Construction of Pump house cum operator quarter at Banangam and Bakerwal Check , Construction of Chain-Link fencing around structures at Bonangan, construction of chain-link fencing around structures at Bakerwal Check ,construction of sluice chamber

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

All kinds of soil

Ordinary Rock

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 50 mtr and lift upto 1.50 mtr, as directed by Engineer-In- Charge.

All kinds of soil :

Extra for every additional lift of 1.5 m or part there of in excavation/banking excavated or stacked material. All kinds of soil.

Providing and hand packing of quarry stone of required size into the wire crates including cost of stone,

Providing and laying of stone boulders tightly hand picked on horizontal levels

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement of mix 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete :

Dry random rubble masonry with hard stone (Quarry) in foundation and plinth: With bond stone.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge( First class kail wood)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works).

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.( Welded)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms

Edges of slabs and breaks in floors and walls Under 20 cm wide.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete( 50 mm thick with 20mm nominal size stone aggregate.)

12mm Cement plaster finished of mix: 1 : 4( 1 cement : 4 fine sand).

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand).

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.(Long pan pattern white vitreous china W.C Pan of size 580 mm.)

Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 19.10A1 Kitchen sink with drain board

Providing and fixing of PVC waste pipe for sink including PVC waste fitting complete job (40 mm dia)

Providing corrugated G.S sheet roofing inlcuding vertical/curved surface fixed with poilymner coated J/L hooks, bolts and nuts 8 mm dia with bitumen and GI limpet washers or with GI limpet washers filled with white lead complete (upto any pitch in horizontal/vertical of curved surface) excl. the cost of purlins and including cutting to size and shape wherever required 0.50 mm thick.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2.

Providing and fixing of M.S. Eves boarding 300 mm wide and soffit boarding including priming coat of red oxide and painting with two or more coats with symthetic paint of approved brand and manufacture

Supply and fixing of rolling shutter of approved make madfe of required size MS lathes interlocked together througjh their entire length etc complete with 80x0.90 mm M/S Laths with 0.90 mm thick top cover .

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.( I mm thick)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to given shade two or more coats on new work including priming coat of approved brand and manufacture.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in?charge

Providing and fixing of welded wire mesh on sides of DG Shed including all carriage complete.

Providing and filling of sand around PCC block including all carrage complete job.

Provision for plumbing ,sanitary,Grills and Electrification to the Quarter (To be paid as per actual detail)

Providing of wire crates including all carrage complet

Carriage of material from sourse to dumping site at road site by mechanical transport.

Cement & steel for avg. lead of 5 Km

Wire Crates for avg. lead of 5 Km

Sand for avg. lead of 37 Km

20mm Aggregate for avg. lead of 20 Km

40mm Aggregate for avg. lead of 20 Km

40mm Aggregate for avg. lead of 15 Km

Brick Avg lead of 20 Km

Stone solling for avg lead of 15 Km

Carriage of material by manual labour from road site upto actual site of work . for avg. lead of 1000 mtrs

Cement

Steel

Wire Crates

Sand & 20 mm Aggregate

40 mm Aggregate

Stone solling

Carriage of material by manual labour from road site upto actual site of work . for avg. lead of 500 mtrs

Cement

Steel

Sand & 20 mm Aggregate

40 mm Aggregate

Bricks

Stone solling

Mohd Lateef Beigh

Reyaz Ahmad Dar

FAROOQ AHMAD WANI