8225 WELCOME MAINT / EXT PERIODICAL SERVICES AND CERTAIN BR REPAIRS AT SAIBABA COMPLEX, 4 RMC, No. 1 LINE, CH COMPLEX, LOWER HOSPITAL ROAD, WANOWARI ROAD, GWALIOR LINE, POW ROAD, KT LINE, ALC QTRS, ODL UNDER AGE BR II SOUTH PUNE

Amount

Preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of white wash complete all as specified and directed

Complete removal of existing treatment on wall and applying two coat of white wash on wall complete all as specified and as directed.

Preparation of old decorated surfaces of ceiling by brooming down and scrapping whereever necessary and applying one coat of white wash complete all as specified and directed

Preparation of old decorated surfaces of walls by brooming down and scrapping wherever necessary and applying one coat of Oil Bound distemper white or tinted complete all as specified and directed.

Complete removal of existing treatment on wall and applying two coat of Oil Bound distemper over a coat of alkali resistance primer, white or tinted on wall complete all as specified and as directed

Complete removal of existing treatment of walls by scrapping, cleaning by water jet, soffits/facia of chajja/roof slab etc and applying two coat of Apex Ultima Weather shield paint or tinted over a coat of primer etc complete all as specified and directed. (Note : Contractor has to give 5 Years Guarantee Certificate, if within guarantee period Apex removes / washout, contractor has to repaint with the Apex.)

Preparation of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old painted wooden surfaces exc 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L one coat of oil bound distemper on ceiling incl preperation of old plaster surface complete all as specified and as directed.

M& L for 2 mm thick wall care putty including prepartion of surfaces complete all as specified and as directed.

M&L for preparation of old painted steel surfaces exc 10cm width or girth and applying one coat of aluminium paint complete all as specified and as directed.

Writing letters on PVC coloured sheet of size 450mm x 200mm x 6mm thick, Writing letters / Numerical as directed by Engineer-in-Charge and fixing to Building with screws 4No Each, Any height upto 12m height, size of letter 80 x 125mm complete all as specified and as directed.

All as per Sl item 13.00 above but on Circular plate on 150 mm Dia (Qtr No) complete all as specified and as directed.

M&L for one coat of cement based paint on walls incl preparing old surfaces complete all as specified and as directed.

Preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and as directed.

M&L for complete remoal of existing treatment and applying two coats of cement based paint on walls incl preparing old surfaces complete all as specified and as directed.

Preparing newly plastered surfaces, including chalk whiting preparatory to distempering and applying two coats of oil bound distemper on walls over a coat of alkali resistance primer complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint over a coat of primer all as specified and directed

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling incl cement mortasr bedding (but not backing ) removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed.

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and as directed.

Dismantling battens for tiles shingles etc of any size including tiling fillets etc 15 cm spacing etc complete all as specified and as directed.

Dismantling timber scantling 40Sqcm and over in section in any position (unframed work) etc complete all as specified and as directed.

M & L for IInd class hard wood clean sawn batten at 30 cm center to center sectional area exc 5 and n.exc 15 Sqcm etc complete all as specified and as directed.

M&L for roof tiles Mangalore pattern inter locking at side joints laid dry etc complete all as specified and as directed.

M & L for ridge tile or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM (1:6) etc complete all as specified and as directed.

M&L for second class hard wood clean sawn timber fixed as in scantling complete all as specified and as directed.

All as per Sl. Item No. 28.00 above but fixing only complete all as specified and as directed.

Dismantling of AC sheet corrugated, or semi corrugated in roof covering complete all as specified and as directed.

M & L for 6mm thick non asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and as directed.

S&F AC two piece adjustable plain wing ridge, fixed with L or J type hook complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed.

Dismantling boarding/ceiling of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

Demolition of Brick work, solid block or stone Masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

Taking Down cement plaster incl raking out joints and hacking for keys scrubbing down with water etc complete all as specified and as directed.

Rendering 10mm thick over surfaces of concrete/brick surfaces in CM 1:6 finished event & smooth with sagol finish complete all as specified and as directed.

Rendering 15mm thick in CM (1:4) over surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and as directed. (NOTE : WPC shall be measured and paid seperately)

M&L for 25 mm thk concrete type B0 1:2:4 using 12.50 mm graded agg as in floor leveling course etc. complete all as specified and as directed.

M & L for non skid joint free ceramic coloured (dark shade) tiles or size 300mm x 300mm x 7 to 8mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

M & L for granite 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

S & F Machine cut cuddappa stone 25 to 30 mm thick both side polished bedded & jointed in CM (1 : 3) complete all as specified and as directed.

M & L for glazed colour ceramic tiles of size 300mm x600mm x 7 to 8mm thick in wall laid over and including 10 mm thick CM (1:4) backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles etc complete all as specified and directed.

M & L for Coloured non skid ceramic tiles 600 x 600 x 9 mm in floor etc set & jointed in neat cement slurry and poited in coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM 1:6.complete all as specified and directed

M&L for Vitrified Ceramic tiles 10 mm thick Colour (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Taking down chowkats or frames wooden/steel with shutter (w/o taking off shutters from frames) exc 1.5 Sqm and not exc. 4 Sqm each complete all as specified and as directed.

Taking down chowkats or frames wooden/steel with shutter (w/o taking off shutters from frames) not exc. 1.5 Sqm complete all as specified and as directed.

Removing excavated/building material exc 1.50 km but n exc 5Km and depositing where directed.

Dismantling wrought iron or mild steel iron of any description not otherwise provide for.

Dismantlint of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete in any position /any depth on sunken floor/roof slab un-reinforced complete all as specified and as directed.

M&L for cement concrete type type C2 (1:3:6) (40 mm graded agregate) in surface channel and drains complete all as specified and as directed.

Taking up or down carefully steel tubing and connections including cleaning for refixing of size 15mm bore complete all as specified and as directed.

Taking up or down carefully steel tubing and connections including cleaning for refixing of size 20mm bore complete all as specified and as directed.

Taking up or down carefully steel tubing and connections including cleaning for refixing of size 25mm bore complete all as specified and as directed.

M & L for 15 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed

All as per item No. 58.00 above but fixing only complete all as specified and as directed.

M & L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed.

All as per item No. 60.00 above but fixing only complete all as specified and as directed.

M & L for 25 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed.

Taking down shutters of any description by cutting through welding / chieseling etc. not exc 1.5 sqm each complete all as specified and as directed.

S & F three track sliding window with two or more shutter with 4 mm thick tinted glass, one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section including glass complete all as specified and directed.

Hacking out old broken glass (any thickness, size , quality or description) from metal frames , glazed with putty of fixed with beads as specified and directed.

S&F sheet glass ordinary quality, 3mm thick and glazing with oil putty in square n.exc. 0.50 sqm in each pane complete all as specified and as directed.

S & F figured glass pin head type, 3mm thick and glazing with oil putty in square n.exc. 0.50 Sqcm in each pane complete all as specified and as directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for two coats synthetic enamelled painting over one coat of pink primer on new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and as directed.

S&F Butt hinges 10mm medium weight cold rolled, mild steel complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 200mm length of excluded section and fixed complete all as specified and as directed.

S&F Aluminium handle cast type, anodised 150mm complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 156 of SSR Part-II 2010 Refer item No. 8080 as specified and directed.

S&F aluminium powder coated ventiletor with moveable louvers including 100mm width pinheaded glass strip using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed. (a) Rectangular tube 14005

Demolition & breaking up drain pipes PVC or AC set in CM or solvent 75/100/110 mm dia complete all as specified and as directed.

M & L Water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed. (a) Clean the sunken portion of toilet/Baths/WCs/Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.

(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and pply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.

M&L for PCC 1:5:10 type E2 (using 40 mm graded brick aggregate)lean concrete for filling sunken floor etc. complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded brick aggregate) as in coving rounded, chamfered etc on sunken floor complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

S&F in repairs providing and fixing CP toilet fitting as specified and as directed for the following:-

Brass CP wall mixer Non-telephonic shower arrangement screwed down for iron pipe of bore 15mm of make 'METRO'.

15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle, screwed down, screwed for iron pipes fixed in repairs.

Brass CP toilet paper holder.

Brass CP towel ring.

CP pressure adjustable shower with revolving joint.

Stop valve brass chromium plated, fancy type with long shank and cup (concealed type) fixed to pipe of 15mm bore.

Soap dish, brass chromium plated.

Health forcet CAT No. 573

S&F stainless steel grating 75 to 100 mm dia suitable for nahani trap complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall of following size :-

110mm bore

75mm bore

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore provided with access door complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore provided with access door complete all as specified and as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

M & L for PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity make ISI or equivalent incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc complete all as specified and as directed.

S&F in repairs stainless steel sink 1.00 thick for kitchen or laboratory with plug waste pipe washers including cantilevers cast iron brackets connecting union etc over all size 495mmx420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP etc all as specified and directed.

S&F in repair vitreous china oval type wash hand basin, including providing PVC waste pipe 32mm dia, waste coupling 32mm bore of PTMT and CP long body pillar tap of ovel WHB complete all as specified and as directed.

S&F in repairs 20mm bore ‘D’ type brass CP tubular towel rail 60 cm long between flanges complete all as specified and as directed.

S&F in repairs salt glazed stone ware gully traps, square 150x150 size fixed complete all as specified and as directed.

S&F in repairs CP grating for WHB 32mm dia alongwith waste pipe of PVC complete all as specified and as directed.

Repairs to bibcock/ stopcok/ pillarcock by replacing inside face(spindle) of brass suitable for 15mm dia complete all as specified and as directed.

Dismantling of PVC water tanks exc 500ltr and not exc 1000 ltr capacity removing to store and all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed.

GRACE CONSTRUCTIONS