8781/E8 Repair and painting to various steel furniture, polishing of wooden furniture and restringing of charpoys, repairs and convention of GI charpoys into hard top top at NAD Sunabeda, Odisha

Amount

Material & labour for removing of dents and bends Almirah Large steel so as to attain smooth surface and making the item in smooth functioning complete all as specified and as directed.(FD-67(M))

Material & labour for removing of dents and bends Almirah Medium steel so as to attain smooth surface and making the item in smooth functioning complete all as specified and as directed.(FD-67(M))

Material & labour for removing the unserviceable lock for Almirah steel and tightening the loosened part of the locking system and supply and fix new 3 way lock 6 levers with duplicate keys of approved make and quality complete all as specified and as directed.(FD-67(M))

Material and Labour for preparation of old painted surfaces of Almirah large steel and applying one coat of synthetic enamel paint of olive green by spray painting both internally and externally complete all as specified and directed.(FD-67(M))

Material and Labour for preparation of old painted surfaces of Locker steel and applying one coat of synthetic enamel paint of olive green by spray painting both internally and externally complete all as specified and directed.

Material and Labour for preparation of old painted surfaces of Almirah Medium steel and applying one coat of synthetic enamel paint of olive green by spray painting both internally and externally complete all as specified and directed.(FD-67(M))

M&L removing the existing UNSV ply top from Charpoy wooden Newer with ply top and Supply and fix 1950mm x 900mm x 12 mm thick commercial plywood confirming to IS-303 of 1975 with suitable PVC beading alround the plywood with nuts and bolts complete all as required and as shown on drawing or as directed by Engineer-in-Charge.

M&L Removing the existing UNSV ply top from Charpoy GI with ply top and supply and fix 1950mm x 900mm x 12 mm thick commercial plywood confirming to IS-303 of 1975 with suitable PVC beading alround the plywood with nuts and bolts complete all as required and as shown on drawing or as directed by Engineer-in-Charge.

Supply & fix in repairs bottom frame of Chair CB steel with arms size-900mmX535mmX560mm made out of 1st Class hard wood (teak) make holes in weaving cane and fixed with and including 4mm dia nut and bolts 75mm long with washers,drilling to chair frame if required and applying two coats of synthetic enamel paint over a coat of wooden primer including preparation of surface.etc complete all as specified and as directed. (FD-225(M))

All as per Item No.08 above but back frame of Chair CB with arms. (FD-225(M))

Material & labour for removing of dents, bends & welding of TABLE OFFICE OFFICERS STEEL/CLK/TYPIST of size 1200mmx600mm so as to attain smooth surface and making the item in smooth functioning all as specified and as directed.(FD-84(M))

Supply & fix in repairs locking device of TABLE OFFICE OFFICERS STEEL/CLK/TYPIST with duplicate keys of make and quality as approved by GE . (FD-84(M))

Supply & fix with new wooden top of MEDIUM/SMALL 1st class hard wood (teak) size & thickness as per FD No. 220(M), making holes 4mm dia nut and bolt 30mm long drilling to form without back frame of size 153mmx26mm for benches and applying two coats of synthetic enamel paint over a coat of wooden primer including preparation of surface,etc complete all as specified & directed.(FD-220(M))

Taking down unserviceable plastic cane from Chair CB with arms and supply and weaving new cane 4mm wide 0.5mm thick of cream colour half round. Weaving shall be Godrej pattern complete all as specified & directed.

Taking down unserviceable plastic cane from Chair writing and supply and weaving new cane 4mm wide 0.5mm thick of cream colour half round. Weaving shall be Godrej pattern complete all as specified & directed.

Taking down unserviceable plastic cane from Chair dining and supply and weaving new cane 4mm wide 0.5mm thick of cream colour half round. Weaving shall be Godrej pattern complete all as specified & directed.

Taking down unserviceable plastic cane from Chair Easy and supply and weaving new cane 4mm wide 0.5mm thick of cream colour half round. Weaving shall be Godrej pattern complete all as specified & directed.

Removing the unserviceable Rear wooden leg from Chair dining, replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surface as per Drawing No.FD-279, hard rubber rings/PVC toes to be provided at the bottom of legs complete all as directed.

Removing the front wooden leg from Chair dining and replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surface as per Drawing No.FD-279 complete all as directed.

Removing the wooden rail from Chair dining and replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surface as per Drawing No.FD-279 complete all as directed.

Removing the unserviceable Stiffeners wooden of Chair dining and replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surface as per Drawing No.FD-279 complete all as directed.

Removing the unserviceable Rear wooden leg from wooden of Chair easy and replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surface as per Drawing No.FD-279 hard rubber rings/PVC toes to be provided at the bottom of legs complete all as directed.

Removing the unserviceable Stiffeners wooden of Chair easy and replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surface as per Drawing No.FD-279 complete all as directed.

Removing the unserviceable Hand rest wooden of Chair easy and replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surface as per Drawing No.FD-279 complete all as directed.

Removing the front wooden leg from Chair Writing, replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surfaces complete as per Drawing No.FD-250 complete all as directed.

Removing the Rear wooden leg from Chair Writing, replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surfaces complete as per Drawing No.FD-250 complete all as directed.

Removing the Hand rest from Chair Writing, replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surfaces complete as per Drawing No.FD-250 complete all as directed.

Removing the Stiffners of Chair Writing, replacing the same with first class hard wood (teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surfaces complete as per Drawing No.FD-250 complete all as directed.

Taking down unserviceble plastic cane from Chair Varandah & Supply and weaving new plastic cane of 4mm wide,0.5 mm thick cream clour half round, weaving shall be mate pattern complete all as directed.

Prepration of surface and applying two or more coat of french polish for Bed Newar complete all as specified and directed (FD-245)

Prepration of surface and applying two or more coat of french polish for Hard bed complete all as specified and directed (FD-246)

Prepration of surface and applying two or more coat of french polish for chair dining complete all as specified and directed (FD-228)

Prepration of surface and applying two or more coat of french polish for chair writing complete all as specified and directed (FD-250)

Prepration of surface and applying two or more coat of french polish for Table dining 6/8 per complete all as specified and directed (FD-239)

Prepration of surface and applying two or more coat of french polish for Table centre complete all as specified and directed

Prepration of surface and applying two or more coat of french polish for Table writing complete all as specified and directed (FD-89)

Prepration of surface and applying two or more coat of french polish for Table 900x600mm complete all as specified and directed (FD-223)

Prepration of surface and applying two or more coat of french polish for Peg table complete all as specified and directed.

Prepration of surface and applying two or more coat of french polish for Teaboy wooden complete all as specified and directed

Removing and unserviceable wooden long rail from bed Plywood top with MNF Set, replacing the same with first class hard wood(Teak) of same size and applying two or more coat of French polishing to match with the existing surface including prepration of surfaces complete as per Drawing No FD-246.

Supply and new fixing the plywood from Bed plywood top 12 mm thick with fixing of screws approved quality including polishing to match with the existing surface replacing the same with approved quality plywood of same size complete as per Drawing No FD-246.

Supply and fixing of wooden Brackets, fixed on repair to hard bed complete all as specified.

Grinding ,welding of broken chair steel tubular with or with out arms and bringing to its original shape, applying two coats of synthetic enamel painting over a coat of red- oxide primer to match with the existing surfaces over steel surface and applying two or more coats of French polishing on wooden surfaces including preparation of surfaces complete as per Drg No FD-75(M).

Removing the unserviceable / broken shelves of Almirah steel large with shelves, replacing the same with approved quality steel members of same size and applying two coats of synthetic enamel paint over a coat of red-oxide primer to match with existing surfaces including preparation of surfaces complete as per Drg No FD-67.

Removing the unserviceable / broken shelves of Almirah steel medium with shelves, replacing the same with approved quality steel members of same size and applying two coats of synthetic enamel paint over a coat of red-oxide primer to match with existing surfaces including preparation of surfaces complete as per Drg No FD-67.

Removing the unserviceable/broken drawer from table office clerk steel and replacing the same with approved quality steel members of same size and quality duly welding or reveting wherever required and applying two coats of red oxide primer to match with existing surfaces as per Drg FD-84.

Removing the unserviceable/broken Top from Table office clerk steel and replace with new prelaminated particle board confirming to same quality size and fixed teak wood beading as per Drg FD-84.

Removing the unserviceable Top from Table with drawer (900 x600 760 mm) and replacing the same with pre laminated particle Board confirming to same quality and size as per Drawing.

Removing the unserviceable Top from Table Hav/Ors steel and replacing the same with pre laminated particle Board confirming to same quality and size as per Drawing.

Removing the unserviceable Top from Table with/with out drawer (900 x600 mm) and replacing the same with pre laminated particle Board confirming to same quality and size as per Drawing No Fd-224.

MAHIRA ENGINEERING & INFRASTRUCTURE

M/S KHAN ELECTRICAL

Sri Surya Enterprises