Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹49.0 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹56.3 L+₹2.0 L (3.67%)Rejected-AOC | L-2 | Rejected-AOC L-2 | |
| 3 | L-3₹56.8 L+₹2.5 L (4.58%)Rejected-AOC BANARPAL KULAD NALCO NAGAR NALCO NAGAR ANGUL ODISHA 759145 | ANUGUL | ODISHA | 759145 | L-3 | Rejected-AOC L-3 | |
| 4 | L-4₹57.3 L+₹3.0 L (5.53%)Rejected-AOC | L-4 | Rejected-AOC L-4 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
3 Jun 2020, 5:00 pmClosed
Mr. Sunaram Hansdah, AGM (Met.)
TnC Department, Smelter Plant, NALCO, Angul, Odisha-759145
Miscellaneous Electrical Maintenance Works related to Improvement Projects in Carbon Area
2020_NALCO_558731_1
OMC-5209
Limited
Electrical Works
Item Rate
365 days
Carbon Area, Smelter Plant, NALCO, Angul
Not applicable
5 documents required · 5 mandatory
₹0
₹40,000
Yes
31 Jul 2020
12 May 2020
5 Jun 2020
13 May 2020
3 Jun 2020
13 May 2020
Amount
Repairing of earth pit after doing masonry works and providing top slab,fixing of painted clamps, short pieces, GI wire, nut bolts etc. wherever required.
Installation of earth pit including supply of all materials (1.8M long and 40mm dia perforate heavy duty GI pipe electrode coke, salt, GI nut bolts etc.) and making of PCC chamber with precast PCC covers as per direction of Engineer- in- charge.
Supply and laying of 50x6mm GI strips inside excavated trench/ on the wall / any other surfaces with supply of all material and as per direction of Engineer-in-charge.
Laying of GI strips (upto 75x8mm) inside excavated trench/ on the wall /any other surfaces without supply of GI strip and as per direction of Engineer-in-charge.
Cleaning of cable trench and taking out mud and rubbish materials including taking out pre-cast slab and re-fixing the same in position and depositing the rubbish at a distance of minmum 100 mtr.
Cleaning of cable tray, lifting the cables and again relaying as per direction of Engineer-in-charge.
Repair of cable tray with supply of all materials and as per direction of Engineer-in-charge.
Errection of scafholding in GAP1, S/S-26
Laying of cable above 95 sq.mm and upto 300 sq.mm cables of low voltage grade over any surface including clamping to the walls/poles/structures by suitable clamps as the case may be. Clamping hardware will be supplied by the party.
Laying of cable upto 25 sq.mm size of low voltage grade over any surfaceincluding clamping to the walls/poles/structures by suitable clamps as the case may be. Clamping hardware will be supplied by the party.
Laying of control cable upto 2.5 sq.mm size and 19 core cables of low voltage grade over any surface including clamping to the walls/poles/structures by suitable clamps as the case may be. Clamping hardware will be supplied by the party.
1" size Letter/number writing on metallic surface/wall with supply of all materials without back ground painting
2" size Letter/number writing on metallic surface/wall with supply of all materials without back ground painting.
3" size Letter/number writing on metallic surface/wall with supply of all materials without back ground painting.
4" size Letter/number writing on metallic surface/wall with supply of all materials without back ground painting.
8" size Letter/number writing on metallic surface/wall with supply of all materials without back ground painting.
Back ground painting with supply of all materials.
Supply of precast slab and putting over the earth pit chamber./cable trench, etc. size 4 sqft approx.
Supply, fabrication and erection of steel supports/frames structures etc. with two coats of anti corrosive primer, two coats of synthetic paint for mounting switches, starters, panels, luminaries, overhead cross arms as per direction of Engineer-in-charge.
Fabrication and erection of steel supports/frames structures etc. with two coats of anti corrosive primer, two coats of synthetic paint for mounting switches, starters, panels, luminaries, overhead cross arms butwithout supply of steel and as per direction of Engineer-in-charge.
DISMANTLING OF ELECTRICAL EQUIPMENT ABOVE 100KG AND DEPOSITING AT SITE AS PER THE DIRECTION OF ENGINEER-IN-CHARGE
I)TAKING DELIVERY FROM NALCO MAIN STORES, II) ERRECTION AND COMMISSIONING WITH III)FABRICATION OF SUITABLE MOUNTING STRUCTURE AFTER IV)COMPLETE CONNECTION WITH CABLE DRESSING OF PUSH BUTTON BOX, JUNCTION BOX, POWER SOCKET CABINATE, LOAD BREAK SWITCH AND OTHER ELECTRICAL CONTROL GEARS MORE THAN 100KG TO 500KG. MS FLAT AND CHANNEL FOR FABRICATION WILL BE SUPPLIED BY NALCO. EACH ACTIVITY REPRESENTS EQUAL ITEM VALUE/WEIGHTAGE.
Excavation of earth in all types of soil conditions including all the required tools and as per direction of Engineer-in-charge.
Excavation of concrete including all tools and as per direction of Engineer-in-charge.
Clamping of cables, earthing wires etc. with poles structures, walls after preparing clamps from GI or Aluminium sheets and fixing with GI nuts and bolts as per direction of Engineer-in-charge with supply of allmaterials including clamps.
BINAYAK ENGINEERING
M/s. Unitech Power Engineering & Co.
PROGRESSIVE ENGINEERS AND ASSOCIATES
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.PDF
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .