Renovation and conversion of MP Office in ward 31

Amount

Picking the Existing damaged Clean removal of cement plaster from walls etc Complete

Plastering with CM1:5 (one cement and five sand) 20mm thick, in all floors including cost and conveyance of all materials to site and labour charges etc , Complete as per Standard Specification 10m2.

Removing the Existing Damaged Flat & Pan Tiles or Manglore Tile over Flat Tiles without roof timbers etc Complete

Dismantling Plain Cement Concrete etc Complete

Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specfication.

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Fabricating supplying and fixing of prepainted galvanized iron sheets with the following specification. The materials should be of PPGItile profile with are dcolour or any other approved design 0.47mm thick 24guage having width 1050mm. The sheet should be G.I.base prepainted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled without damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z120GSM paint thickness the finish should be terra cotta finish like mala bar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet into the requireds size and making ornamental designs as per the site conditionand as directed by the departmental officers.

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5mfrom floor level Using Hilux Board Plain Sheets (10mm thick)

Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' or 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P.brasshinges with 12.5litres PVC Low Level Flushing Tank with all internal fittings etc.,complete complying with standard spoecifications, labor inclusive of fixing low level flushing tank.

Supplying and fixing in position Indian water closet of size 580 x 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part xII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers etc., complete.

Supply and fixing of PVC Solid Doors using 19 gauge 19mm MS Sq,tubes for styles and frames,15mm MS Sq.tubes for to, Lock and bottom rails.The Steel Tubes shall be covered with 5mm thick Solid PVC sheets .Shutter using 5mm thick solid PVC sheets for panel ling shall rigidly fixed in position including furniture and fittings.The over all sizeof styles shall be 50mm x 30mm.The overall size of to prail ,Lock rail and bottom rail shall be 75 mm x 30mm.The overall size of frames shall be 50mm x 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Painting One coats with ready mixed Old Wall Surface Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting two coats with Ready Mixed Enamel Paint over the Old Wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply and delivery of clear water vertical wet type submersible pump suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS 9283 /1995 and as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % ( PAGE 88) (50 Lpm X 60 m )

Labour Charges for the erection of Submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, and erection of panel board consisting of TPICN swtiches starter voltmetre, Ammeter, three point (indicating) lamps capacitor Three phasing preventor and laying and jointing the cable and twin earthing for etc., Complete and testing the pumpset and trail run for 10 days. 3 Phase Panel Board including labour charges

Supply of PVC pipe sand GI pipes and specials. 110mm PVC Pipe

110mm PVC Bend

110mm PVC Elbow

110mm PVC Tee

32mm PVC Pipe

32mm PVC Coupler

32mm PVC Elbow

32mm PVC Tee

PVC Adhesive Solution 100 Gram

32mm UPVC Pipe

32mm G.M Gate valves

32mm Clamp set

150mm bore well cover

Nylon Rope

Supply and delivery of PVC insulated and sheathed 4.00 sq mm copper cable conforming to IS 694/1990 suitable for submersible pump set.

Supply and Installation of Air - Conditioner With Copper Coil 2.00 TR Split Type AC Unit - 5 Star Rated etc Complete

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay etc Complete

Supply and fixing of MS stand for fixing outdoor unit etc Complete

Supply and laying of 5/8” and 3/8” copper pipe (Extra beyond 3 metres supplied with AC unit)

Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes Emblem (15”)

Tamil Brass Letters

English Brass Letters

Supply and Fixing for 3 Seater Granite stone Bench including Conveyance Charges etc Complete

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). etc, complete as per standard specifications. SD 23

Supply and Fixing for LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) HIGHER END etc Complete 30W LED Street Light Fitting with LED

Supply nad Fixing for 4’ 18W Crystal Glass LED Tube Light Fitting including Labour Charges etc Complete

Supply and Fixing for LED INDOOR FITTINGS (LIGHT EMITTING DIODE) HIGHER END 18W LED 3000K Square Type Recessed Fitting with LED etc Complete

Supply and fixing of 1200mm (48")sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps. (SD 110)

Supply and delivery and Iixing of HDPE tank as per lS 12701 / 1996including loading,unloading, transportation and labour charges for fixingof the Gl pipes and specials for pipe connection works including cutting, lhreadino and flxino charoes elc.. Campus Inner - (5000 Litre Capacity)

Students Toilet (1000 Litre Capacity)

Construction of inspection chambers of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing 45X45cm medium weight L.S cover and frame etc.complete.., (Size 60X60)

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) - Upto Basement

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification.

Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Ground Floor

Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Painting two coats of newly plastered wall surface with ready mixed exterior emulsion paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Add GST 18%

K GANESAN (BID ID -1366802)