Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹83.4 LAdmitted-Finance | ₹83.4 L | L1 | Admitted-Finance |
| 2 | L2₹84.2 L+₹84,050 (1.01%)Admitted-Finance DOOR NO 2 561 BEHIND HOINA HOSTEL MOOGAMBIKA NAGAR PERIYAPALAYAM ROAD THIRUNINRAVUR CHENNAI 602 024 | CHENNAI | THIRUVALLUR | TAMIL NADU | 602024 | ₹84.2 L+₹84,050 (1.01%) | L2 | Admitted-Finance |
| 3 | L3₹85.8 L+₹2.4 L (2.90%)Admitted-Finance | ₹85.8 L+₹2.4 L (2.90%) | L3 | Admitted-Finance |
| 4 | L4₹1.2 Cr+₹39.4 L (47.2%)Admitted-Finance N0 15 ASHOK NAGAR MAIN ROAD MES ROAD 3RD CROSS STREET EAST TAMBARAM CHENNAI 600 059 | CHENGALPATTU | TAMIL NADU | 600059 | ₹1.2 Cr+₹39.4 L (47.2%) | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | tulsani associates L3 | M/s KM Marimuthu Achary L4 | SJM CONSTRUCTIONS L1 | M RAMANAIAH L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | M & L for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with using air blower to remove all loose dirt etc complete and apply cold polymer modified emulsion (Rapid Setting)(PME) mopping of total cold liquid PME 0.93 to 1.00 Ltr Per Sqm (undiluted) for two coats with mineral filler as recommended by manufacturer of PME (after diluting with water), each coat diluted in the ratio 1:1 (PME : Water) and ensureuniform finish of runway and complete all as specified and as directed
Note:-The tenderer shall take into consideration the following point while quoting the rate for this item
care shall be taken to fill wider gaps/cracks with 0.6mm to 2.36mm size coarse sand as per manufacturer's instruction.
Note:- The qty of PME to be used per Sqm shall be arrived based on 3 Nos trial patches of each size 10 x 5 Mtrs and based on the results of skid test. No extra payment shall be done for the same. | 69,500 | Sqm | 109.8 ₹76,31,100 Lowest | 170 ₹1,18,15,000 | 113.4 ₹78,81,300 | 114 ₹79,23,000 |
| 2.00 | M & L for painting adequate number of coats for lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm wide aqua based road marking paint white, golden yellow etc or of any tint approved MORTH, IRTC and AAI including preparation of old painted pavement surfaces. complete all as specified and as directed | 8,900 | Sqm | 90 ₹8,01,000 | 50 ₹4,45,000 | 45 ₹4,00,500 Lowest | 49.5 ₹4,40,550 |
| 3.00 | All as per serial item No 2.00 here - in - before but surfaces not exc 10 cm width or girth complete all as specified and directed. | 50 | XRM | 90 ₹4,500 | 40 ₹2,000 Lowest | 117 ₹5,850 | 65 ₹3,250 |
| 4.00 | Repair of pot holes / pin holes area exc 491 sqmm but not exc 1963 sqmm in flexible pavements / runway / PTT with ready mix Dense Asphaltic Concrete (DAC) using Polymer Modified Bitumen (PMB-40)including applying tack coat with PMBE and cutting as required i.e. shape and size and depth 30 mm incl cleaning, consolidating and ramming as required complete all as specified and directed. | 20 | Each | 3,600 ₹72,000 | 50 ₹1,000 Lowest | 900 ₹18,000 | 1,250 ₹25,000 |
| 5.00 | Repair of pot holes / pin holes area exc 1963 sqm but not exc 7850 sqmm in flexible pavements / runway / PTT with ready mix Dense Asphaltic Concrete (DAC) using Polymer Modified Bitumen (PMB-40)including applying tack coat with PMBE and cutting as required i.e. shape and size and depth 30 mm incl cleaning, consolidating and ramming as required complete all as specified and directed. | 15 | Each | 4,500 ₹67,500 | 400 ₹6,000 Lowest | 1,350 ₹20,250 | 1,550 ₹23,250 |
| 6.00 | M&L preparing existing cracks of 4 to 7 mm wide in flexible surface by brushing with wire brushes to remove all loose dust, materials etc, drying the cracks surface of moisture completely by means of mechanical driven air blower and providing Stir ShaliSeal® BT SB by a slow speed mixture (approx. 400 rpm) fitted with a suitable mixing paddle to ensure a homogenous mix. After stirring, wait for the product to settle in order to let entrapped air escape. Apply One coat of Primer Prime surface with ShaliTex® Primer @ 0.300 L / m2. Then allow it to dry for 24 hrs. After cured prime surface apply Specific Gravity of 1.20 ± 0.2, Solid Content, %, minimum 70% material of ShaliSeal® BT SB on the prime surface .Removing masking tape after application of bituminous selant joint and surface to be finished true levelled with existing adjoining pavement. complete all as specified and as directed (Make-STP Limited/Sika India Pvt Ltd/Maruti Bitumen Pvt Ltd/Choksey Chemical Pvt Ltd/IWL India Limited) | 15 | RM | 450 ₹6,750 Lowest | 600 ₹9,000 | 990 ₹14,850 | 650 ₹9,750 |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
24 Aug 2026, 6:00 pmClosed
COL RAJENDER KUMAR
CWE AF NORTH BANGALORE BELLARY ROAD JC NAGAR POST
SPECIAL REPAIR TO RUNWAY 12/30, PTT, CONNECTING LINK AND ATC DISPERSAL BY APPLYING PME AT AF STATION TAMBARAM
2026_MES_753148_2
87677CWEAFNTBM
Open Tender
Civil Works
Item Rate
180 days
GE (AF) TAMBARAM
AS PER NIT
7 documents required · 7 mandatory
₹1,000
GE (AF) TAMBARAM
₹1.7 L
Yes
2 Sept 2026
5 Aug 2026
26 Aug 2026
6 Aug 2026
24 Aug 2026
12 Aug 2026
6 Aug 2026 - 10 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M & L for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with using air blower to remove all loose dirt etc complete and apply cold polymer modified emulsion (Rapid Setting)(PME) mopping of total cold liquid PME 0.93 to 1.00 Ltr Per Sqm (undiluted) for two coats with mineral filler as recommended by manufacturer of PME (after diluting with water), each coat diluted in the ratio 1:1 (PME : Water) and ensureuniform finish of runway and complete all as specified and as directed
Note:-The tenderer shall take into consideration the following point while quoting the rate for this item
care shall be taken to fill wider gaps/cracks with 0.6mm to 2.36mm size coarse sand as per manufacturer's instruction.
Note:- The qty of PME to be used per Sqm shall be arrived based on 3 Nos trial patches of each size 10 x 5 Mtrs and based on the results of skid test. No extra payment shall be done for the same. | 69,500 | Sqm | - | - |
| 2 | M & L for painting adequate number of coats for lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm wide aqua based road marking paint white, golden yellow etc or of any tint approved MORTH, IRTC and AAI including preparation of old painted pavement surfaces. complete all as specified and as directed | 8,900 | Sqm | - | - |
| 3 | All as per serial item No 2.00 here - in - before but surfaces not exc 10 cm width or girth complete all as specified and directed. | 50 | XRM | - | - |
| 4 | Repair of pot holes / pin holes area exc 491 sqmm but not exc 1963 sqmm in flexible pavements / runway / PTT with ready mix Dense Asphaltic Concrete (DAC) using Polymer Modified Bitumen (PMB-40)including applying tack coat with PMBE and cutting as required i.e. shape and size and depth 30 mm incl cleaning, consolidating and ramming as required complete all as specified and directed. | 20 | Each | - | - |
| 5 | Repair of pot holes / pin holes area exc 1963 sqm but not exc 7850 sqmm in flexible pavements / runway / PTT with ready mix Dense Asphaltic Concrete (DAC) using Polymer Modified Bitumen (PMB-40)including applying tack coat with PMBE and cutting as required i.e. shape and size and depth 30 mm incl cleaning, consolidating and ramming as required complete all as specified and directed. | 15 | Each | - | - |
| 6 | M&L preparing existing cracks of 4 to 7 mm wide in flexible surface by brushing with wire brushes to remove all loose dust, materials etc, drying the cracks surface of moisture completely by means of mechanical driven air blower and providing Stir ShaliSeal® BT SB by a slow speed mixture (approx. 400 rpm) fitted with a suitable mixing paddle to ensure a homogenous mix. After stirring, wait for the product to settle in order to let entrapped air escape. Apply One coat of Primer Prime surface with ShaliTex® Primer @ 0.300 L / m2. Then allow it to dry for 24 hrs. After cured prime surface apply Specific Gravity of 1.20 ± 0.2, Solid Content, %, minimum 70% material of ShaliSeal® BT SB on the prime surface .Removing masking tape after application of bituminous selant joint and surface to be finished true levelled with existing adjoining pavement. complete all as specified and as directed (Make-STP Limited/Sika India Pvt Ltd/Maruti Bitumen Pvt Ltd/Choksey Chemical Pvt Ltd/IWL India Limited) | 15 | RM | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.19 MB
87677Tender.pdf
Tender Documents • 0.49 MB
BOQ_877023.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .