Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹41.2 LAccepted-AOC | 1 | Accepted-AOC Being lowest | |
| 2 | 2₹44.5 L+₹1.6 L (3.74%)Rejected-Finance 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹44.9 L+₹2.0 L (4.76%)Rejected-Finance | 3 | Rejected-Finance Not being lowest | |
| 4 | 4₹49.4 L+₹6.5 L (15.2%)Rejected-Finance | 4 | Rejected-Finance Not being lowest | |
| 5 | 5₹49.8 L+₹7.0 L (16.2%)Rejected-Finance | 5 | Rejected-Finance Not being lowest |
| Sl No | Description | Qty | Unit | Sree Ram Enterprises L9 | ASHISH SHARMA L3 | M/S OMKAR SINGH YADAV L8 | M/s SCHOLASTIC ENTERPRISES L10 | m/s meetu enterprises L1 | CREATIVE CONSTRUCTION L6 | M/S DEVENDRA KUMAR GUPTA L5 | M/s Krishna Construction Company L2 | A K ENGINEERS AND SONS L7 | Lachman Das Govind Ram L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Removing existing water proofing treatment of any description from roof slabs, cleaning the surface using wire brushes etc, roughening the concrete surfaces picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm (Where PCC padding is to be provided) complete all as specified and directed. | 370 | Sqm | 50 ₹18,500 | 12 ₹4,440 | 41 ₹15,170 | 100 ₹37,000 | 20 ₹7,400 | 10 ₹3,700 Lowest | 50 ₹18,500 | 20 ₹7,400 | 20 ₹7,400 | 100 ₹37,000 |
| 2.00 | M & L for preparation of old roof surfaces by brooming and watering, cleaning all dust particles and providing PCC (1:2:4) type B-0, (using 12.5 mm graded crushed stone aggregate) with water proofing compound as per manufacturer instruction as in paddding/ levelling course of average thickness not exceeding 25mm complete all as specified and as directed.
Note : Water proofing compound will be measured and paid separately. | 370 | Sqm | 150 ₹55,500 | 159 ₹58,830 | 170 ₹62,900 | 250 ₹92,500 | 210 ₹77,700 | 150 ₹55,500 | 160 ₹59,200 | 100 ₹37,000 Lowest | 225 ₹83,250 | 150 ₹55,500 |
| 3.00 | M&L for water proofing treatment for roof by applying priming coat of epoxy primer with resin and harder in 1:3 ratio with water dilution as per manufacturer instructions, applying two coats of fiber Reinforced Elastomeric Liquid fiber applied water proofing membrane formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fibers liquid applied membrane with consumption of 0.93sqm/ltr (each coat). Second coat should be applied once 1st coat becomes dry completely all as specified and directed. Ponding test of the roof surface will be done for 72 hours before and after the roof treatment process to identify the leakage and seepage from the roof surface complete all as specified and directed. Cost of ponding test deemed to inclusive of rates quoted by contractor.
Note :- (a) The work under item 03 shall be carried out by the authorised applicator of Manufacturer by using modern techniques. The contractor shall also furnish warrantly of quality, finish work and effectiveness of waterproofing treatment under this item for a period of not less than 7 years from the date of completion along with manufacturer warrantly of material for the same period.
(b) From the taking down, preparation of the surface, Eng-in-Charge shall approve each and every stage before applying finishing coats. | 370 | Sqm | 400 ₹1,48,000 | 500 ₹1,85,000 | 540 ₹1,99,800 | 320 ₹1,18,400 | 510 ₹1,88,700 | 750 ₹2,77,500 | 490 ₹1,81,300 | 450 ₹1,66,500 | 500 ₹1,85,000 | 300 ₹1,11,000 Lowest |
| 4.00 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. | 35 | Each | 100 ₹3,500 | 12 ₹420 Lowest | 30 ₹1,050 | 420 ₹14,700 | 30 ₹1,050 | 150 ₹5,250 | 50 ₹1,750 | 80 ₹2,800 | 50 ₹1,750 | 100 ₹3,500 |
| 5.00 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed. | 33 | Each | 200 ₹6,600 | 12 ₹396 Lowest | 35 ₹1,155 | 600 ₹19,800 | 45 ₹1,485 | 200 ₹6,600 | 75 ₹2,475 | 100 ₹3,300 | 60 ₹1,980 | 125 ₹4,125 |
| 6.00 | S & F for powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. | 350 | kg | 525 ₹1,83,750 | 450 ₹1,57,500 Lowest | 550 ₹1,92,500 | 1,700 ₹5,95,000 | 500 ₹1,75,000 | 500 ₹1,75,000 | 510 ₹1,78,500 | 500 ₹1,75,000 | 500 ₹1,75,000 | 600 ₹2,10,000 |
| 7.00 | S & F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and directed. (Note: Sheet glass and veneered board will measured and paid separatly) | 70 | Sqm | 3,500 ₹2,45,000 | 4,500 ₹3,15,000 | 3,200 ₹2,24,000 | 1,600 ₹1,12,000 Lowest | 3,300 ₹2,31,000 | 3,800 ₹2,66,000 | 5,790 ₹4,05,300 | 3,000 ₹2,10,000 | 4,500 ₹3,15,000 | 4,200 ₹2,94,000 |
| 8.00 | S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 200 mm (02 Nos) complete all as specified and directed. | 40 | Sqm | 3,500 ₹1,40,000 | 4,500 ₹1,80,000 | 3,100 ₹1,24,000 | 1,700 ₹68,000 Lowest | 3,500 ₹1,40,000 | 3,800 ₹1,52,000 | 5,790 ₹2,31,600 | 3,000 ₹1,20,000 | 4,500 ₹1,80,000 | 4,900 ₹1,96,000 |
| 9.00 | S&F 4.00 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area n exc 0.5 sqm in each plane complete all as specified and directed. | 10 | Sqm | 700 ₹7,000 | 590 ₹5,900 | 750 ₹7,500 | 800 ₹8,000 | 600 ₹6,000 | 650 ₹6,500 | 550 ₹5,500 | 500 ₹5,000 Lowest | 800 ₹8,000 | 800 ₹8,000 |
| 10.00 | S&F 5.00 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area exc 0.5 sqm in each plane complete all as specified and directed. | 55 | Sqm | 1,000 ₹55,000 | 700 ₹38,500 | 850 ₹46,750 | 1,200 ₹66,000 | 850 ₹46,750 | 660 ₹36,300 | 625 ₹34,375 Lowest | 700 ₹38,500 | 900 ₹49,500 | 1,000 ₹55,000 |
Tender Value
₹62.9 L
EMD Value
₹1.2 L
Closing Date
30 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Agra
112, Taj road, Agra Cantt
SPL REPAIR TO SINGLE OFFRS ACCN (08 ROOMS) AND OR ACCN (04 ROOM) ALONGWITH WASHROOM BLOCK IN COD OFFRS MESS UNDER GE (WEST) AGRA
2025_MES_711979_1
84376/E8
Open Tender
Civil Works
Item Rate
180 days
Agra
MES contractors enlisted for Class C and above and category a(i) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹1,000
GE West Agra
₹1.2 L
9 Aug 2025
2 Jun 2025
7 Jul 2025
2 Jun 2025
30 Jun 2025
23 Jun 2025
2 Jun 2025 - 9 Jun 2025
Amount
Removing existing water proofing treatment of any description from roof slabs, cleaning the surface using wire brushes etc, roughening the concrete surfaces picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm (Where PCC padding is to be provided) complete all as specified and directed.
M & L for preparation of old roof surfaces by brooming and watering, cleaning all dust particles and providing PCC (1:2:4) type B-0, (using 12.5 mm graded crushed stone aggregate) with water proofing compound as per manufacturer instruction as in paddding/ levelling course of average thickness not exceeding 25mm complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.
S & F for powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S & F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and directed. (Note: Sheet glass and veneered board will measured and paid separatly)
S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 200 mm (02 Nos) complete all as specified and directed.
S&F 4.00 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area n exc 0.5 sqm in each plane complete all as specified and directed.
S&F 5.00 mm thick ordinary quality sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading area exc 0.5 sqm in each plane complete all as specified and directed.
S&F figured sheet glass 3.00mm thick pin headed type and glazing with oil putty complete all as specified and directed.
S & F Stainless steel wire cloth, 0.71 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F Aluminium body, door closer, hydraulically regulated designation No.3,universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
S&F in Mortice locks Brass vertical type size 100mm 4 levers brass chromium plated with keys in duplicate all as specified and directed.
S & F aluminium alloy handles size 150mm fabricated type anodised complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specifed and directed.
S&F butt hinges 125mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised, type B-21 complete all as specified and directed.
S&F Stailess steel butt hinges of 75mm size complete all as specified and directed.
S&F mild steel sliding door bolt, 300 mm plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a min of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F MS framed work such as grill grating etc with ends of bars shouldered or riveted or forged into spikes frame guard bars etc complete confirming to Fe 290 Gde E-165 all as specified and directed.
M&L for 12mm thick veneered partcle board exterior grade faced with decorative veneer on both faces including fixing with rubber gasket for aluminium doors complete all as specified and directed.
S & F factory made Solid PVC door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square tube, as per manufacturers specification & drawing complete all as specified and directed.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 176 of SSR 2020 (Part-II)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall or concrete surfaces complete all as specified and as directed .
M&L non skid joint free coloured tiles (1st quality/ premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.(toilet,bath,kitchen, passage floor)
M&L non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. (bed room and other room floor)
M & L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.11 Sqm but n.exc 0.18 sqm on vertical surfaces such as skirting, dado and rises to steps etc. including 10mm thick cement plaster in CM 1:4 set and set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed.
M&L for light shed vitrified ceramic tiles 10mm thick (square /rectangular), polished area of each tiles not exc 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed
M&L for vitrified ceramic light or any shade tiles 10mm thick (square /rectangular), polished (Ist quality/Premium quality), area of each tiles n' exc 0.36 Sqm in verticle surfaces etc, laid over and including 10 mm thick plaster in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection ( 75 mm thick ) laying in alternate ways finished even and smooth without using extra cement all as specified.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 34 shall be reused after cleaning.
S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed.
S&F in repairs vitreous china urinal half stall type of size 580 x 380 x 350 mm, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.
S&F in repair mirror cabinet PTMT size 350X445 mm Make : Shakti/Prayag.
S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.
S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.
S&F 32 mm dia PVC waste pipe for wash basin /sinks
S&F in repair CP health faucet with 1.5 m connection pipe as in repairs complete all as specified & directed.
S&F in 1mm thick Steel sheet dhukkan (coved / lid) suitable screws for 500/1000ltr PVC tank (For Monkey mirace), design and size approved by GE
S&F in repairs mild steel PVC coated drapery rods, 25mm internal diameter including decoratine type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.
S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed. .
S & F in repair tubular towel rail 60 cm length of stainless steel 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15mm bore, brass chromium plated pillar cock fancy type (foam flow) two ways screwed down for pipe and fixed complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed
S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed
S & F repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as spd and directed.
S&F in repair 150 mm square PTMT grating with openable flap (Min weight 100 gms) complete all as spd and directed
S&F in repair 15 mm bore fancy type cast copper alloy CP Stop valve / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
S&F in repair 15 mm bore CP concealed Stop valves, fancy type cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
S&F in repairs brass CP mixer for mixing of hot & Cold water suitable for Wash basin, screwed down for iron pipe and fixed to 15 mm pipe complete all as specifed and directed.
S&F in repairs brass CP wall mixer for mixing of hot & cold water screwed down for iron pipe and fixed to 15 mm pipe complete all as specifed and directed.
S & F in repairs brass CP shower rose 125mm dia alongwith shower arm complete all as spd and dir.
S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers incl bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed.
S&F in repair Waste coupling of PTMT (half or full threaded) of 100mm bore suitable for Sink complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connection complete all as specified and directed.
S&F 15mm dia bore GI tubing, medium grade, galvanised with all fittings, fixed to walls, ceiling or laid in floors complete all as specified & as directed.
S&F 20mm dia bore GI tubing, medium grade, galvanised with all fittings, fixed to walls, ceiling or laid in floors complete all as specified & as directed.
S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S&F 110 mm bore PVC (SWR) single T with access door of any radius complete all as specified & directed.
S&F in 110 mm bore PVC (SWR) single Y with access door of any radius complete all as specified & directed.
Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge / GE.
M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed.
M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.
M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of chalk whiting over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed.
M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removal of existing treatment with mechanical means complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed.
M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.
Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
S&F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410W(GdeE-250) quality A complete all as specified and directed.
S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed.
Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings, any gauge, thickness, including Nainital or similar pattern roof covering
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified
S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of matching colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified
Dismantling Wrought iron or mild steel work of any description not otherwise provided for
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc
Dismantling wall and ceiling boards ( fibre, pulp, insulation etc or insulation boards/ slabs/ blankets any thickness including cover fillets snap grid hangers or nay other fixing arrangement all as speified and directed.
S&F Anodised aluminium snap grid frame work for false ceiling all as specified and directed
S &F Hangers 4-6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed
S &F Exposed metal frame ceiling with calcium silicate board 8 mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid (Frame work for ceiling shall be measured and paid separately)
S &F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
S &F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
M&L 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.
M&L 75mm thick cement concrete 1:4:8 type D2 (by using 40mm graded stone aggregates) as in path, sub floor and similar works all as specified and directed
M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set & jointed in neat cement slurry and pointed with grey cement & pigment in floors laid over and including 20 mm thick screed bed CM 1:4 or bedding layer with screed bed complete all as specified and directed.
Providing and laying 60mm thick factorymade chamfered edge cement concrete paverblock of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method usingPU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and properembedding/ laying of inter locking paverblocks into the sand bedding layer throughvibratory compaction by using platevibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.
Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc by cement/ colour /plaster to match with the existing location spot complete all as specified & directed.
M&L for concealed point wiring concealed with FRLS PVC insulated unheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated multistranded copper conductor cable of 1.5 sqmm size through and included PVC conduit terminated in 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for fixing of switches, sockets, fan regulators for one light point or one fan point controlled by one switch including making good to dismantled surfaces with existing finishes complete all as specified & directed.
All as per item No.98 here in before one socket out let 5/6 Amps on independent board controlled by one switch but with 2.5 sqmm copper conductor complete all as specified & directed.
All as per item No.98 here in before but one socket out let 5/6 Amps controlled by one switch on the same board with other switches complete all as specified & directed.
All as per item No.98 here in before but 4 sqmm PVC FRLS insulated stranded copper conductor cable and for one socket outlet 3/6 pin, 15/16 Amps controlled by one 1 way switch on indepdendent board complete all as specified and directed. NOTE-For item No 98 to 102 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns / Beams / Ceilings etc shall be in surface steel conduit of suitable size fixed on surface with using PVC rawl plug. (ii) Fittings like switches,sockets,regulators,lamp holders,light fittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of rns of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade). (iv) The rate of all type of conduit, fittings, rawl plugs etc deemed included in items.
Supply and fix modular switch piano flush type, sigle pole, 5/6 Amp one way, 230 volts complete all as specified and directed.
Supply and fix modular switch piano flush type, sigle pole, 15/16 Amp one way, 230 volts complete all as specified and directed.
Supply and fix modular socket outlet, 5/6 Amp, flush type, 5 pin, 230 volts complete all as specified and directed.
Supply and fix modular socket outlet, multi purpose 3 pine 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed.
S&F modular switch, bell push button, single pole, 5/6 Amps, one way, 230 volts complete all as specified and directed.
S&F for ceiling rose surface bakelite 50 x 25 mm size 3 terminals complete all as specified and directed.
Supply and fix lamp holder insulated body with back plate for battern fitting complete all as specified and directed.
Supply and fix rotory steeped type electronic fan regulator mini flush type 100 watt 230 volts complete all as specified and directed.
Supply and fix electrical bell model city ding dong (Ding dong type) AC, 230 volt complete all as specified and directed.
Supply and fixing LED bulb 15 watt, single phase, 230 volts, AC supply suitable for lamp holder complete all as specified and directed.
Supply & fix in replacement, single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps, 240 Volts IK-08 as per IEC 61439-3 complete all as specified and directed.
Supply & fix commissioning and testing of complete power cum starter unit compressing of ON / OFF switches socket 3 pin socket outlet with plug top modular type made out of white polycarbonate, fire retardant, UV stabilized power unit internally pre-wired with suitable size copper conductor cable with overlead protective device (MCB) complete unit fixed in single polycarbonate housing with inlet & outlet cable port suitable for AC & geyser operated at single phase, 240 volts, 50 Hz AC supply of capacity 20 Amps load bearing capacity complete all as specified and directed.
Supply & fix surface / wall mounting LED batten 20 watt luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall / celing with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified and directed.
Supply & Fix outdoor security light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodized and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20 M long bracket made out of 40 mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm flat iron / MS clamps & 12 mm dia bolts, nuts & washer etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified and directed.
Supply & fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply & Fix surface mounting type bulkhead 10 watt LED luminaire ENDURA RUGBY NEO IP 65 environmental friendly altra modern energy saving, decorative oval comprising of high brightness LEDs, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified and directed.
Supply and fixing bed side LED lights fitting 1 x 6W, 220 V with driver, holder including LED tube light warm white in colour with a nominal system output of 100 lum / watt (min) with PF not less than 0.9 including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fix NEW GENERATION POST TOP energy saving envirmental friendly long life 35, watt LED luminaire light fitting, IP 65 protection with reflector cover electronic driver, connector block etc with internally prewired fixed to bracket on gate with fixing accessories and connecting up with & including twin twisted copper flexible wire form ceiling rose to fittings complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with fiber glass coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including fastener mild steel 100 mm long x 10 mm dia with pin and bolts complete for hanging of geyser complete all as specified and directed.
Supply & fix exhaust fans AC single phase 230 / 240 V of size 300 mm sweep with louver including connecting from ceiling rose to fan connector complete all as specified and directed.
Supply and fix PVC body fresh air fan of size 200 mm sweep, with PVC louvers, operated at 230 volts 50 Hz, AC supply, 1350 to 1400 RPM with 3 core flexible copper conductor cable cord of size 0.75 sqmm from fan to ceiling rose complete all as specified and directed.
M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length
M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.
Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 200 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB & MCCB but with enclosue blank plate complete all as specified and directed .
Supply and fix MCCB 4 pole 100 to 125 Amp, Icu 16 Kilo Amp and Ics 100% of Icu with adjustable overload setting 70% to 100% and thermal magnetic release suitable for fixing in VTPN DB complete all as specified and directed.
Supply and fix in replacement MCB DB sheet metal enclosure factory fabricated double door SPN 12 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed.
Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 82 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed.
Supply and fixing MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 40 to 63 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified & directed.
Supply and fixing MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 32 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified & directed.
Supply & fix in replacement MCB SP, 40 Amps, 'C' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.
Supply & fix MCB SP, 6 to 40 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.
M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 complete all as specified and directed.
M&L for electrically disconnecting and taking down existing ceiling/Exhaust fans from any hight or in any position from existing bldg and keeping in safe custody for reuse at site after necessary repaire/ servicing & painting with one coat of synthetic enable paint and re-hanging/ re-fixing in original position but including replacement of three coer flexible copper conductor cable from ceiling rose to fan connector block of soze 0.75 Sqmm and hanging fan clamps, nuts, bolts and rubber reel bush etc & testing for proper functioning complete all as specified and directed
Supply, laying and commissioning & testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose/ soil for taking out/laying CI/GI pipe line and getting out soft/loose soil complete all as specified and as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed.
Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed.
Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable complete all as specified and directed.
M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as specified and directed.
Supply and fixing in replacement of GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed.
M&L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.
M/s Krishna Construction Company (BID ID -3338428)
ASHISH SHARMA (BID ID -3340444)
Lachman Das Govind Ram (BID ID -3341328)
M/S DEVENDRA KUMAR GUPTA (BID ID -3341445)
CREATIVE CONSTRUCTION (BID ID -3338377)
A K ENGINEERS AND SONS (BID ID -3341365)
M/S OMKAR SINGH YADAV (BID ID -3340635)
Sree Ram Enterprises (BID ID -3339408)
M/s SCHOLASTIC ENTERPRISES (BID ID -3341370)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .