CERTAIN MISC PETTY B/R DAY TO DAY REPAIRS WORK TO MD

Amount

Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets , refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately).

Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low leveled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon taps and including small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engneer In Charge. (Note : Replacement of fittings and fixture like Bib tap, Piller Tap etc. if required shall be measured and paid separately.)

Petty repairs to Aluminium joinery works such as Aluminium Door, Alumnium Windows, Aluminium Ventilators and like similar works such as easing of doors, refixing of door, windows, refixing builder hardware such as Aluminium beading to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exc 1.5sqm each and removal from site.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5sqm but n. exc. 4sqm each and removal from site.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement.

S&F for Anodised aluminium powder coated frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S& F for 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed

Supply only 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed

Supply only 200 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed

Supply only 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.

S&F mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed.

Supply only mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed.

S&F 100 mm size extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed.

Supply only 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed

S&F in repair 20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed.

S&F in repairs 20 mm dia anodised aluminium anodised powder coated tubular curtains rod including fixing brackets complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed.

S&F in repairs sheet glass 4.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and directed.

S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repair aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. Make : Dyna and equivalent ISI marked

Dismantling floor, hearth or wall tiling including cement mortar bedding including backing, removing sericeable tiles to store and rubbish off the premises

M&L Glazed ceramic coloured tiles in vertical surface of size 350x250 mmx 7 mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match to match the shade of tiles including 10 mm thick backing coat with CM 1:3 all as specified and directed

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking up or down GI tubing 20 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

S&F in repairs 20 mm (OD)CPVC Pipe SDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenches or fixed to wall/Ceiling complete all as specified and as directed by Engineer-in-Charge

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 ltr but n exc 1000 ltr complete all as specified and directed.

S&F in repairs including disconnecting tanks and S&F1000 Ltrs Rotational moulded polyethylene water storage tanks ISI MARKED (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repairs including disconnecting tanks and S&F 500 Ltrs Rotational moulded polyethylene water storage tanks ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repair Chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F in repair 15mm bore pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob fency type chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule.

S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed.

S&F in repair 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed.

S&F in repair 15 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.

All as per item No 41 here-in-before but 20 mm bore complete all as specified and directed.

All as per item No 41 here-in-before but 25 mm bore complete all as specified and directed..

S&F in repair PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

S&F Grating 150mmx150mm made out of stainless steel complete all as specified and directed.

S&F in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer

S&F in repair PVC EWC anti microbial seat cover hygenic type for padestral pattern including all fitting complete all as specified and directed.

S&F in repair soap dish (Any Type) fixed to wall with brass chromium plated screws complete all as specified and directed.

S&F in repairs chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia.

S&F in repairs for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories & fixed to wall & making good to wall surfaces incl. taking down existing flushing cistern complete.

S&F in repair round moulded PVC water tank lid for specially 500 Ltrs, 1000 Ltrs complete all as specified and directed.

S&F in repairs 32 mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F in repairs Vitreous China Indian type water colset (Squat pattern) white complete as fixed in repair excluding flushing cistern and flush pipe "Orissa" pattern size 580x400 with integral footrest inject connection to trap antisyphonage etc complete incl joint between flushing pipe and socket of WC.

S&F in repairs Vitreous China wash down water closet (EWC) (Pedestal pattern)white complete as fixed in repair excluding flushing cistern and flush pipe and trap white including fixing bolts,WC seat cover of fixed with aluminium or ms chromium plated complete all as specified.

S&F in repairs Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket

S&F in repairs 110mm bore dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed

S&F in repairs 75 mm bore dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed

S&F in repairs 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) junctions single (Single T )equal or unequal complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR) junctions single (Single T) equal or unequal complete all as specified and directed

S&F in repairs sinks with draining board made of stainless steel sheet 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as directed

S&F stainless steel kitchen rack made out of 1.00 mm thick stainless steel sheet of size 900 mm x 600 mm x 250 mm fixed to wall with screws complete all as specified and directed.

S&F in repair of CP Health faucet (hand shower) complete set with 1.5 mtr long pipe and fittings complete all as specified and as directed. Make Cera/JAQUAR/HINDWARE

S&F in repairs CI brackets 450mm long made with IAS 25x3mm suitable for wash hand basin complete all as PTMT complete all as specified and approved

S&F in repairs brass CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete

S&F necessary weldings in Repairs 2.5 cm but n exc 5cm thick of metal to be welded n. exc. 6 mm

Materials and labour for preperation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper complete all as specified & directed.

M & L for preparation of new surfaces plastered or unplastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified & directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.

Material and Labour for rendering 15mm thick in cement mortar 1:4 on brick or cement concrete surfaces & finished even and smooth without using extra cement.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified

Demolition of concrete(reinforced) of any description and in any position not otherwise speifically provided.

Material and Labour for pre cast cover slab using PCC (1:2:4) type B1 and set in cement mortar 1:6 with top surface finished even & fair complete all as specified.

Material and Labour for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally or hoping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips.

M & L for Walling of squared rubble,regular coursed, well bonded,bedded and solidly hearted masonary built in cement mortar 1:6 including hammer dressing all as specified and directed.

All as per above Item No 78 but except material , complete all as specified and directed.

M&L for raised pointing to rubble or polygonal rubble, uncoursed or brought up to coarse with CM 1:3 complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete all as specified and directed.

M&L Cement concrete cast-in situ 1:2:4 type B1 (20 mm graded aggragate) in bands, coping and the like incl weathering throating as directed including use of formwork all as specified and directed.

Dismantling barbed wire fencing of any description complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessarydrilling, bolting or riveting, embeding in concrete etc.,and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed.

S & F for Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately).

Supply and Fixing for zinc coated concertina coil of thickness 2.50 mm of core wire and 0.5 mm thick cold rolled carbon strip (dia approx 610 mm that covering 6 mtr length and 50 spirals) having weight not less than 8.00 Kg per coil all as directed.

Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc. complete all as specified and directed.

Extra for forming fair finished drain or channel up to 55 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc.

M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed.

M&L Preparing new steel surfaces of any description, over 10cm in width/girth, applying two coats of synthethic enamel paint over one coat of red oxide primer.

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm thick each complete in hard/dense soil complete all as specified and directed.

Removing excavated soil to a distance exceed 50m and not exceeding 100m and depositing where directed at level not exceeding 1.50m above the starting point.

M&L for preperation of old decorated wall surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, trading oil and gresy spots and applying one coat of cement based paint on walls complete all as specified.

Cleaning and maintenance of sewage lines and attending day to day complaints of different type of cleaning of sewarage work such as blockage of WHB, WC, Urinal, sinks, bottle trap, floor trap, Nahani traps, "P" or "S" traps of WC, gully trap, vertical CI pipe/PVC pipes of any dia including junction holes of any description, repairing of CI pipe joints (Lead/Cement joints), cleaning of sewage lines, manholes of any size and depth in various areas under 26 ED and GV Camp to maintain sewage system fully functional with and including petty repairs items/ materials i.e screws, washers, plugs, grease etc, cutting of grass, vegetation, shrubs etc, digging out roorts within sewage shafts completely by crow bars, chisel etc and cleaning of rain water pipelines laid in any situation for cleaning and removing blockage from entire system and making it fully functional with manual / pressure cleaning pump and flexible rods and other necessary tools and equipments etc complete all as specified and directed and remvoal of sludge/mud outside MOD land, everyday excluding Sunday by deploying following manpower to the entire satisfaction of Engineer-in-Charge complete all as specified. Note :- Complaint must be attended with in 24 hours of receipt of complaint . (ii) The cost of Transpotation (to and fro) and other necessary T&P, Flexible rods, wirre, Bamboo sticks and other equipment and safty gear shall be arranged/bought by contractor to complete the job and no exter cost shall be paid to the contractor in this effect. (iii) Apprroximate length of sewage line is 5800 Rm. (iv) Apprroximate No. of MH IS 450Nos. (v) Apprroximate No. of Md Accn is 410 No. and OTM 125 No.

Removal of sludge/disposal/sediment of Manhole of any size and any depth including taking out sludge, sewer water, any other materials etc and disposal of the same outside MD land complete all as directed by Engr-in-Charge.

Excavation in trenches for exposing the sewage line and breaking SGSW pipe horizontally on top to help cleaning the sewer line from Manhole to the location where the SGSW pipe is broken and covering the broken portion of SGSW pipe from the top and sealing the opening in CM (1:3) including returning filling and ramming in trenches with excavated earth and disposal off surplus earth to a distance not exceeding. 50 m complete all as directed by Engr-in-charge (irrespective of depth and type of soil).

Demolition of existing SWSG gully trap including PCC kerb etc and supply and fix SWG gully trap square mouthed 100mm size set in PCC (1:3:6) type C1 block measuring 450mm and 100mm thick bed concrete and jointing to drain pipe in CM (1:1) including 100x150mm high PCC kerb in (1:2:4) type B1 with CI perforated grating 150x150mm bituminous coated including disposal of waste/sludge complete all as directed.

Demolition of PCC around floor trap and dismantling existing floor trap and fix new PVC floor/Nahani trap with CP Gratinngs100mm dia in existing pipe and embedding in CM (1:1) including lowering or raising with vertical piece with PVC pipe for jointing trap at true level of floor complete all as directed.

Removing / Bailing of sewage water the septic tank of various capacities and disposal outside MD land including cutting and removing all vegetable growth plants etc in around septic tank and filter bed etc and removing debris outside MD land.

Removal of sludge/disposal/sediment from septic tank of various capacities and disposal the same outside MD land including cutting and removing all vegetable growth plants etc including uprooting of small plants around septic tanks and filter beds and etc and removing debris outside MD land.

Excavation in trenches not exceeding 1.5m wide and n. exc. 1.50 mtr deep and getting out in hard/dense soil.

All as per item No 103 here-in-before but exceeding 1.5m deep and not exceeding 3.00m deep.

Demolition and breaking up drain pipe (salt glazed stone ware) set in Cement Mortar, 150mm bore and getting out from trenches.

Demolition and breaking up drain pipe (salt glazed stone ware) set in Cement Mortar, 200mm bore and getting out from trenches.

Cutting into existing Main Hole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete PCC (1:2:4) type B1, smooth finished and reforming benching as required internal dia of pipe 150mm.

Cutting into existing Main Hole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete PCC (1:2:4) type B1, smooth finished and reforming benching as required internal dia of pipe 225mm.

Material and Labour for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed in CM (1:1) and tested complete all as specified and directed

Material and Labour for 200mm bore salt glazed stone ware drain pipes laid in trenches and jointed in CM (1:1) and tested complete all as specified and directed

Material and Labour for PCC (1:3:6) type C2 for bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as directed.

Material and Labour for PCC (1:3:6) type C2 for bed to drain pipes 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry type C1 1:3:6 (20mm agg) with solid blocks, exc 10 cm in width and setting in mortar 1:6 complete.

Material and Labour for Cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching including finishing the concrete surface even & smooth without using extra cement.

Material and Labour for forming fair finish to channel in manholes using extra cement.

M & L for Removing building materials etc. obtained from demolition (other than spoil) outside MD land upto 10 Km.

G K CONSTRUCTIONS (BID ID -3078098)

AishwaryaConstructions (BID ID -3073795)

PRAGATHI BUILDERS (BID ID -3078965)

M/s SL CONSTRUCTION (BID ID -3069346)