REPAIR, MAINT OF CEILING FANS, EXHAUST FANS, WALL MOUNTED FANS , GEYSERS, SOLAR WATER HEATERS AND CONNECTED WKS AND PETTY REPAIRS (INTERNAL ELECTRIFICATION) TO OTM AND MD ACCN OF AREA-I AND II UNDER GE SAUGOR

Amount

Carry out day to day rectification of electrical complaints like no electric supply, light, power, fan and geyser etc and checking of existing electrical item for continuos electric supply and replacing of fuses small peaces of wire upto 1.5 meter etc. complete all as directed by Engr in Charge. Note : (a) Replacement of major items shall be measured and paid under relevant item of this schedule. (b) Repairing upto 04 point with out any other material will be considered as one repair. (c) Electrician and helper so detailed by the contractor will report to MES complaint cell at 0830 hrs morning to receive complaint s(complaint slip provided by contractor) from department and complaint should be rectified within 08 hours .

Supply only modular switch, one way,6 Amp 230, 1 module complete all as specified and directed.

Supply only modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed..

Supply only modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed..

Supply only modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed. .

Supply only modular fan step regulator 120 Watt -2 module complete all as specified and directed..

Supply only modular bell push 6A one module complete all as specified and directed. .

Supply only switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed..

Supply only socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed..

Supply only switch piano type flush, single pole, one way 15 A, 230 V complete all as specified and directed. .

Supply only socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed.

Supply only ceiling rose, surface backlite,three terminal complete all as specified and directed. .

Supply only lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

Supply only in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed..

Supply only bell push flush type one way 5Amp 240 Volt complete all as specified and directed..

Supply only electronic double space rotary 5 speed type regulator 120 watt complete all as specified and directed. .

Supply only in repair/replacement socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination complete all as specified and directed.

Supply only in repair/replacement socket outlet 3 pin 5 amp, combination complete all as specified and directed.

S&F in replacement laminated super hylum sheet of size 8" x 5", any colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed.

All as per Srl item No. 19.00 above but of size 5"x5"

All as per Srl item No. 19.00 above but of size 8"x10".

All as per Srl item No. 19.00 above but of size 8"x12".

All as per Srl item No. 19.00 above but of size 9"x11".

S&F modular metal flush box 1/2 module complete all as specified and directed..

S&F modular metal flush box 3 module complete all as specified and directed.

S&F modular metal flush box 4 module complete all as specified and directed..

S&F modular metal flush box 6 module complete all as specified and directed..

S&F modular White cover plate with frame 1 module complete all as specified and directed..

S&F modular White cover plate with frame 2 module complete all as specified and directed..

S&F modular White cover plate with frame 3 module complete all as specified and directed.

S&F modular White cover plate with frame 4 module complete all as specified and directed..

S&F modular White cover plate with frame 6 module complete all as specified and directed..

S&F modular White cover plate with frame 8 module complete all as specified and directed..

Supply only modular PVC board 3/4/6/8/12 module complete all as specified and directed.

Supply only normal pvc board complete all as specified and directed.

Supply only PVC AC box for MAP ACCN complete all as specified and directed.

S&F in repairs PHOTON ULTRA PL-L 18W with very high efficacy suited for installation in existing lamp holder complete all as specified and directed. Make:- Havells cat part No.- Photonultrapll 419 TL 18 WLED 865 SPC/HPL Cat Part No. HPLLEDPL 18 W(CW)/Halonix cat part No. HLLL-01-18CWE as approved by GE

S&F in replacement of 2 X 2 ultra slip recess mounted luminaire with high brightness cool white/warm white 36/40 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed.

S&F 36 watt LED driver in replacement of 2 X 2 ultra slip recess mounted luminaire with high brightness all as per site requirement complete all as specified and directed.

S&F in replacement PVC insulated and unsheathed single core multi stranded copper conductor 1.5 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete all as specified and directed.

All as per Srl item No. 40.00 above but size 2.5 Sqmm

All as per Srl item No. 40.00 above but size 4.0 Sqmm

All as per Srl item No. 40.00 above but size 6.0 Sqmm

S&F in replacement TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make:- HPL cat Part No. HLPT51820 PCGWW or Bajaj Cat Part No. BCLSB 20 WH or Halonix cat part No. HLB-08-20-CW-IP as approved by GE.

S&F in replacement LED TL fitting 20 watt warm white for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed.

S&F in replacement box type LED optic fitting 10 Watt 2 feet box type complete all as specified and directed. Make:- HPL cat Part No. HLPT515010PC GCW or Bajaj cat part No. BCLSBIWH or Halonix Cat part No. HLB-07-10-CW-IP as approved by GE.

S&F in replacement PVC insulated and unsheathed twin core flexible copper wire 1.5 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete all as specified and directed.

S&F in replacement PVC insulated and unsheathed twin core flexible copper wire 0.75 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete all as specified and directed.

S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

S&F in replacement testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

S&F in replacement testing and commissioning of MCB SPN 240 volt 63 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement testing and commissioning of MCB SP 240 volt 63 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for DB double door TPN 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate

S&F in replacement of TPN 63 Amps 415 V including making electrical coming/outgoing connections with lugs/thimbles complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 200 Amps rated bus bar complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed

S&F in replacement metallic sheet metal enclosure for DB Single door(IP-42/43) When MCBs to be used SPN 2 ways, 240 V with 200Amps rated bus bar complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for DB double door(DPX-125 ) VTPN 4 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 09 complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate

S&F in replacement MCCB 63 Amps 4 pole, 415 V 16 KA complete all as specified and directed..

S&F in replacement MCCB 100 Amps 4 pole, 415 V 16 KA complete all as specified and directed

S&F in replacement including testing and connecting with existing light point with suitable size of flexible wire COMET ROUND Slim surface mounted round al. die cast body with premium diffuser to ensure glare free even distribution of light.12 W LED 6000K complete all as specified and directed. Make:- Havells cat part No. LHEAAVP7ILIW012 or CG cat part No. LCDSPLN-R-18-WW or Orient cat part No. LDSER-12-C as approved by GE.

S&F in replacement including testing and connecting with existing light point with suitable size of flexible wire COMET SQUARE Slim surface mounted round al. die cast body with premium diffuser to ensure glare free even distribution of light.18 W LED 6000K complete all as specified and directed. Make:- Havells cat part No. LHEAAWP71LIW018 or CG Cat part No. LCDSPLN-S-18-WW or Orient cat part No. LDSES-18-C as approved by GE.

S&F in replacement including testing and connecting with existing light point with suitable size of flexible wire OCTANE LED PANEL ROUND slim compact aumium die cast edge lit panel Recess mounted square fixture with opal diffuser and separate electronic driver 12W LED 6500K complete all as specified and directed. Make:- Havells cat part No. LHEBHDP7IZW012 or CG Cat part No. LDRER-12-C as approved by GE.

M&L for concealed sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

M&L for surface conduit sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit /casing-n-caping of suitable size . ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified includin taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

M&L for sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC conduit /Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

M&L for sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 2.5 sqmm (for main current) drawn in & incl PVC conduit/ Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 2.5 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F in replacement LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Havells cat part No. LHEXCGP7UN4W013 or Bajaj cat part No. BIBWP10WLED or CG Cat Part No. LBHE-10-CDL as approved by GE.

S&F in replacement 1100 volts grade heavy duty flat cable PVC insulated stranded aluminium conductor 10 sqmm 2 core over all PVC sheathed in service connection suspended by insulating hangers complete all as specified and directed

S&F or layng in ground 1100 volts grade heavy duty flat cable PVC insulated stranded aluminium conductor 6 sqmm 2 core in garden light ,lawn etc including PVC regid conduit pipe complete all as specified and directed .(Note earthwork in garden or lawn has been included )

S&F in replacement metal clad box enclosure with socket plug top and MCB SP 20 Amps flush mounting enclosure with 2 pin and earth plug socket complete all as specified and directed

S&F in replacement PVC casing caping medium grade of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site complete all as specified and directed

S&F in replacement PVC conduit of size 25/32 mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed.

S&F in replacement PVC conduit of size 20mm dia medium grade including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed.

S&F in replacement SPARKLE PRO ADJUSTABLE 08 watt warm white Recess mounted adjustable LED down/lighter with made of extruded aluminium housing and high power LED as a light source with clear diffuser with eectronic driver 08 Watt complete all as specified and directed. Make:- Havells/Bajaj/CG as approved by GE.

S&F in replacement LED FLEXI STRIP 24 W flexible LED strip uses high brightness SMD LED as the light source for indoor application only including LED driver, with wide viewing angle for good light distribution, easy to install complete all as specified and directed

S&F in replacement EDGEPRO SQUARE 18 watt natural white Slim-Fit low profile downlights are engineered to driver superior light output and uniformity utilising the latest edge-lit LED technoogy of size 210x210mm height 16mm complete all as specified and directed. Make:- Havells/Bajaj/CG as approved by GE.

S&F in replacement EDGEPRO SQUARE 15 watt natural white Slim-Fit low profile downlights are engineered to driver superior light output and uniformity utilising the latest edge-lit LED technoogy of size 180x180mm height 16mm complete all as specified and directed. Make:- Havells/Bajaj/CG as approved by GE.

Taking down carefully existing ceiling fan of any size/sweep/make on any height from it's position, dismantling the fan including preventive maintenance by servicing, greasing, oiling, cleaning external surfaces porperly and replacement of defective spare parts and refixing the same in position including testing complete as directed by the Engr-in-Charge. (Note : Cost of spare parts and flexible connection wire as required will be measured and paid separately under respective items of this Schedule as "Supply only").

Taking down carefully existing exhaust fan of any size/sweep/make on any height from it's position, dismantling the fan including preventive maintenance by servicing, greasing, oiling, cleaning external surfaces porperly and replacement of defective spare parts and refixing the same in position including testing complete as directed by the Engr-in-Charge. (Note : Cost of spare parts and flexible connection wire as required will be measured and paid separately under respective items of this Schedule as "Supply only").

M&L for single coat painting of ceiling fan of any sweep with 1st grade quality synthetic enamel paint by spraying, filling cavites with filler including necessary preparation of surface duly demarking fan Nos complete as specified and directed by Engir-in-Charge.

Supply only Bearing any type and size suitable for the existing ceiling fan complete all as directed. Make - SKF/NBC

Supply only Capacitor 2.5 Mfd paper insulated complete all as directed. Make -CG/EPCOS/Havells

Supply only Capacitor 4 Mfd paper insulated complete all as directed. Make CG/EPCOS/Havells

Supply only GM bush suitable for all as per sample any type of ceiling fan complete all as directed

Supply only GM bush suitable for all as per sample any type of Table/cabin fan complete all as directed.

Supply only MS clamp (suitable for ceiling fan) for existing ceiling fan any type/size complete all as directed.

Supply only PVC canopy for existing ceiling fan suitable for fan upper with screw complete all as directed

Supply only PVC canopy for existing ceiling fan suitable for fan lower with screw complete all as directed

Supply only Ball bearing suitable for exhaust fan of 225 mm sweep complete all as directed. (Make : TATA/SKF/NBC).

Supply only Ball bearing suitable for exhaust fan of 300 mm sweep complete all as directed (Make : TATA/SKF/NBC).

Supply only Ball bearing suitable for exhaust fan of 450 mm sweep complete all as directed. (Make : TATA/SKF/NBC).

M&L in repair to fan shaft by filling metal cutting by machine,grinding polishing complete and making good adequately for any ceiling fan complete all as directed

M & L Writing Nos or figures (Block, Roman, Italic or Indian) such as "MES No …." with synthetic enamel paint (1st grade quality) of tint black/white complete all as specified and directed

S&F rubber insulator reel type suitable for fan hook of any type including taking out old one complete all as directed.

Supply only in replacement PVC flexible 3 core round copper conductor of size 2.5 SQmm from including connection complete all as directed. Make- Polycab/Finolex/Havells.

Supply only in replacement PVC flexible 3 core cable with copper conductor of size 0.75 SQmm from ceiling rose to fan including connection complete all as directed. Make- Polycab/Finolex/Havells.

S&F hanging clamp with nut/bolt and rubber bush suitable for ceiling fan of any make and size all as specified and directed

M&L for down rod of ceiling fan made of GI pipe light grade 15mm dia duly drill and threaded with all fittings and fixed complete to walls/ceiling complete all as directed. Make : Prakesh/Jindal/TATA.

S&F fan blade set (set of three) made out of aluminium suitable for 1200/1400 mm sweep ceiling fan, as per existing size and gauge including balancing of body strecture for free rotation complete all as directed. Make : Usha/crompton/orison/Khaitan or as per existing make

Dismantling ceiling fan (any size/sweep/make) and taking out existing burnt out winding wire of motor and rewinding the same after proper cleaning with super enamelled copper wires as per existing gauge and turn to achieve the desired RPM, cleaning and replacement of bearings, bushes, capacitor etc as required and testing complete on completion for old model ceiling fan having requirement of super enamelled copper winding wire exceeding 500 Gms and not exceeding 1000 Gms for each fan and testing all complete as directed by the Engineer-in-Charge (Note : (a) Replacement of unserviceable parts like capacitor, bearing, bush and flexible wire shall be measured and paid separately. (b) Ceiling fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

Dismantling of exhaust fan and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including cleaning and replacement of defective parts as required for exhaust fan of size 225 mm to 300 mm sweep and testing all complete as directed by the Engineer-in-Charge. (Note :- Replacement of unserviceable parts shall be measured and paid separately. (b) Exhaust fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

Dismantling of exhaust fan and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including cleaning and replacement of defective parts as required for exhaust fan of size 450 mm sweep and testing all complete as directed by the Engineer-in-Charge. (Note :- Replacement of unserviceable parts shall be measured and paid separately.. (b) Exhaust fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

M&L for single coat painting of exhaust fan of any sweep with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking the fan Nos complete as specified and directed. (Note : Writing Fan Nos & letter shall be measured and paid separately under relevent item of this Schedule).

Dismantling of air circulator fan/ wall mounting fan /table fan and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including cleaning and replacement of defective parts as required for air circulator fan/ wall mounting fan /table fan of any size and testing all complete as directed by the Engineer-in-Charge. (Note :- Replacement of unserviceable parts shall be measured and paid separately.. (b) Air circulator fan/ wall mounting fan /table fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

S&F fan blade assembly with necessary MS screws & washers suitable for exhaust fans/Air circullar fan/Wall mount Fan /padestel fan of any descriptions .(Note: Set of three blades shall be measured as one unit and make of assembly shall be as approved by GE.)

Taking down carefully storage type water heater (Geyser) any make and capacity from clamps/ bolts including disconnecting water and electric connection and refixing the same and connecting up after cleaning of geyser and repair in E/M yard or site bringing out inner tank , geyser apparatus (Flange), thermostat, indicator lamp and reassembling complete after carrying out repair and replacement of wornout parts complete. Note : (a)worn out spares/repair of leakage of inner tank shall be measured and paid separately.(b)Petty stores like insulation tape, screws, small piece of cable, etc shall be provided by the Contractor without any extra cost to the department. (c) Defect developed while taking out the geysers, such as leaking of joints, damaging of thread of pipe/geyser and other GI fittings such as elbow, nipple, union, socket, etc shall be rectified/replaced by the contractor at his own cost.

S&F in replacement of geyser inner tank made out of stainless steel sheet, minimum weight 1.20 kg suitable for 25 liter capacity geyser, including ‘O’ ring, coupling set, necessary drilling work, nuts, bolts, washers, etc complete suitable for existing geysers .

S&F in replacement of geyser inner tank made out of stainless steel sheet, minimum weight 1.70 kg suitable for 50 liter capacity geyser, including ‘O’ ring, coupling set, necessary drilling work, nuts, bolts, washers, etc complete suitable for existing geysers .

S&F Geyser flange assembly (existing/type) copper alloy cromium plated suitable for 25/50 Ltr capacity including rubber gasket, clamp & nuts/bolts etc complete all as directed

S&F heating element 1.5 KW 230 Volts suitable for 25/50 Ltr capacity of Geysers as pre site requirement brass metal, CP complete all as directed. . Make : Theeta

S&F heating element 2 KW 230 Volts suitable for 25/50 Ltr capacity of Geysers as per site requirement , brass metal, CP complete all as directed. Make : Theeta

S&F Heating element 3/4 KW 230 Volts suitable for solar water heater as per site requirement complete all as directed . Make : Theeta

S&F Heating element 2 KW 230 Volts suitable for 25 Ltr capacity of Geysers as per site requirement complete all as directed Make : Bajaj CALENTA 25

S&F Heating element 2 KW 230 Volts suitable for 25 Ltr capacity of Geysers as per site requirement complete all as directed. Make : RACOLD

S&F Thermostat suitable for 25/50 Ltrs capacity of Geyser as per site requirement complete all as directed. Make : Make : RACOLD

S&F Thermostat suitable for 25 Ltrs capacity of Geyser as per site requirement complete all as directed. Make : Bajaj CALENTA 25

S&F Thermostat suitable for 25/50 Ltrs capacity of Geyser as per site requirement complete all as directed. Make Theeta

S&F Indicating lamp 230 V , as per site requirement complete all as specified and directed by Engir-in-charge.

S&F Fusible plug for geyser as per site requirement complete all as specified and directed by Engir-in-charge.

S&F Glass wool in 25/50 liter capacity geyser by taking out inner & outer tank and reassembling complete all as specified and directed..

S&F Bib cock long body with flanged brass metal chromium plated size 15 mm suitable for hot water complete all as specified and directed..

M&L for painting of Geyser with two coats of synthetic enameled white paint and writing the MES No for 25 ltr capacity geyser of any make and type complete after removing old paint and preparation of surface

All as per Srl Item No.124 here-in-before but 50 Ltr capacity -ditto-

S&F multi functional safty valve 15 mm , used in geysers as per site requirement complete all as specified and directed by Engir-in-charge. Make : Racold/Bajaj/Havells.

S&F 15 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or unions and fixed all as specified and directed.

S&F GI tubing med grade 15 mm bore with all fitting and fixed complete to walls /ceiling,and taking down of GI Tubing with all fittings all as specified and directed

S&F of GI union socket 15 mm bore, ISI marked complete all as specified and directed.

S&F of GI Tee 15 mm bore, ISI marked complete all as specified and directed.

S&F of GI Elbow 15 mm bore, ISI marked complete all as specified and directed.

S&F of GI Socket 15 mm bore, ISI marked complete all as specified and directed.

S&F of GI Hex nipple 15 mm bore, ISI marked complete all as specified and directed.

S&F PVC connection cold water grade 18” long 15 mm dia with two Nos coupling nut of brass, heavy duty, complete all as specified and directed. Make - Jaguar/Prayag .

S&F PVC connection cold water grade 24” long 15 mm dia with two Nos coupling nut of brass, heavy duty, complete all as specified and directed.Make - Jaguar/Prayag

S&F PVC connection wire woven hot water grade 18” long 15 mm dia with two Nos coupling nut of brass, heavy duty, complete all as specified and directed. Make - Jaguar/Prayag

S&F PVC connection wire woven hot water grade 24” long 15 mm dia with two Nos coupling nut of brass, heavy duty, complete all as specified and directed.

M&L grouting of fastener of suitable size 15 mm dia, 150 mm long by drilling wall and making good to the disturbed surface and matching with existing surface all as specified and directed.

S&F Geyser base plate as per sample all as specified and directed by engir-in- charge.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 250 mm sweep PVC body with lovers complete all as specified and directed. Make -Havells cat part no Ventil Air -DX White/Bajaj MAXIMA DX/Crompton Ventilus10ʺ

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep mettalic body . complete all as specified and directed. Make - Havells TURBOJET/Bajaj MAXX AIR/Crompton EXHD300-6-1.

Repair /services/ checking of solar water heater of any capacity including descaling and arresting any type of leakage complete all as specified and directed by engr in charge.

M& L for screwing existing steel tubing for altration or additions or lengthening screw on pipe to form connectors of any size GI tubing all as specified and directed

M&L for PVC pipe medium grade 25mm/40mm all as specified and directed by engir-in- charge.

S&F in replacement of solar water heater water tank ( 200Ltr) as per sample fixed on solar collector complete all as site requirement and directed

S&F in replacement of Special grade Borocilicate glass tube as per sample suitable for existing 100 LPD and 200 LPD solar water heater complete all as specified and directed.

S&F in replacement of solar collector plate with tough end glass suitable size as per sample fixed on solar collector complete all as site requirement and directed by Engr-in-Charge.

M/S NAVIN & ASSOCIATES

SHRI RAM ELECTRICALS ENTERPRISES

shubhanshu traders