PETTY REPAIR INCLUDING DAY TO DAY COMPLAINTS IN MARRIED AND SINGLE LIVING OFFRS ACCN, OFFRS INSTITUTE, MES IB, OFFRS MESS, BENJIMAN, SAROJ AND GHUMAN COLONY BLDG IN DOMESTIC AREA AT AIR FORCE STATION UTARLAI

Attending plumber complaints and rectify defects (i.e flushing cistern leakage from down pipe, flush handle, PVC connection, stop valves, Leakage of bib taps, Wall mixer, basin mixer, stop/ angle cock, Pipe line leakages, air lock etc including provision of all type of washers, rubber cone, M-seal spindle for Bib tap/stop cock/mixture with necessary tools & plant and made functional to entire satisfaction of user/Engr-in-charge(Complaint register maintained by supervisor of the contractor ). complete all as specified and directed by Engr - in-charge.

Attending carpenter complaints (i.e tightening of loose door/window/cup board hinges, and refixing of loose sliding bolts/tower bolt/handle, refixing of loose pelmet & curtain rod/brakets, easing of doors/windows/cup boards and repair in same position including providing all type of screws, nails, timber beading, fevicol and necessary small items as per site requirement with necessary tools & plant and made functional to entire satisfaction of user/Engr-in-charge (Complaint register maintained supervisor of by the contractor). Complete as specified and directed by Engr-in-charge. Note for item Nos 1.00 and 2.00: plumber and carpenter complaints shall be attended and rectified within 48 Hours of handing over of complaint slip. However, certain complaints, if declared as urgent by the Engineer in Charge, shall be attended and rectified by the contractor on the same day (within 24 hrs). Violation of this timeline shall attract a penalty of Rs. 250.00/Per complaint per day on the contractor.

M&L for renewing ceramic tiles any type and any size in pathches, area n exc 5 sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles incl dismantling of old tiles. Complete as specified and directed by Engr-in-charge.

Taking down aluminium doors/Window shutters carrying out minor repairs/adjustments including rubber beading, aluminium beads, cleats of required size and refixing in same position incl S&F of neccesary items such as handle, rubber beading, aluminium bead/cleats and similar work. complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-0 using 12.5mm stone aggregate as in PCC work, level course & similar work, benching kerbs of mud stops, rounded or chamfered on edges with necessary form work including demolition of cement concrete of any description and in any position not otherwise specificaqlly . Complete as specified and directed by Engr-in-charge.

M&L for 10mm thick rendering in CM 1:6 on brick/concrete wall surfaces finished even and smooth without using extra cementincluding taking down cement plaster on block or concrete walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc up to 12 mtr height of bldg.Complete as specified and directed by Engr-in-charge.

M&L for preparation on new plaster surface of walls & applying two coat of cement base paint up to 12 mtr height of bldg.Complete as specified and directed by Engr-in-charge.

S&F fixed in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples in door and steel window including removal of exiting U/S wire cloth with screw suitabal for fixing. Complete as specified and directed by Engr-in-charge.

Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips and fixing new ones incl M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane Complete as specified and directed by Engr-in-charge.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. Complete as specified and directed by Engr-in-charge.