Upgradation of Middle School Panzinara B

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and Laying of stone soling hand packed in foundation trunches incl. dressing watering ramming incl. leads, lifts, head loads and carriages of all material involved complete.

providing and laying of Cast-in-situ of cement concrete work of nominal mix concrete 1:4:8 (1 cement 4 course sand: 8 graded stone aggregate 40 mm nominal size) nominal maximum size of stone aggregate 40mm volumetric batching in foundation trenches and ground floor, including curing but excluding cost of centering shuttering, including all leads, lifts, head loads and carriage of all matewrial involved complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. all leads, lifts, head loads and carriages of all material involved complete.

Providing and laying in position cement concrete of specified grade including curing but excluding 5 the cost of centring and shuttering. All work upto plinth level with: 1:14:3 (1 cement:1 coarse sand: 3 graded stone aggregate 20 mm nominal size). incl. all leads, lifts, head loads and carriages of all material involved complete.

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in superstructure upto floor V level in cement mortar 1:6 ( 1 cement : 6 coarse sand) incl. all leads, lifts , head loads and carriages of all material involved complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. all leads, lifts, head loads and carriages of all material involved complete.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. all leads, lifts, head loads and carriages of all material involved complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate incl. carriages of all material involved complete.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts.

Suspended floors, roofs, landings, balconies and access platforms

Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought 16 framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): imported wood.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.30mm.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick 19 float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.imported kail wood, 30mm thick.

Providing and fixing wire gauze shutters using galvanized M.S. wire gouze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.5. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge imported Kail wood, 30mm thick.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 22 10 as per 15: 1868) transparent or dyed to requined colour and shade with necessary screws etc. complete.100 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grode AC 23 10 as per 15: 1866) transparent or dyed to required colour and shade with necessary screws etc. complete 125 mm

Providing and fixing of MS Rod lock with inbuilt sliding bolt with locking system consisting of six 24 levers with all fittings and fixtures complete job 200 mm long

12mm cement sand plaster in 1:4 mix(1 cement 4 fine sand) including carriage of all materials involved complete.

15mm cement sand plaster in 1:6 mix(1 cement 16 fine sand) including carriage of all materials involved complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 2 mm thick.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Providing colour coated Hi-Rib sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick incl. providing ridges / hips / valley etc.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Plates, incl.incl. cutting, hoisting, fixing in position and applying a priming coat of approved steel primer also included. Welded

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 2nd class kail wood

Providing and fixing 2nd class kail wood plained eaves boarding. 250x32 mm (nominal size ).

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

25mm dia

32mm dia

25mm dia PPR Union

32mm dia PPR union

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc. PN-16 pipe , 25mm OD (SDR-7.4)

25mm dia

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

Providing and fixing brass stop cock of approved quality. 20 mm nominal bore

Providing and fixing of PVC pipes type B including all fittings and fixtures. The job includes all acessories.

100mm dia

75mm dia

100mm door bend /tees

75mm dia door bend / tee

100mm dia inspection collar

750mm dia inspection collar

75mm dia Floor Trap

Providing and fixing of CP fittings of standard make and quality.

Long nose bib cock 2 in one

short nose bib cock

Angle value

Wall Mixer

Basin Mixer

Health Faucet

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 19.15.2.2 20 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT grattings of approved quality and colour circular type

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 ( 1 cement : 4 coarse sand ) 150 mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished complete as per standard design : including excavation refilling and disposal of surplus eart including ci manhole cover with frame size (600x600mmx450mm)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Aplying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Dry random rubble masonry with hard stone (quarry) in foundation and plinth: With bond stone incl. all lead, lifts head loads & all carriages upto site of work complete.

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 15.7.4 In cement mortar

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceablematerial within 50 meters lead as per direction of Engineer-in-charge: 15.9.2 In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : o f sectional area 40 sqcm. and above.

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : o f sectional area 40 sqcm. below.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge

Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m, disposed material to be neatly dressed

Electrical

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/eq. standard make as desired by engineer incharge) single core cable in surface / recessed medium class PVC conduit, with modular switch (Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.), modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, modular plate, suitable Gl box, connections etc. as required. Modular Switch & Socket:-( Legrand Mylinc /SSK NV/schneider Leiva /ABB Tvisha make make.)

Wiring for lighting circuits/6-10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mrn FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- (Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.)

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

wiring for circuit/submian wiring along with earth wire with the following sizes of FRLSPVC insulated copper conducotr, single core cable in surface/recessed medium class PVC conductor as required including cost of 25 pv cmm conduit with chaisis etc cutting and making good walls complete job

2x1.5sqmm + 1x1.5sqmm earth wire

2x2.5 sqmm + 1x2.5sqmm earth wire

2x4 sqmm + 1x4.0 sqmm earth wire

2x10 sqmm + 1x6 sqmm earth wire

2x6 sqmm + 1x6 sqmm earth wire

Supply installation testing and commissioning of 15 W LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F. 0.95, THD 10%, CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years which includes replacement of fixtures of Philips/ Trulux/Wipro/Eq, standard make as directed by the engineer incharge

Supply Installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell 9/Bajaj/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/window as per site requirement and necessary connections

Supply. Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos, canopies, shackle kit, Power Factor not less than 0.9, Service Value Including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete USHA/ Havells/Crompton make, sample to be approved before installation

Supply and fixing of 6 amp/250 V AC fan dimmer step type 2 module with cover plate Anchor Roma urban/SSK NV/ equivalent make as directed by engineer incharge.

S/F testing and comm. Of MCB's 10 K of the below mentioned capacities in sub main controls legrand C curve/ Schinider/ L&T/equivalent make as directed by engineer incharge

6-32 Amp SP-MCB

40-63 Amp SP-MCB

supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, netural bus bar, earth bar, din bar, interconnentions, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)

supplying and fixing following rating, two pole, 415 V, 10 Ka 100 amp DP M.C.B "C" Curve.

supplying and fixing single pole blanking plate in the existing MCB DB complete as reqired.

Providing of Chemical earthing as per IS standards by way of digging 10 deep pit then embedding 3 meter G.I Earthing electrode, 80mm dia connecting the plate with main control board by 10 SWG copper wire with 1/2" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound

Supply Laying, tosting and commissioning of 16 sq. nim 2 core XLPE Insulated, PVC aluminum armored cable 650 V/1100 V Gando as per IS 7006 (Part 1) 1900 wth uplo Dato Amendments. Havells or Eq, standard make es directed by engineer Inchargo and making and terminalion with brass compression gland and aluminum lugs of read size