RATE CALL FOR NON DSR ITEMS PREPARING ESTIMATE OF DEVELOPMENT OF SANT SEVALAL MAHARAJ TEMPLE

EXTRA ITEM 24 - 41 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE DOOR CHOWKI WITH MOULDING ,IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). DOOR CHOWKI (L-1 TO L-4)

EXTRA ITEM 42 - 47 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE BEAM WITH MOULDING FIRST FLOOR MANDOWAR ( BEAM WITH MOULDING CARVING L -1, 2 , 3, 4, 5 & 6. WHITE RAJNAGAR OR EQUIVALENT MARBLE) HAVING MOULDINGS IN CONCAVE (KAPOTA) & CONVEX (KUMBHA) PROFILES, CHAMFERING AT THE ROUNDING EDGES, DEEP RECESSES, PROJECTED NICHES WITH VERTICAL PILASTERS AND FLUTED SHAFTS, THE CENTRAL NICHE HOLDING A DEITY SCULPTURE, LARGE PROJECTING CORNICES CREATING CHAJJA & PROJECTING BRACKETS IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED AND TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (FIRST FLOOR MANDOWAR) (L-1 TO L-6)

EXTRA ITEM 56 PROVIDING AND FIXING GROUND FLOOR DECORATIVE PANELS WITH CARVING IN WHITE RAJNAGAROR EQUIVALENT MARBLE THE PERIPHERAL BAND HAVING A PROJECTED CORNICE DESIGN IN CONTINOUS TORAN, THE INTERMEDIATE BAND HAVING LARGE MOTIFS, MEDALLIONS AND FILIGREE CARVING ALL COMBINED TO CREATE BIG NICHES, THE INNER BAND HAVING PETAL SHAPED RIBBED DESIGN REPEATED RADIALLY, THE CENTRAL APEX PART HAVING LARGE CARVINGS OF ORNATE LOTUS SLAB BOTTOM (CEILING), WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING IN MOTIF, MURALS, FLORAL EMBOSSING ETC. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE INCLUDING ROYALTY AND TESTING . (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE.(REFFER DRAWING FOR ITEM DETAIL). ( GROUND FLOOR DECORATIVE PANEL WITH CARVING - WHITE RAJNAGARMARBLE ) - GROUND FLOOR CHHAT

EXTRA ITEM 57 PROVIDING AND FIXING FIRST FLOOR DECORATIVE PANELS WITH CARVING IN WHITE RAJNAGAROR EQUIVALENT MARBLE THE PERIPHERAL BAND HAVING A PROJECTED CORNICE DESIGN IN CONTINOUS TORAN, THE INTERMEDIATE BAND HAVING LARGE MOTIFS, MEDALLIONS AND FILIGREE CARVING ALL COMBINED TO CREATE BIG NICHES, THE INNER BAND HAVING PETAL SHAPED RIBBED DESIGN REPEATED RADIALLY, THE CENTRAL APEX PART HAVING LARGE CARVINGS OF ORNATE LOTUS SLAB BOTTOM (CEILING), WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING IN MOTIF, MURALS, FLORAL EMBOSSING ETC. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE INCLUDING ROYALTY AND TESTING . (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE.(REFFER DRAWING FOR ITEM DETAIL). ( FIRST FLOOR DECORATIVE PANEL WITH CARVING - WHITE RAJNAGARMARBLE ) - FIRST FLOOR CHHAT (CEILING)

EXTRA ITEM 103 - 106 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE FIRST FLOOR KAKASASAN WHITE RAJNAGAR OR EQUIVALENT MARBLE) IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). FIRST FLOOR KAKASASAN (L-1 TO L-4)

EXTRA ITEM 107 - 117 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (CHOWKI SAMRAN [3. NO :- L-1, 2, 2A, 3, 3A, 4, 4A, 5, 5A, 6, 7 ]) WHITE RAJNAGAR OR EQUIVALENT MARBLE) HAVING CORBELLED LAYERS OF GRADUAL GEOMETRY OF A CONCAVE OUTLINE LEADING TO A CENTRAL KALASHA (HAVING AMALAKA - A BASE OF RIBBED DISC & KALASH - A POT-LIKE ELEMENT) AND MINIATURE KALASHAS IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (CHOWKI SAMRAN)(3 NO. FIRST FLOOR) (L-1 TO L-7)

EXTRA ITEM 118 - 128 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (CHOWKI SAMRAN [6 NO L-1, 2, 2A, 3, 3A, 4, 4A, 5, 5A, 6, 7]) WHITE RAJNAGAR OR EQUIVALENT MARBLE) HAVING CORBELLED LAYERS OF GRADUAL GEOMETRY OF A CONCAVE OUTLINE LEADING TO A CENTRAL KALASHA (HAVING AMALAKA - A BASE OF RIBBED DISC & KALASH - A POT-LIKE ELEMENT) AND MINIATURE KALASHAS IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (CHOWKI SAMRAN)(6 NO. FIRST FLOOR) (L-1 TO L-7)

EXTRA ITEM 129 - 140 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (INSIDE DOME :- L-1, 2,, 3, 4, 5, 5A, 6, 7 , 8, 9, 10, 11) WHITE RAJNAGAR OR EQUIVALENT MARBLE HAVING HANGING CARVED MOTIFS OF LOTUS BUDS, GHATA-PALLAVA (POT & FOLIAGE) OR KIRTIMUKHA FORMS AND HAVING MOULDED CORNICES AND RECESSES AT EACH LEVEL IN A COMBINATION OF CONCAVE-CONVEX PROFILES CONVERGING IN A CENTRAL PENDANT CARVED IN A LOTUS OR CHAKRABANDHA FORM IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (INSIDE DOME) (L-1 TO L-11)

EXTRA ITEM 141 - 178 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (OUT SIDE DOME L-1, 1A, 2, 2A, 3, 3A, 4, 4A, 5, 5A, 6, 7) WHITE RAJNAGAR OR EQUIVALENT MARBLE HAVING CORBELLED LAYERS OF GRADUAL GEOMETRY OF A CONCAVE OUTLINE LEADING TO A CENTRAL KALASHA (HAVING AMALAKA - A BASE OF RIBBED DISC & KALASH - A POT-LIKE ELEMENT) AND MINIATURE KALASHAS IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (OUTSIDE)( L1 TO L-7)

EXTRA ITEM 179 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (JHAROKHA WITH MOULDED BASE, STAMBH - SIDE PILLARS HAVING BASE-SHAFT-CAPITAL, PERFORATED JAALI IN GEOMETRIC LATTICE WORK, CHAJJA/OVERHANG STONE BEAM & A CROWNING ELEMENT OF DECORATIVE MEDALLION) FOR DETAILS REFFER DRAWING ) IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE (INSIDE & OUTSIDE) AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (JHAROKA )

EXTRA ITEM 180 - 182 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (SHIKHAR PETI :- L-1, 2, 3) WHITE RAJNAGAR OR EQUIVALENT MARBLE) IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE. TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING ROYALTY AND TESTING. COMPLETE (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (SHIKHAR PETI )L-1, L-2, L-3

EXTRA ITEM 183 - 186 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (SHIKHAR :- L-1 ) WHITE RAJNAGAR OR EQUIVALENT MARBLE) IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE, TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (SHIKHAR )(L-1)

EXTRA ITEM 187 - 191 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (SHIKHAR :- L2 ) WHITE RAJNAGAR OR EQUIVALENT MARBLE) HAVING MINIATURE SHIKHARAS (ANGASHIKHARA - SMALLER SPIRES THAT ORNATE THE BASE OF MAIN SHIKHARA) AND JHAROKHA PROJECTIONS (CENTRAL SHRINE LIKE PROJECTIONS) IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (SHIKHAR )(L-2)

EXTRA ITEM 192 - 196 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (SHIKHAR :- L- 3 ) WHITE RAJNAGAR OR EQUIVALENT MARBLE) ALONG WITH MINIATURE SHIKHARAS (ANGASHIKHARA - SMALLER SPIRES THAT ORNATE THE BASE OF MAIN SHIKHARA & URUSHRANGA - SUBSIDIARY SPIRES THAT CLING TO MAIN SHIKHARA) AND JHAROKHA PROJECTIONS (CENTRAL SHRINE LIKE PROJECTIONS) IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (SHIKHAR )(L-3)

EXTRA ITEM 197 - 202 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (SHIKHAR :- L4 ) WHITE RAJNAGAR OR EQUIVALENT MARBLE) HAVING MINIATURE SHIKHARAS (URUSHRANGA - SUBSIDIARY SPIRES THAT CLING TO MAIN SHIKHARA ADORNED WITH HALF KALASHA ON TOP) AND JHAROKHA PROJECTIONS (CENTRAL PROJECTIONS & AROUND NICHES) IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (SHIKHAR )(L-4)

EXTRA ITEM 203 - 210 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (SHIKHAR :- L-5 & L-6) WHITE RAJNAGAR OR EQUIVALENT MARBLE) HAVING MINIATURE SHIKHARAS (URUSHRANGA - SUBSIDIARY SPIRES THAT CLING TO MAIN SHIKHARA ADORNED WITH HALF KALASHA ON TOP) IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (SHIKHAR )(L-5, L-6)

EXTRA ITEM 211 - 212 PROVIDING AND FIXING WHITE RAJNAGAR OR EQUIVALENT MARBLE (SHIKHAR :- L7 ) WHITE RAJNAGAR OR EQUIVALENT MARBLE) HAVING MAIN KALASHA ON TOP (GRIVA - NECK OF SHIKHARA, AMALAKA - LARGE RIBBED CIRCULAR STONE DISC ON TOP OF SHIKHARA & KALASHA - POT LIKE FINIAL AT THE VERY TOP) IN MALE - FEMALE JOINERY WITH DEEP CARVING, DEEP GROOVES & DEEP MOULDING. ALL PROFILES, GROOVES, AND CARVINGS TO BE MACHINE CUT & HAND FINISHED ON ALL VISIBLE SIDE AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, HAND POLISHED TO A SMOOTH MATT OR SEMI GLOSS FINISH, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. ALL EXPOSED SURFACE TO HAVE UNIFORM TONE & POLISH; ALL SHARP EDGES TO BE ROUNDED OFF SLIGHTLY. APPLICATION OF FINAL ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT COMPLETE. INCLUDING ROYALTY AND TESTING. (PRIOR APROVAL OF SAMPLE/ BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (REFFER DRAWING FOR ITEM DETAIL). (SHIKHAR )(L-7)

Providing and fixing Sculpture made in FRP having base 2m x 4m and Height 5.4m on pedestal with granite cladding with all required civil & theme work, as per design intent/concept . all material used shall be of superior exterior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST, Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

PROVDING AND FIXING MILD STEEL FRAMEWORK WITH DESIGN OF CAST IRON (WEIGHT OF M.S.= 65 KG/SQM + WEIGHT OF C.I. = 30 KG/SQM ) AS PER DETAILED DRAWING & DESIGN PROVIDED BY THE PROJECT CONSULTANT/ ARCHITECT INCLUDING ALL APPROVED FIXTURES NECESSARY, WELDING, TRANSPORTATION, LOADING / UNLOADING , INSTALLATION WITH HYDRA AND SIMILAR EQUIPMENTS, FIXING OF DONE WITH HILTI MAKE HRD-C ANCHOR BOLTS COMPRISING OF POLYAMIDE PA6 GRADE SLEEVE AND COATED GALVANISED STELL GRADE SCREWS, PAINTING WITH TWO COAT OF ANTI-CORROSIVE PRIMER,EPOXY PUTTING AND TWO COATS OF EPOXY PAINTING, ETC COMPLETE. AS APPROVED BY ENGINEER/ CONSULTANT INCHARGE M.S. GATE WITH C.I. ( 65+30 KG/SQM ) Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST, Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

Loosely lay 150 GSM Geotextile (non-woven polyester) with a min of 100mm wide overlap after which drain boards and soiling can be allowed.

Laying protective screed of Avg 75mm M20 grade with slope 1:100 containing 12 mm, 100% virgin polypropylene fibers @ 0.9 Kg per Cu. Mt with a broom finish, well compacted, curing for 7 days etc. complete. The screed shall be laid in panels with 10mm wide construction joint and filling the panel joints with polysulphide sealant, SmartCare PU Hybrid Sealant (Concrete shall be provided by the client at free of cost)

Sintex Loft Tank ; 300 Litres. (Code: WS 30.01)

Supplying and fixing PTMT DELTA BIB COCK 123D; Prayag Make

Supplying and fixing PTMT DELTA PILLAR COCK 130D; Prayag Make

Supplying and fixing PTMT DELTA SINK COCK 132D; Prayag Make

Supplying and fixing PTMT DELTA WALL MIXTUE 1375D; Prayag Make

Door Wardrobe Providing and supplying wardrobe all Structure made in 18mm plywood board With visible 1mm SF laminated and other side Balancing with three shelf, accessories of make - ebco incluiding all fixtures and fastners, etc complete as per aproved shade and colour of Crystal. as per design intent/concept . all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge. Size: 900mm (L) x 600mm (D) x 750mm(H)

Luggage rack With Open Shelf Providing and supplying luggage rack all structure made in 18mm plywood board and outter side 1mm colour laminated and innner side white laminated with shutters accessories of make - ebco/hafele/hettich. incluiding all fixtures and fastners, etc complete as per aproved shade and colour of Crystal. as per design intent/concept . all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge. Size: 1100mm (L) x 600mm (D) x 750mm(H)

Mirror Panel Providing and supplying Mirror Panel Having Mirror Pasted on Plywood With Balancing Laminate board incluiding all fixtures and fastners, etc complete as per aproved shade and colour of Crystal. as per design intent/concept . all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge. Size: 600mm (W) x 1050mm(H)

Mid Back Chair CCTMB – 02 Providing and fixing in position Foam Seat and mesh Back ,PP Fixed Arm,Butterfly mechanism with tiltingfunction,BIFMA G320mm nylon base,nylon casters and Gas lift 100mm all fixtures and fastners, etc complete as per aproved shade and colour of Crystal as per design intent/concept . all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

Office Table With 3 Drawer Pedestal Providing and supplying Office table Top made in 25mm thick Plywood board With Visible side SF Laminate And Other side Balancing White. & Other Structure And Modesty made in 18mm thick Plywood board With Visible side SF Laminate And Other side Balancing White with all fitting, accessories of make - ebco incluiding all fixtures and fastners, etc complete as per aproved shade and colour of Crystal. Pedestal having 3 Drawer ( BBF ) made up of 18mm & 8mm BBF thick Ply with 1mm Laminate Finish incluiding all fixtures and fastners, etc complete as per aproved shade and colour of Crystal. as per design intent/concept . all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge. Size: 2400mm (L) x 900mm (D) x 750mm(H)

High Back Chair (CPHS 4018) Providing & Supply of High Back Chair, Center Tilt Mechanism,Metallic PP Base, Metallic PP +CushionedArms, Leatherite Upholstery incluiding all fixtures and fastners, etc complete as per aproved shade and colour of Crystal. as per design intent/concept . all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

PROVIDING AND FIXING JHAROKHA IN SEWALAL MAHARAJ AND RAMRAV MAHARAJ FORTRESS WALL OF SIZE (0.35 x 0.40 x 0.080M) IN SINGLE PIECE OF AGRA RED SANDSTONE IN MALE - FEMALE JOINERY, WITH CARVING, GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : ( AGRA RED SANDSTONE ) JHAROKHA (0.350 X 0.400X 0.080M) as per design intent/concept. all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

Additional carving work excluding stone, only labour rate for all Mandir Stone as per Architectural Design and Drawing.as per design intent/concept . all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

Providing and Fixing factory made solid core single leaf flush door 32 mm thk finished with approved laminate of 1 mm thk and making groove of 6 mm thk at 300 mm c/c with inlay of SS Flat 6 mm, with frame full width of wall & 150mm covering the front, back & top, internal & external side with patam & 1mm thk laminate on all exposed side of frame; including all fixtures and fastner with brass finish ,mortise lock, Tower bolt, latch, as per design and drawings . as per design intent/concept . all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

PROVIDING AND FIXING COUNTRY TEAK WOOD DOUBLE SHUTTER CARVING DOOR FOR TEMPLE AND YATRINIWAS INCLUDING FRAME WITH CARVING ,STYLE,WITH CARVING BOTTOM RAIL WITH CARVING,MIDDLE RAIL WITH CARVING , PANNEL- WITH CARVING. FIXED WITH HEAVY BRASS HINGES CARVING ON TEAK WOOD PANNELS, AND BRASS HANDLES BRASS FLOWER FROM BOTH SIDES, AS PER DETAILED DRAWINGS INCLUDING MOULDING, BRASS FIXTURES AND FASTENING, STOPPERS DOOR CLOSER AND FINISHING POLISHING ETC.THE ITEM NCLUDING TRANSPORTATION, LOADING,UNLOADING, STACKING, ETC.COMPLETE (INCLUDING DOOR FRAME) . (SAMPLE TO BE GOT APPROVED FROM EX ENGINEER BEFORE USE) (EXCLUDING GST )

Providing and drilling bore hole of 52 mm dia and long 1800 mm thro stone wall by mechanically. as per design intent/concept . all material used shall be of superior interior model & making grade. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

PROVIDING AND FIXING COUNTRY TEAK WOOD DOUBLE SHUTTER CARVING FOR FORTRESS WALL INCLUDING FRAME WITH CARVING ,STYLE,WITH CARVING BOTTOM RAIL WITH CARVING, MIDDLE RAIL WITH CARVING , PANNEL- WITH CARVING.FIXED WITH HEAVY BRASS HINGES LONG BRASS PANNELS IN CNC CUTTING/CARVING OVER TEAK WOOD PANNELS, AND BRASS HANDLES BRASS FLOWER FROM BOTH SIDES, AS PER DETAILED DRAWINGS INCLUDING MOULDING, BRASS FIXTURES AND FASTENING, STOPPERS DOOR CLOSER AND FINISHING POLISHING ETC.THE ITEM NCLUDING TRANSPORTATION, LOADING,UNLOADING, STACKING, ETC.COMPLETE (INCLUDING DOOR FRAME) . (SAMPLE TO BE GOT APPROVED FROM EX ENGINEER BEFORE USE) (EXCLUDING GST )REFER DETAILS IN DRAWING

De engagement (Removing) Sewalal Maharaj Mandir stone masonry in lime or cement mortar including stacking the materils, Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST,Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

Providing and applying epoxy paint primer with middle coat and top coat to super structure including scaffolding etc complete. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST, Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

Providing, supplying,lowering, jointing & Hydraulic testing H.D.P.E PIPE dia of 110mm in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST, Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge. Note: - H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil for (AS PER MJP SSR)

Providing, supplying,lowering, jointing & Hydraulic testing H.D.P.E PIPE dia of 160mm in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST, Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge Note: - H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 160 mm Dia shall be in coil for (AS PER MJP SSR)

Supply & Fixing of Full Body Vitrifid Tiles 16mm thick, size 600 x 1200 and required finish in plain pattern including Cement float, fillingjoints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer.. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST, Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST, Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge.

PROVIDING AND LAYING PLAIN FLOORING 18MM THK IN WHITE RAJNAGAROR EQUIVALENT MARBLE OF APPROVED QUALITY, VEIN AND COLOUR WITH MACHINE POLISH SURFACE FOR FLOORING IN REQUIRED PATTERN ON BED OF C.M. 1:6 AND FIXED WITH CEMENT SLURRY AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, CLEANING, WHITE CEMENT, FIXING, JOINT FILLING, MIRROR POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) Including transportation, all leads all lifts, Labour Charges, Inlcuding all taxes, excluding GST, Including defect liability period for 10 years, including all testing and standard specification, Including all completed rate and approved by the consultant and verified by Project Management Consultant (PMC) and as directed by Engineer In Charge. (FLOORING - WHITE RAJNAGARMARBLE ) - 18 MM THK

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and constructing Brick Masonry Inspection Chamber 90cmx45cmx90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, BrickMasonry, plastering from inside and with frame fixed incement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete.

Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Momentor Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines. The chemicals hould have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to he required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA 22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -10 mm dia 200mm depth SSR ITEM NO. 53.02

Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Momentor Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines. The chemicals hould have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to he required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA 22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -12 mm dia 240mm depth SSR ITEM NO. 53.03

Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Momentor Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines. The chemicals hould have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to he required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA 22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -16 mm dia 320mm depth SSR ITEM NO. 53.04

Providing and laying of RED ITALIAN MARBLE FLOORING 18 to 20 mm thick On C.M. 1:6 including filling joints with polymer base filler MIRROR POLISHING, CLEANING, ETC.COMPLETE. nosing/moulding the sharp edges wherever necessary, curing, etc. complete.(PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE.

PROVIDING AND FIXING BRASS INLAY (6MM DEPTH; 6MM THICK) WORK IN FLOORING ON ALREADY PROVIDED WHITE RAJNAGAR OR EQUIVALENT MARBLE, TO BE FIXED WITH MECHANICAL/ CHEMICAL OR BOTH ANCHORAGE ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING, WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE.