq mm, 3 core, 1100 Volt, conforming to IS 694 including taking down existing unserviceable cable,complete all as specified and directed.

Taking down carefully, existing defective storage type water heater (geyser) of Capacity 25/50 Litres of any Make for repairing, including replacement of defective spares as required including descaling of storage tanks internally, brazing of leakage if any in tanks and including replacement of terminals with defective connection wires and reinstallation of the geyser in original position including testing and commissioning,complete all as specified and directed. NOTES:- (i) Repairs shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement will be measured and paid separately.

Materials and Labour for painting of storage type water heater (geyser) of Capacity 50 Litres complete with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust etc. including writing MES No.etc.,complete all as specified and as directed.

Materials and Labour for painting of storage type water heater (geyser) of Capacity 25 Litres complete with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust etc. including writing MES No.etc.,complete all as specified and as directed.

Supply Only,Heating Element, 2000 Watts for geyser as per OEMs specifications.

Supply Only,Thermostat, stem type, adjustable upto 75 Degree Celcius, ISI Marked (IS 3017).

Supply Only,brass pressure relier valve suitable for geyser as per OEMs specifications.

Supply Only,Glass Incandescent Electric Water Heater Indicator Lamp, in multi-color caps as per OEMs specifications..

Supply Only,apparatus plate suitable for geyser as per OEMs specifications.

Supply Only,glass wool for insulation purpose suitable for geyser as per OEMs specifications.

Supply Only,stainless steel storage tank suitable for 25 Litres capacity geyser as per OEMs specifications.

Supply Only,stainless steel storage tank suitable for 50 Litres capacity geyser as per OEMs specifications.

Supply Only,600 mm long,PVC Hot/Cold water connections,15mm size,with brass nuts .

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Supply Only,brass non return valve,15 mm size suitable for geyser as per OEMs specifications.

Supply and Fix in repairs, stop valves, cast copper alloy,screwed down,high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix in repairs,single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240V, complete all as specified and directed. [Cat No. 5078 11 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/ GE/ Schneider/ABB]

Supply and Fix,PVC insulated and FR PVC round sheathed cable with copper conductor (flexible),nominal area of conductor 4.0 sq mm, 3 core, 1100 Volt, conforming to IS 694 including taking down existing unserviceable cable,complete all as specified and directed.

Supply and Fix in repairs, LED post top light fittings, 40 Watts,CCT 5700°K,Power Factor >95%, AC input voltage 120V-277V,surge protection 5 KV, with aluminium alloy power coated housing and aluminium bright anodised housing, opal polycarbonate diffuser and degree of protection IP-65, complete all as specified and directed. Make :- Crompton (Part No.- LPTO-40-CDL) or equivalent Model of Make in PS.

Supply and Fix in repairs, LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. [Cat No. LSTS-70-CDL-M of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE' ]

Supply and Fix in repairs, LED foodlight luminaire,150 Watts,with pressure die-cast aluminium housings powder coated, control gear compartment, pressure die-cast aluminium frame powder coated with toughened glass,CRI >70, CCT 5700 °K, Power Factor >95%, THD <10%, Driver Effciency >85%, lumen efficacy >110 Lm/W, AC input voltage 120V-270V, surge protection 4 KV internal & 10 KV external and degree of protection IP 66,complete all as specified and directed. [Cat No. LFLN-150-CDL/60-M of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE' ]

Disconnecting/Taking down unserviceable Street / Perimeter / Security Roadway / Mast Light fittings from pole/Structure and repair / replacement of worn out wirings, connector, cleaning of fittings& covers, replacement of driver etc. and re assembling the same after repair, testing and refixing in original position and reconnecting with existing / new electrical line,complete all as specified and directed. Notes :- (i) Spare and connection cable will be measured and paid separately under relevent items here in after. (ii) Cost of T&P item shall be deemed to be included in the quoted rates.

Supply only LED driver suitable for 70/75 Watt open type complete all as specified as directed. Make Philips/Crompton/Bajaj

Supply and Fix in repairs, bracket for street light fittings, made out of 40 mm bore galvanized steel tubing, medium grade, (1.50 RM Approx), bent to shape required and fixed to pole with FI clamp 40 X 5 mm, nuts, bolts and washers, complete all as specified and directed.

Supply, installation, testing and commissioning of Street Light Panel (out door type) 3 Phase, 415 Volt 6 KW with digital type timer, contactor rating 32 Amp TP, including MCB TPN suitable size,the panel fitted on frame of ISA 50 mm x 50 mm x 5mm at a height of 0.5 Meters including PCC foundation (1:2:4) type B1, painting etc, complete all as specified and directed. [Havells Cat No IHXTS03060 or equivalent Model of Make Indo Asian/L&T/C&S]

Material and Labour for applying one coat of aluminium paint on old painted surfaces of steel tubular swaged poles, type 410 SP-31 (9.00 Metres Long) including cross arms, bracings, clamps etc. up to 1.5 M above PCC base and marking alternate strip horizontally of width 15 cm with one coat of synthetic enamel paint black & yellow colour above PCC base up to 1.5M height and numbering of poles with letters and figures of height 75 mm at a height 2.60 metre from ground level and including preparation of surfaces complete all as specified and directed. NOTE: The contractor shall ensure proper shutdown before engaging the labours on the pole and shall obtain shutdown from Power House of MES on each day/occasion.

Disconnecting all necessary connections,taking down carefully outdoor unit of existing split type AC 1.5/2.00 TR capacity,cleaning throughly the parts,replacing defective parts, re-fixing in position including testing for satisfactory working conditions and commissioning,complete all as specified and directed. Note : Spares will be measured and paid separately.

Servicing/Cleaning of existing Split Type Air Conditioner 1.5/2.00 TR capacity by opening the indoor & outdoor units, cleaning of filters, removing of dust, checking of all parts etc. complete all as specified and directed. Note :- Spares will be measured and paid seprately under relevant items of this BOQ.

Taking down carefully fan motor from outdoor unit of existing split type AC 1.5/2.0 TR capacity, dismantaling of parts,removing burnt out windings including insulating materials, cleaning throughly internally and externally, rewinding motor with super enamelled copper wires of existing size/gauge including provision of all insulating materials and varnishing,lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling,including testing and commissioning,complete all as specified and directed.

Supply Only,condenser coil assembly complete suitable for 1.5/2 TR split type air conditioner as per OEM's specifications,complete all as specified and directed. [OEM:Carrier/LG/Samsung/Godrej/Bluestar/Voltas/Hitachi/Amtrex].

Supply Only,evaporator coil assembly complete suitable for 1.5/2 TR split type air conditioner as per OEM's specifications,complete all as specified and directed. [OEM:Carrier/LG/Samsung/Godrej/Bluestar/Voltas/Hitachi/Amtrex].

Supply,istallation,testing and commissioning of sealed compressor,reciprocating type,including charging of refrigerant gas, leak testing etc.,suitable for outdoor unit of split type Air Conditioner of 1.5 TR capapicy as per OEM's specifications including flushing inter connection pipes,condenser and cooling coil,complete removal of dust,dirt,bugs,grease,oil etc.,brazing the lekages if any in connection pipe,condenser,cooling coil, pressure testing,checking for leaks, dehydrating and vacuumizing to the standard as per OEM's reccommendations and including taking down carefully existing unserviceable compressor, complete all as specified and directed. [OEM:Carrier/LG/Samsung/Godrej/Bluestar/Voltas/Hitachi/Amtrex].

Supply Only, running capacitor, 45 Mfd,440V AC, 50 Hz conforming to IS: 2993,suitable for split type AC,as per OEM's specifications.

Supply Only, fan & blower motor capacitor 6 Mfd 440V AC 50 Hz for outdoor unit of Split type AC as per OEM's specifications. [OEM:Carrier/LG/Samsung/Godrej/Bluestar/Voltas/ Hitachi/Amtrex]

Supply Only Air filter suitable for split /window type AC,1.5 TR capacity as per OEM's specifications. [OEM:Carrier/LG/Samsung/Godrej/Bluestar/Voltas/Hitachi/Amtrex].

Supply Only, Start Relay for compressor of Window/Split type AC of 1.5/2.0 TR capapicy as per OEM's specifications.

Supply Only,thermostat assembly suitable for 1.5 TR/ 2 TR capacity split type AC as per OEM's specifications. [OEM:-Carrier/Voltas/Godrej/Amtrax/LG.]

Supply Only,fan & blower motor of out door unit of 1.5 TR/ 2 TR capacity split type AC as per OEM's specifications. [OEM:-Carrier/Voltas/Godrej/Amtrax/LG.]

Supply and Fix in repair,copper capillary tube 5/8" complete with insulation as per OEM's specifications for interconnection of indoor and outdoor units of split type ACs.

Supply and Fix in repair,copper capillary tube 3/8" complete with insulation as per OEM's specifications for interconnection of indoor and outdoor units of split type ACs.

Supply and Filling in refrigerant R 22 suitable for split/window type AC,all as per OEM's specifications,complete all as specified.

Comprehensive maintenance for a period of twelve months for DG sets of capacity 40KVA to 62.5 KVA installed at various location by cleaning, Oiling,Greasing, topping, calibration, repairs to diesel engine and including replacement of spares parts like clamps, V- Belt of any size,pipe with fittings, check the level of coolant in radiator, repairs to leakage in radiator etc. Gaskets & Oil seals, servicing of the Water Pump, calibration of fuel injection pump,repairs of Self Starter, Alternator, Auto Voltage Regulator, Battery maintenance by topping up of electrolite solution, rectification of engine oil leakage and topping up of engine oil, replacement of unserviceable oil level tube provided on the fuel tank for checking of oil level (The same is to be calibrated and level marked on the tank), repair of wiring of control panel of DG set by replacement with suiatable size of copper wire including repair/replacement off toggle switch etc & connected accessories through Authorised Original Equipment Manufacturer's Service Centre Engineers or through OEM Certified Agencies as approved by GE, complete all as specified and as directed. (OEM: Cummins/Greaves/Kirloskar)

NOTES:- (Applicable for BOQ Serial Item No. 190 here in before) (i) The Contractor shall provide the following comprehensive services arising out of wear and tear of the normal running of DG Sets (ii) Preventive and Corrective Maintenance : The authorised Service Engineer of OEM or OEM Certified agencies shall visit the site once in four months i.e. quarterly for carrying out preventive and corrective maintenance on all the units installed at site. This includes maintenance of all mechanical, electrical and electronic parts/sub-assemblies. The preventive maintenance report will be as per the Original Equipment Manufacturer's instructions and as specified in Particular Specification. The Contractor may claim payment on monthly basis. In that case the payment shall be made with pro-rata basis on quoted rates. (iii) Breakdown Maintenance : The Authorised Service Engineer of OEM or OEM Certified Agencies will carry out all breakdown maintenance after receiving information (written or oral) from GE (AF) Tezpur officials or their representatives, The OEM's authorised service representative or OEM certified agencies will carry out the required repairs of the units and appraise GE, Engineer-in-Charge and JE the status of the break down repair at site. No payment shall be made on account of any breakdown service during comprehensive maintenence period. (iv) Calibration of fuel injection system,servicing of injector nozzles,repair of radiator,overhauling of self starter,replacement of engine wiring system and top overhauling of engine,the scope of which are already included in this BOQ will be excluded from the scope of work under these items. (v) Spares required for replacement will be measured and paid seperately under respective items of this BOQ.

Supply Only the following spares for 62.5 KVA DG Sets as per OEM's specifications,complete all as specified. [OEM:Kirloskar: MES No.-NYA Location- DM RANGE].

(a) SPIN ON FILTER, Part No.- 06.436.01.0.00

(b) FUEL FILTER KIT, Part No.- 48.999.20.0.00

(c) PRIMARY FILTER ELEMENT, Part No.- 06.757.03.0.00

(d) SECONDARY ELEMENT, Part No.- 06.757.04.0.00

(e) CONTROL UNIT, Part No.- 02.999.91.0.SP

(f) ENGINE WIRING HARNESS, Part No.- 4H.905.20.0.00

(g) COMPLETE WIRING

(h) STOP SOLENOID, Part No.- 4H.150.30.0.00

(j) AVR, Part No.- 2H.811.32.0.00

(k) DIODE ASSEMBLY

(l) DIODE PLATE

(m) GOVERNOR CARD

(n) FUEL PIPE, Part No.- 4H.031.04.0.00

(o) FUEL PIPE, Part No.- 4H.031.05.0.00

(p) Hose Pipe

Supply Only the following spares for 40 KVA DG Sets as per OEM's specifications,complete all as specified. [OEM Cummins : MES No.-NYA Location- DM RANGE].

(a) Element Oil Filter, Part No.- 01220962

(b) Element Fuel Filter, Part No.- 01492967

(c) Element Air Cleaner, Part No.- 3814695

(d) Element Air Cleaner, Part No.- 3814696

(e) Panel Control, Part No.- A054G527

(f) Battery Charger 12V, 10 A, Part No.- AX1014236

Supply Only the following spares for 40 KVA DG Sets as per OEM's specifications,complete all as specified. [OEM Crompton Greaves : MES No.-NYA Location- DM RANGE].

(a) Lub Oil Filter, Part No.- 605411880008

(b) Filter Element with O Ring, Part No.- 001200240911.

(c) Filter insrt with O ring, Part No.- 001200240912.

(d) Air filter element, Part No.- P21109230031.

(e) Air Pre filter element, Part No.- P21109230032.

(f) Relay Card, Part No.- 141100195217.

(g) Governor, Part No.- 106902090056.

(h) Mag pick up, Part No.- 105652190001.

Calibrating fuel injector system to simulate closely the function of fuel injectors in the fuel injection system of diesel (compression-ignition) engine of 62.5 KVA capacity DG Set in order to comply with the higher injection pressures,including replacement of minor spares,repair and servicing of injector nozzles,complete all as specified and directed.

Supply Only,engine oil, viscosity Grade 20W-40,all as specified. (Make: Castrol/Bosch/Servo/Gulf) Note:- Engine Oil shall be supplied in sealed HDPE containers of 5 Litres/20 Litres.

Supply Only,glycol based antifreeze radiator coolant,all as specified. (Make: Castrol/Bosch/Valvoline) Note:- Coolant shall be supplied in sealed HDPE containers of 1 Litres/2 Litres/5 Litres.

Supply Only distilled water,all as specified. . Note:- Distilled Water shall be supplied in sealed PET bottles of 1 Litres/2 Litres.

Taking down carefully,radiator and water pump assembly from engine of DG Set of Capacity 40/62.5 KVA for repairing, brazing in leaking points of circulatory pipe line,upper & lower tanks of the radiator assembly if any,descaling and cleaning throughly tanks & circulatory pipeline,cleaning of fins of radiator assembly and water pump internally,including replacement of defective spares as required and including reinstallation of the radiator and water pump assembly in original position including testing and commissioning,complete all as specified and directed.

Overhauling of Self Starter 12 Volts of DG Set of capacity 40-160 KVA by opening up,cleaning of parts, lubrication and replacement of defective parts including re-assembling all as required for smooth functioning of self starter,complete all as specified and directed. Notes:- (i) Cost of minor spares such nuts,bolts,screws,washers, insulation sleeves, lugs,lubricants etc. required for maintenance shall be deemed to be included in the unit rate quoted. (ii) Spares required to be replaced shall be measured and paid separately under relevant items of this BOQ. (iii) Spares replaced shall be guaranteed for two years. (iv) Self starter shall be tested in presence of Engineer in Charge and the cost of testing shall be deemed to be included in the quoted rate.

Supply Only the following spares suitable for Self Starter 12 Volts of DG Set of capacity 40-160 KVA as per OEM's specifications, all as specified. [Make: LUCAS/TVS/VALEO]

(a) Clutch assembly

(b) Bendex pinion

(c) Solenoid switch

(d) Carbon Brush

(e) Armature Field Coil

(f) Bush

(g) Armature assembly

Supply and Fix in repairs,cam operated rotary isolator switch,90º operation complete rotation,3 Pole ON - OFF,63 Amps,complete all as specified and directed. [Cat No.61197 of Make “L&T” or equivalent Model of Make HPL/ AE]

Supply and Fix in repairs,LED Indicator 16 mm with power consumption < 0.6W, LVGP & surge protection, 64/110 Volts AC/DC / 240 Volts AC,colour Red/ Yellow/Blue, complete all as specified and directed. [Cat No. SIL of Make “L&T” or equivalent Model of Make HPL/ AE]

Supply and Fix in repairs, maintenance free lead acid battery,12 Volts,capacity 100 Ah,suitable for DG Set including provision of brass terminal clamps for connection,complete all as specified and directed. [Model : Xpress (XP1000) of Make'Exide'or equivalent Model of Make 'Amron'/'Amco']

Supply and Fix in repair,switched mode power supply (SMPS) based design battery charger,12 Volts,10 Amps,charging capacity for 7 AH to 220 AH lead acid battery,with protection against reverse polarity of battery and automatic over current limit & intelligent thermal management,digital display for charging Amp and DC Volt with over voltage, under voltage and current protection and easy battery connection with clip leads,suitable for AMF Panels of DG Sets of capacity 40-160KVA all as per OEM's reccommendations, complete all as specified and directed.

Supply and Fix in repair,450 mm long,PVC insulated,unsheathed,heavy duty DC cables with multi stranded copper conductor,of Cross sectional area 25 Sq. mm,single core with copper lugs fitted on both ends suitable for connections of lead acid battery,12 Volts,complete all as specified and directed.

Taking down carefully existing door shutters not exceeding 1 Sq M each from aucoustic enclosures of DG Sets,resecuring or easing and adjusting,including replacement of 02 (Two) Nos of defective mild steel hinges as per OEM's specification,complete all as specified and directed.

Dismantling of ACSR or AAC conductors, service feeder or distributor span complete all as directed.

Dismantling insulator any type, any size complete all as directed.

Dismantling cross arms of M S channels or angle sections etc complete all as directed.

Dismantling stay assembly complete all as directed.

Materials and Labour for drawing aluminium conductor, steel reinforced of any description including fixing of copper binding wire or aluminium tapes and including jointing, provision of jumpers etc complete all as specified and directed.

Supply and Fix, pin type, porcelain, vitreous, white, brown or green insulator including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, 100 mm height, 65 mm dia. for 1100 volts grade, complete all as specified and directed.

Supply and Fix, shackle type, Porcelain vitreous, white, brown or green insulator including galvanized mild steel strap 31 mm x 5 mm, washers, insulator bolts 14 mm dia, washers and nut, 100 mm height, 115 mm dia for 1100 volts grade complete all as specified and directed.

Materials and Labour for stay Assembly complete with accessories as shown in electrical plate No 1 of SSR Part I (2009) with dia. of stay rod 16 mm, complete all as specified and directed. NOTE:- Loop type Insulator, Stay Wire, Excavation and Concrete will be measured and paid separately under respective items of this BOQ.

Materials and Labour for cross arms, bracings, supports clamps and back plates fabricated from structural steel section including nuts, bolts, washers,welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of Aluminium paint over a coat of red-oxide, zinc chrome primer complete all as specified and directed.

Supply and Fix, LT line polyproplene composite phase separator, moulded or bolted type, 2-Lines, 25 mm wide, 12 mm thick, dry power frequency withstand voltage upto 23 KV (rms) , wet power frequency withstand voltage upto 10 KV (rms), tensile strength 500 Kgs (min), complete all as specified and directed.

Cutting of tree branch of girth exc. 20 cm but n.exc. 30 cm for clearing obstruction upto 3.00 metres from LT overhead lines throughout the route including cleaning away grass, vegetation saplings, shrubs, brush wood, around poles and stay assembly and including removing rubbish up to a distance of 50 meters out side the periphery of the area under clearance,complete all as specified and directed. [10 Nos. of Span @ 40.00M/SPAN = 0.40 KM (APPROX) & Nos. of tree branches = 60 Nos. (APPROX)]

Dismantling steel poles/struts, any size complete all as directed.

Supply and erect steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified, type 410 SP-31 (9.00 Metres Long) all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil , complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m but n exc 3.0 m in depth and getting out in soft/loose soil , complete all as specified and directed.

Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Horizontal Boring for passing GI protection pipe up to 100 mm bore (dia), under road / foot path, not exc. 10.00 metre in a single length, complete all as specified and as directed.

Supply and filling in dry sand in cable trenches before and after the cables are laid, as in sand cushioning to cables complete all as specified and directed.

Taking out existing, PVC insulated, PVC sheathed, armoured U/G cables, 1100 Volts grade from trenches/ducts/ poles etc of size 50 Sqmm, 3 ½ core, complete all as directed.

Taking out existing, PVC insulated, PVC sheathed, armoured U/G cables, 1100 Volts grade from trenches/ducts/ poles etc of size 35 Sqmm, 3 ½ core, complete all as directed.

Taking out existing, PVC insulated, PVC sheathed, armoured U/G cables, 1100 Volts grade from trenches/ducts/ poles etc of size 25 Sqmm, 4 core, complete all as directed.

Taking out existing, PVC insulated, PVC sheathed, armoured U/G cables, 1100 Volts grade from trenches/ducts/ poles etc of size 16 Sqmm, 4 core, complete all as directed. (NOTE for Item No.265 to 268 : Earth Work shall be Measured and Paid for separately under relevant Items).

Supply,laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 50 Sq. mm, 3 ½ core, complete all as specified and directed.

Supply,laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 35 Sq. mm, 3 ½ core, complete all as specified and directed.

Supply,laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 25 Sq. mm, 4 core, complete all as specified and directed.

Supply,laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 16 Sq. mm, 4 core, complete all as specified and directed.

Re-laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 50 Sq. mm, 3 ½ core, complete all as specified and directed.

Re-laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 35 Sq. mm, 3 ½ core, complete all as specified and directed.

Re-laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 25 Sq. mm, 4 core, complete all as specified and directed.

Re-laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 16 Sq. mm, 4 core, complete all as specified and directed. NOTE : FOR ITEM NO. 273 to 276 : Serviceable UG cable obtained from Serial Item No 265 to 268 to be reused.

Supply and laying sub class ‘B’, bricks, in cable trenches, as cable protection complete all as specified and directed.

Re-laying old serviceable bricks, in cable trenches, as cable protection complete all as specified and directed. Note:-Old Serviceable bricks obtained from taking out vide BOQ/Schedule-A Serial Item No. 265 to 268 here in before shall be re-used.

Cutting chase for pass through cable protection pipe ,etc.in existing plain cement concrete pavement/ hardstanding/aprons etc. and making good, cutting in plain cement concrete (1:3:6) Type C1(using 20 mm graded aggregate),exceeding 20 cm but not exc 50 cm girth, complete all as specified and directed.

Taking down existing, galvanized steel tubing, 32mm/40 mm/50 mm bore, of any grade, in trenches or fixed to poles/Walls etc,including all fittings, complete all as directed.

Supply and Laying galvanized steel tubing, 50 mm bore, light grade, in trenches or fixed to poles/Walls etc, for cable protection, complete all as specified and directed.

Supply and Laying galvanized steel tubing, 40 mm bore, light grade, in trenches or fixed to poles/Walls etc, for cable protection, complete all as specified and directed.

Supply and Laying galvanized steel tubing, 50 mm bore, light grade, in trenches or fixed to poles/Walls etc, for cable protection, complete all as specified and directed.

Materials and Labour for Straight Through Joints, tubular sleeve type, for 1.1 KV Grade, underground cable including jointing kits and accessories complete for making joints, suitable for 3/3 ½ /4 core XLPE armoured, aluminium conductor cable, of size 25 sq. mm to 50 sq. mm, complete all as specified and directed. [Kit No.EPKJ 0130 of Make 'Raychem' or equivalent Model of Make M-Seal/3M]

Supply and Fix in repairs,moulded case circuit breakers (MCCBs), conforming to IEC 60947-2& IEC 60947-2, AC 415V, 4 pole, with current rating 100 Amps and 25 KA breaking capacity Icu at 415V, AC, 50Hz, with adjustable Over Load setting: 0.8 - 1.0 x In and adjustable Short Circuit setting: 6-10 x In, complete all as specified and directed. [Cat No. CM91712OOKOOG of Make “L&T” or equivalent Model of Make Siemens/ Legrand / ABB.]

Supply and Fix in repairs,moulded case circuit breakers (MCCBs), conforming to IEC 60947-2& IEC 60947-2, AC 415V, 3 pole, with current rating 100 Amps and 25 KA breaking capacity Icu at 415V, AC, 50Hz, with adjustable Over Load setting: 0.8 - 1.0 x In and adjustable Short Circuit setting: 6-10 x In, complete all as specified and directed. [Cat No. CM91612OOKOOG of Make “L&T” or equivalent Model of Make Siemens/ Legrand / ABB.]

Supply and Fix in repairs,moulded case circuit breakers (MCCBs), conforming to IEC 60947-2& IEC 60947-2, AC 415V, 4 pole, with current rating 63 Amps and 18 KA breaking capacity Icu at 415V, AC, 50Hz, with adjustable Over Load setting: 0.8 - 1.0 x In, complete all as specified and directed. [Cat No. CM90518OOHO of Make “L&T” or equivalent Model of Make Siemens/ Legrand / ABB.]

Material and Labour for applying one coat of aluminium paint on old painted surfaces of steel tubular swaged poles, Type 410 SP-22 (8.50 Metres Long) including cross arms, bracings, clamps etc. up to 1.5 M above PCC base and marking alternate strip horizontally of width 15 cm with one coat of synthetic enamel paint black & yellow colour above PCC base up to 1.5M height and numbering of poles with letters and figures of height 75 mm at a height 2.60 metre from ground level and including preparation of surfaces complete all as specified and directed. NOTE: The contractor shall ensure proper shutdown before engaging the labours on the pole and shall obtain shutdown from Power House of MES on each day/occasion.

Materials and Labour for plain cement concrete (1:3:6) Type C-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth lead strip 32 mm x 6 mm by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced 8 mm dia TMT bars @ 150 center to center both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR Part –I .

Taking up or down, steel tubing 25 mm bore, and connection including cleaning for re-fixing, complete all as directed.

Taking up or down, steel tubing 40 mm bore, and connection including cleaning for re-fixing, complete all as directed.

Taking up or down, steel tubing 50 mm bore, and connection including cleaning for re-fixing, complete all as directed.

Taking up or down, steel tubing 80 mm bore, and connection including cleaning for re-fixing, complete all as directed.

Materials and Labour for galvanized steel tubing, medium grade,with all fittings, laid in trenches, complete all as specified and directed.

(a) 25 mm bore

(b) 40 mm bore

(c) 50 mm bore

(d) 80 mm bore

Supply and Fix, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 25 mm bore, complete all as specified and directed

Supply and Fix, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 40 mm bore, complete all as specified and directed

Supply and Fix, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 50 mm bore, complete all as specified and directed

Disconnecting electrical connections carefully from the penal board/starter and lifting of submersible pump motor of capacity 5 HP including column pipe with all accessories, from existing bore well ,complete all as specified and directed.

Dismantaling of parts of submersible pump set 5HP capacity,cleaning throughly internally and externally,lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling,complete all as specified and directed. NOTES:- (i) Repairs shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement and rewinding of burnt out windings of motor will be measured and paid separately. (iii)The quoted rate shall be deemed to be included for Transporation of pumping set from site to workshop for repair and back to MES pump house after repair.

(a ) Supply Only head as per OEM's specifications suitable for pump of 5HP capacity submersible pump set.

(b ) Supply Only GM bowl bush as per OEM's specifications suitable for pump of 5HP capacity submersible pump set.

(c) Supply Only CI impeller as per OEM's specifications suitable for pump of 5HP capacity submersible pump set.

(d ) Supply Only impeller bush as per OEM's specifications suitable for pump of 5HP capacity submersible pump set.

(e ) Supply Only discharge case bush as per OEM's specifications suitable for pump of 5HP capacity submersible pump set.

(f ) Supply Only oil seal as per OEM's specifications suitable for pump of 5HP capacity submersible pump set.

(g ) Supply Only shaft sleeve as per OEM's specifications suitable for pump of 5HP capacity submersible pump set.

(h) Supply Only shaft nut as per OEM's specifications suitable for pump of 5HP capacity submersible pump set.

(i ) Supply Only sand guard as per OEM's specifications suitable for pump of 5HP capacity submersible pump set.

Removing burnt out windings with insulating materials,cleaning throughly,rewinding motor of submersible pump set 5HP capacity with Polyester and Polypropylene. Insulated copper wires of existing size including provision of all insulating materials as per OEM's specifications, complete all as specified and directed. NOTES:- (i) Rewinding shall be carried out through authorised technicians of the OEM's as approved by GE. (ii) Spares for replacement and rewinding of burnt out windings of motor will be measured and paid separately.

(a ) Supply Only bearing bush upper as per OEM's specifications suitable for electric motor of 5HP capacity submersible pump set.

(b ) Supply Only bearing bush lower as per OEM's specifications suitable for electric motor of 5HP capacity submersible pump set.

(c) Supply Only balancing ring as per OEM's specifications suitable for electric motor of 5HP capacity submersible pump set.

(d ) Supply Only jointing kit as per OEM's specifications suitable for electric motor of 5HP capacity submersible pump set.

(e ) Supply Only oil seal as per OEM's specifications suitable for electric motor of 5HP capacity submersible pump set.

(f) Supply Only gun metal rotor housing bush as per OEM's specifications suitable for electric motor of 5HP capacity submersible pump set. .

Lowering of the submersible pumping set in existing bore well by chain pulley arrangement including fixing of column pipe of size 150mm bore,including nut, bolts, washers and rubber gasket in replacement and including tightening of submersible cable with pipe and connection of submersible cable from existing panel board,testing and commissioning complete all as specified and directed.

MAT ENTERPRISE

M/s A.Rahim Talukdar

M/S JUBARAJ GOGOI