Extension of Control room with electrification and metal spreading at existing and the proposed yard for Introduction of 110/33 KV ratio at Gandhinagar 110/22 -11 KV Sub-Station.

Amount

Clearing Light jungle and disposing off to a place away from the site as directed by the Engineer in charge including all Labour charges,T&Ps etc., complete.

Dismantling of existing brick masonry wall with cement mortor inside control room including cost of all labour lead lift etc.Completes per standard soecification as directed by the engineer at site.

Dismantling of existing Floor finish by chipping the concrete and roughing the surface including cost of all labour lead lift etc.Completes per standard soecification as directed by the engineer at site.

Dismantling of existing Floor tiles in cement mortar, roughing the surface including cost of all labour lead lift etc.Completes per standard soecification as directed by the engineer at site.

Earth work excavation for foundation in HGS and and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard Specification as directed by the Engineer at site.

Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting as per standard Specification as directed by the Engineer at site.

Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in Medium Rock and Dense Medium Rock not requiring blasting as per standard Specification as directed by the Engineer at site.

Earth work excavation for Foundation in Hard rock by Wedging and Chiseling and trimming to proper shape where blasting is prohibited and stacking for measurements including all leads, lifts etc., as per standard specification and as per instruction of the Engineer at site.

Providing Anti Terminate Treatment over the Plinth Building area in 3 stages ( foundation stage, Flooring stage and Outside area ) including cost of all materials, labour, lead, lift etc., as per standard Specifications and directed by the Engineer incharge complete.

Plain cement concrete in CC 1:3:6, using 20 mm HBG metal, for foundation/Padding Concrete excluding form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard Specification complete.

Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Footings including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Column upto ground level including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Grade beam / plinth beam including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement)

Re-Filling with Excavated Earth in foundation including cost of all Labour, lead, lfit etc., complete.

Supplying and filling of gravel as per Standard specification including the cost of all materials lead lift etc. with consolidation complete.

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Column Basement level to roof levelincluding cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Sill beam including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement)

Brick work in C.M. 1:5 using chamber burnt class II bricks, for Basement & superstructure iincluding, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification.

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Loft including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Lintel including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Sunshade (0.6m wirth 0.08 m at thick at end side 0.05 m thick at free end )including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Roof beam including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Roof Slab 125 mm Thick including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Providing steel reinforcement with MS/RTS rods of reputed approved make for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, Minor T & Ps labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift etc., complete as per Standard Specification

Supplying and laying PCC 1:2:4 using 6mm metal for thickness 80 mm with required slope and laying one course solar reflective ceramic tiles of 305x305 mm x7mm in cement morter 1:3 12 mm tk and pointing with same morter including cost of cement, all materials, labour, curing, all leads,lifts,etc complete

Plastering with CM 1:3, 10 mm thick for Ceiling & Sunshade bottom including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Plastering with CM 1:5, 12 mm thick surface including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Outer colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces including through scrapping, clan removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required.

Colour washing with two coats of inside walls using interior emulsion paint over a primer one coat and two coats of wall putty using wall putty paste of approved quality interior walls smoothening by scrapping with nice sand paper for interior surface as directed by the Engineer at site including cost of all materials such as oil bound distemper, wall putty paste, primer and scaffolding, labour, lead, lift etc., complete

Painting with 2 coats of white Oil bound distember over 1 coat of Cement Primer for Interior ceiling surface including cost of all materials, labour, lead, lift, brush, etc., complete.

Painting 2 coats of Acid Proof Paint over 1 coat of Cement Primer including cost of all materials, labour, lead, lift etc., complete.

Manufacturing and fixing of Anodised Aluminium Glazed door using Outer Frame 101.60 @ 1.608 Kg/m and Door inner frame side and Vertical 53.70 X 44.45 & 1.238 Kg/m and Door Bottom section 83.50 x 44.50 @ 1.67 Kg/m and divider & Top of Door frame 47.62 X 44.65 @ 1.072 Kg/m glazing Clips of 17.30 x 19.00 X 0.60 mm @ 0.083 Kg/m with everite / Pioneer, Floor gear rubber beeding, Hinges, Handle & 5 mm thick CGL make cooling glass including cost of all materials, labour, transport. lead, lift etc., complete.

UPVC windows: Specification:- Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mmx58mm and shutter profile size of 60x78mm profiles are reinforced with GI/1mm 125 GSM and 100% Corrosion free, the profile are multi chambered secctions with wall thick of 2mm. The EPDM rubber (Black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned, Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall 100% packing with screws and silicon packing all round the frames, The ventilator should be got approved from the Executive Engineer before use on work

Solid PVC door shutters with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Aluminium anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour etc.,

Supplying and laying of Non - slippery type Double charged Vetrified tiles size of 600x600x8mm for Control Room etc., of approved quality and colour laid in CM. 1:2 , 12 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing Flush with tiles surface including cost of cement all materials Labour ,curing , leads and lifts etc., complete.

Supplying and laying of Acid Proof Tiles for Battery Room of approved quality and colour laid in CM. 1:2 , 12 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing Flush with tiles surface including cost of cement all materials Labour ,curing , leads and lifts etc., complete.

Supplying and fixing in position best quality and approved make Indian made colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal ) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying & fixing of 40mm dia PVC pipes (10Kg/cm2) with ISI make for water Supply arrangements including cost of Pipe, Bend, Tee, L- Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.

Supplying & fixing of 25mm dia PVC pipes (10Kg/cm2) with ISI make for water Supply arrangements including cost of Pipe, Bend, Tee, L- Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.

Supplying & fixing of 40mm dia GM Gate Valve with ISI make including cost of gate valve, all specials, labour for fixing, lead, lift , ete. Complete.

Supplying & fixing of 25mm dia GM Gate Valve with ISI make including cost of gate valve, all specials, labour for fixing, lead, lift , ete. Complete.

Supplying & Fixing of Galvanised angle size of (50mmx50mmx6mm) fixing at 600mm C/c for Cable duct inside the Control room including cost of angle, Galvanisation, fabrication, labour for fixing transporting charges, lead, lift etc., complete

Supplying and Laying of 110 mm dia. 4 Kg/cm2 PVC pipe for Rain water fall pipe including cost of all materials, labour lead, lift etc., complete.

Supplying and fixing of ISI make 4 way Triple pole and natural MCB Distribution Board with 1 No. 6 to 32 Amps DP IC Switch of 500V, As incoming 6 Nos. 6 to 32 Amps SPMCB out going necessary flush with wall and making good of cancelled portion with earthing as per PWD standard arrangement.

Wiring with 2.50 sq mm PVC unsheathed multistrand copper cable of 650 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and covering with 3mm thick hylum sheet over TW switch box with continuous earth wire connection 14 SWG TC wire and making good the damaged portion of masonry for PVC concealed light point.

Wring with 2.50 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 5 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.

Wring with 2.50 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 15 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.

Supplying and fixing of Slanding Holder with LED 14W Bulb with ISI approved quality including cost of all materials, labour, lead, lift etc, complete.

Supplying and fixing of Twin type Decorative type Led Tube 4' 20W fittings with Copper choke & slim type LED tube and fittings complete with ISI mark, electronic choke and condenser with conduit type suspension from ceiling with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 4’ 20W single LED Tube light and fittings complete with ISI mark, electronic choke and condenser with conduit type suspension from ceiling with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing 1200mm (48") swap AC ceiling fan with 600mm down rod with approved best quality make of standard specification with electronic regulators and switch, including cost of all materials Labour fixing charges etc., complete.

Supplying and fixing of 450 mm AC Sweap AC Exhaust Fan Heavy duty including Providing necessary hole in wall, fixing charges, lead, lift etc., complete.

Supplying and fixing of single box Street light type with Led 30 W light fittings with ISI markwith GI pipe stand pipe for exterior light unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of Earthing with Electrode of 2 mtr. class B GI Pipe less than 32 mm dia. complete.

Fabrication and Erections of Name Board of size 1.80 m x 0.90 m using 18 guage M.S.Sheet with outer frame of 50x50x6mm angle and stiffenar at the rear side of 50x6mm M.S flate supported on M.S. chanel ISMC 100x50, 3 mtr.height from the GL and 1m below GL with struts using ISA 50x50x6mm and painting with two coats of approved colour enamal paint over one coat of primer and lettering on the board as per the direction of Engineers at site including cost of all materials, fabrication erection and Transporting charges, lead, lift, etc., complete.

Supplying and fixing of double side Polished Cudappah Slab 20/30mm thick for Shelves rack including cost of all materials, Labour, lead, lift etc., as per standard Specification complete.

Supplying and fixing of 1000 Liters PVC water tank (white coated) of approved quality with ISI mark including cost of all materials labour for connection , lead, lift etc., complete, as per standard specification.

Labour charges for writing Name Board/Slogans over the plastered surface wall in the control room including cost of paint & all materials, labour, lead, lift, etc. complete, as per standard specification.

Supplying & stick the TNEB Embelem in front of control room entrance door including cost, lead, lift, etc. complete, as per standard specification.

Supply&Fabrication of MS Ladder & Main gate using the Suitable MS angles fixing at including cost of all materials,one coat of primer paint and two coats of enamel painting, Transporting, labour, lead, lift, fixing labour etc., complete.

Drilling of 40mm dia holes in rock and grouting the same with CM 1:2 aafter placing the 25 mm RTS dowel bars etc. Complete including cost of all materials lead lift etc Complete.

Supplying and spreading 20 mm metal 100 mm tk over the stone dust of 100 mm tk including cost of all materials, labour, lead, lift, etc., complete.,

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

Thulasingam

ASAITHAMBI.M

C.PERIYASAMY

MSS CONTRACTORS