RENOVATION OF CERTAIN TOILETS AT TECHNICAL AREA CVRDE AVADI

Amount

Brick work with sub class 'B' brickes in CM 1:6 straight or curved on plan exc 6m radius in plain built inculding demolition of brick work built in cement mortar complete all as specified and directed.

M&L Brick work in half brick thick walls with sub class ‘B’ bricks in CM 1:4 curved on plan exc 6 M mean radius complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for (damaged chajja) complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work in rough finish, flat surface, horizontal or slope not exceeding 200mm thick complete all as specified and directed.

TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

TMT steel bars 5mm dia and over upto and including 10mm dia, as in stirrups, spacers, binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC 1:2:4, type B1 (20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

M&L Granite jet black colour 20mm thick factory polished fixed to RCC slab with neat cement slury including cutting to shape, grinding, polishing, bulnosing etc incliding provision of Screed bed in CM 1:4, 15mm thick complete all as specified and directed by Engineer-in-Charge.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:5:10, type E2 using 40mm graded aggregate as foundation and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:2:4, type B1 using 20mm graded aggregate laid to slope 40 mm thick in floors and sub base to floors complete all as specified and directed by Engineer-in-Charge.

M&L rendering on fair faces of brick work or concrete surface in CM 1:3, 10mm thick mixed with water proofing compound @ 3% by weight of cement in sunken portion complete all as specified and as directed. Note: WPC will be measured and paid separately

M&L Non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 and n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision Screed bed or bedding layers of 15 mm thick in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tilling including cement mortar (but not backing) complete all as specified and as directed by the Engineer-in-Charge.

M&L glazed coloured ceramic tiles in vertical surfaces 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including provision backing coat of 10 mm thick in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge.

S&F vitreous china wash down water closet (pedestal pattern) white including connecting to trap and to flushing pipe anti syphonage pipe etc seat cover complete set in concrete flush pipe to closet including all joints and making good floor and wall complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white including connecting to trap and to flushing pipe anti syphonage pipe etc seat cover complete set in concrete flush pipe to closet including all joints and making good floor and wall complete all as specified and as directed.

M&L vitreous china squatting pan orissa pattern size 580 x 440mm white with integral foot rests, squatting pan including connecting to trap and to flushing pipe anti syphonage pipe etc. Complete including making good to floor including trap set including complete concrete. flush pipe to squatt pattern closet including all joints and making good to the floor complete all as specified and as directed.

S&F PVC valveless flushing cistern, syphonic action type, 10 ltrs and flush pipe syphonic action type, low level, white, with inlet, ball valve, float and handle complete all as specified and as directed

S&F PVC valveless flushing cistern, syphonic action type, 10 ltrs and flush pipe syphonic action type, low level, white, with inlet, ball valve, float and handle including taking down flushing cistern of any model complete all as specified and as directed

S&F stop valves (angle valve) 15 mm dia bore cast copper alloy CP, fancy type screwed down high pressure with butter fly handle complete all as specified and as directed.

S & F for bib tap 15 mm dia bore cast copper with capasten head, chromium plated, screwed down high pressure, with our without lettered, Hot or Cold with long screwed with crutch or butterfly handle, fancy type, complete all as specified and as directed

S&F in repair Pillar taps, 15 mm dia bore, cast copper alloy with capstan heads, chromium platted screwed down high pressure with or without lettered HOT or cold with long screwed snates and fly nuts, complete all as specified and as directed

S&F PVC connections pipe 15mm dia bore with PTMT nuts of length 450mm complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed

M&L vitreous china urinal half stall type complete including providing and fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed

M&L for urinal spreader of PTMT any colour for fixing with 15mm dia bore pipe (minimum wt. 60gms) complete all as specified and as directed

S&F vitreous china urinal partition white size 310 x 200mm complete all as specified and as directed

M&L vitreous china wash hand basin oval shape white / coloured flat back size 550 x 400mm mounted on granite top 20mm thick including waste coupling, plug, procelain stopper brackets , waste pipe etc. complete all as specified and as directed. NOTE: Granite will be measured and paid separately.

S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

M&L for Bathroom mirror of 6mm thick to be fitted on wall of required shape & size included chromium plated fasteners and commerical plywood 3mm thick in backside mirror as required & directed by Engineer-in-charge.

S&F Tubular towel rail 20mm dia D type 60cm long between flanges brass chromium plated complete all as specified and directed.

S & F Galvanized steel water tubing 20mm dia bore, medium grade including provision of all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed complete to walls and ceilings including taking down old GI pipe all as specified and as directed by the Engineer-in-Charge.

S & F Galvanized steel water tubing 15mm dia bore, medium grade including provision of all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed complete to walls and ceilings including taking down old GI pipe all as specified and as directed by the Engineer-in-Charge.

Labour only for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and as directed by the Engineer-in-Charge.

Dismantling 100/110mm bore, PVC, cast iron or reinforced concrete or PVC pipes for rain water, drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC SWR pipe single socketed in any length with rubber ring joints fixed to wall 110mm dia bore complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC SWR pipe single socketed in any length with rubber ring joints fixed to wall 75mm dia bore complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) bends 110 mm dia bore complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) bends 75 mm dia bore complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) vent cowl 110 mm dia bore complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) branch piece, single (single Y) 110 mm dia bore complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) junction single, (Single T) 110 mm dia with access door bore complete all as specified and as directed by the Engineer-in-Charge.

M&L for PVC (SWR) Floor trap 75 mm dia, including 40mm dia HDPE pipe up to the trap of bath room and jointing with solvent with outlet pipes, stainless steel grating etc fixed bore complete all as specified and as directed by the Engineer-in-Charge.

S&F Alumnium powder coated sections made out of hallow/ solid extruded aluminium section (minimum thickness of powder coating 50 micron) for openable windows/ sliding windows /ventilators/ door shutter/ parttition with all types of doors, windows & Ventilators frames with one or more rebates including joining cleats, beads for fixing etc complete all as specified and as directed by Engineer-in-Charge. Note: Glass and wiremesh shall be measured and paid separately.

S&Ffigured glass 6.0 mm thick, not exc 0.5 Sqm each with glazing clip, rubber beading /gasket in squares in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F figured glass 6.0 mm thick exc 0.5 Sqm each with glazing clip, rubber beading /gasket in squares in each pane complete all as specified and as directed by Engineer-in-Charge.

Prelaminated particle board interior grade 9mm thick with decorative choice lamination on both side fixed with screws to timber frame works complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium powder coated louvers movable type in pairs for ventilators including locking arrangement complete all as specified and as directed by Engineer-in-Charge.

S&F Figured glass, pin headed type 4mm thick fixed to aluminium lovers in strips width not exceeding 80mm complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames (PVC door frame with shutter) with shutters of size not exe 1.5 sqm each without taking off shutters from the frame complete all as specified and as directed by Engineer-in-Charge.

M&L solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube S&F in opening as per specification & drawings complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side prelam PVC sheet used instead of plain colou PVC sheet style and rails feathered at edges, PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification complete all as specified and as directed by Engineer-in-Charge.

S&F Butt Hinges, 75 mm long medium weight, Stainless steel complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 150 mm long of extruded section complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium, anodised handles 150 mm long, fabricated type, extruded section complete all as specified and as directed by Engineer-in-Charge.

M&L providing and fixing calcium silicate board 12mm thick in ceiling fixed with screw as per manufacture's instructions and S&F powder coated aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm with S&F 6mm dia GI adjusting rod upto 600mm length fixed to RCC roof slabs by means of ceiling cleats/dash fastners with GI flat 40 x 3mm size 60mm long including dismantling of old flase ceiling of any type complete all as specified directed.

Taking down cement plaster on wall / ceilng surfaces including racking out joints, hacking for key scrubbing down with water etc receive new plaster all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick on fair faces of brick work or concrete ceiling surfaces in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished even and smooth without using extra cement with WPC complete all as specified and directed. Note: WPC will be measured and paid separately.

Supply only integral water proofing compound.

M& L for preparation and applying plaster of paris putty of 2 mm thickness over wall plastered surface finished even and smooth complete all as directed.

M&L for preparation of new decorated surfaces of wall and applying two coat of distemper on walls over a coat of primer complete all as specified and directed by Engineer in charge.

M&L for preparation of newly plasterd surfaces of wall and applying 1 mm thick paris putty to prepare the surface even and smooth and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as directed.

M&L for preparation of new decorated surfaces and applying three coat of white wash on ceiling all as specified and directed by Engineer in charge.

Taking down point wiring of any type (light, fan, socket) complete including fittings and fixtures such as switch, socket, ceiling rose, pendents, regulators, light fittings etc., and making good disturbed surface to match the existing surface complete all as specified and directed.

Material and labour for point wiring complete with ISI marked 1.5 Sqmm PVC insulated FRLSH type unsheathed multistranded single core cable with copper conductor 1100 volt grade drawn through and including PVC conduit concealed accessories ISI marked, on wall, ceiling,RCC, roof slab, beams and columns or fixed in concealed etc. including galvanized modular metal box factory made of suitable size suitable for fixing of and including modular plate as per number of switch modules flush mounted suitable for fixing of and including modular plate cover of required size and 1.5 Sqmm PVC insulated multistranded unsheathed copper earth conduitity conductor and connecting to earth dolly etc. all as specified for and connecting up complete for for for the following (a) One light/ Exhaust fan point controlled by one single pole 5A switch

(b) One point for socket outlet 5 Amps on Independent board

(c) One point for socket outlet 5 Amps on Same board

(d) One point for socket outlet 3/5 pin 15 amp controlled by one switch using 2.5 sqmm copper conductor FRLSH cable with continuous earth wire of 2.5 sqmm copper conductor on independent board.

Modular switch 6 Amps, single pole, oneway,1 module complete all as specified and as directed

Modular switch 16 Amps, single pole,oneway,1 module complete all as specified and as directed

Modular socket outlet multipurpose suitable for 2/3 pin, 6 Amps, complete all as specified and as directed

Modular socket outlet multipurpose suitable for 3/6 pin, 6 and 16 Amps, complete all as specified and as directed

S&F for ceiling rose surface bakelite size 65x50mm three terminal 230V, 50Hz complete all as all as specifed and directed.

Sub main wiring with 2runs of single core 6sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including ISI marked PVC Conduit concealed in walls / roofs / floors etc., including provision of FRLS PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note: Two runs of 6sqmm cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

Taking down the Exahust Fan, sealing cable end, dismantling blades and cleaning fan complete and refixing in same location or different location including provision of cable from ceiling rose to fan complete all as specified and directed.

Sheet metal enclosure for MCB DB SPN 4 way, 240 Volts, single phase, double door with IP-43 protection rated with 200 Amps busbar suitable for MCB as incomer and MCB as outgoing, flushed on wall surface and wrting letters as DB Title/ Incomer/ Outgoing details in paint over DB door complete all as specified and directed.

Sheet metal enclosure for MCB DB TPN 4 way, 240 Volts, single phase, double door with IP-43 protection rated with 200 Amps busbar suitable for MCB as incomer and MCB as outgoing, flushed on wall surface and wrting letters as DB Title/ Incomer/ Outgoing details in paint over DB door complete all as specified and directed.

MCB SP, 6 to 32 Amps, 240 Volts 10 KA breaking capacity C curve with connection complete all as specified and directed.

MCB TPN, 63 Amps 430V 'C' series, 10 KA breaking capacity & connection complete all as specified and directed.

MCB SPN, 40 Amps 230V 'C' series, 10 KA breaking capacity & connection complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and directed make Havells Cat No for battern: REGALBATTENT8UPTO1X22 WDSBSWH and Rod Cat No. TITANIAPLUS2.01213T8SSTL 18WLED865SPC / Wipro Cat No for battern: W10921208 and Rod: LL13-181-65SESL / Crompton Cat No for battern: DMLN1LT8 and Rod: LT8-20-865-2.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed Make Havells Cat No LUMILINEBS10W LED865SPCWH/ WIPRO CAT No. LL20-111-xxx-65 NE3 / Philips Cat No BN 021 LED10S- 6500 PSU GR S1

KRA Constructions

CHARAN ELECTRICALS