PERIODICAL SERVICES TO OTM/ MD ACCN IN ZONE C AND D AND REPAIR/ MAINT TO ROOF SHEETS, FALSE CEILING, WATER PROOFING TREATMENT, CHAJJAS, FACIA ETC IN OTM ACCN IN DRC AND UNIT AREA UNDER AGE (I) AYODHYA.

Amount

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying one coat of colour wash on old decorated surfaces complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old surfaces of walls by washing rubbing down and stopping, brooming down or steel wire brushing scraping down smoke soot, moulds mass, loose particles, scraping of complete old finishes and efflorescent salt and trading oil and greasy spots and applying one coat of cement based paint on prepared surface complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old surfaces of walls by washing rubbing down and stopping, brooming down or steel wire brushing scraping down smoke soot, moulds mass, loose particles, scraping of complete old finishes and efflorescent salt and trading oil and greasy spots and applying two coats of cement based paint on prepared surface complete all as specified and directed by Engineer-in-charge. Make :- Berger Durocem Neo (Water Proof & self curing cement paint) or equivalent

M&L for preparation of decorated old plastered or unplastered surfaces of ceilings by brooming down or steel wire brushing , scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old surfaces of walls including steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying two coats of white wash on old decorated surfaces complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated distempered surfaces and applying one coat of distemper oil emulsion on walls surfaces of approved tint and make complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old surfaces of walls by complete removal of existing treatment and applying Wall care white ( Putty) thickness not less than 1mm and sand papering surfaces to achieve smooth surfaces and applying two coats of oil emulsion distemper white or tinted complete all as specified and directed.

M&L for preparing old undecorated surface of wall etc including cleaning with broom and applying one coat of exterior weather proof paint complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on Brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc and M&L rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement in patches as in roof top parapet, ceiling of facia and wall complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound disemper over a layer of 1mm thick wall care putty (Birla/JK White Putty) to obtain smooth finish complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement based paint on prepared surface complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted surfaces of wood and wood based surafces of any description, not otherwise described over 10 cm width or girth complete and applying one coat of synthetic enemal paint complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying a coat of synthetic enemal paint complete all as specified and directed by Engineer-in-charge.

M&L for uprooting of trees ,trunks/plants from wall ,roofs and slabs of any position and any location in the building including cutting of brick work or concrete etc in position n.exc 1Sqm in area & upto full depth of root and making good the surface with PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed by Engineer-in-charge.

M&L for repairs to broken edges of roof projection , chajja, facia, Fins and simillars works girth n exc 45 cm with 15 mm thick plaster including cutting of reinforcement as required , dubbing coat in CM 1:3, required PCC 1:2:4using 12.5 mm stone aggregate up to 4th storey bldgs complete all as specified and directed by Engineer-in-charge.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty /wooden beads in square n exc .5 sqm each pane up to three storey hight complete all as specified and directed by Engineer-in-charge.

Dismantling plain or corrugated steel sheeting, any gauging, thickness, in roof covering complete all as speciifed and directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as speciifed and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including CM bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete complete all as speciifed and directed.

Taking down chowkats or frames n exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as speciifed and directed.

M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in CM 1:3 to ends, or edges of landings steps,cills, and cutting chases for concealed water tubing etc and making good cutting exceedding 20 cm girth complete all as specified and directed.

S&F mild steel in joist channel, angle or T section, fixed independently, without connecting plate ect (cut to ordinary length i.e, within 20mm of the length). of Gde Fe 410-W (Gde- E-250) Qty-A complete all as specified.

S&F rolled sections as in main & cross beams, hip & jack rafters, purlins where connected to common rafters & running rails & guides for sliding doors, fixed with angles cleats or other connecting plates conforming to Fe-410-W (Gde E-250) Quality A complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as speciifed and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as speciifed and directed.

S&F 6 mm thick Asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc with L-type or J-type or cranked hook bolts complete all as speciifed and directed.

S&F 6 mm thick Asbestos cement two piece adjustable plain wing ridge etc with L-type or J-type or cranked hook bolts complete all as speciifed and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed

M&L for PCC 1:3:6 Type C1 (20 mm graded aggregate) in lintel upto 1.5m clear span, cill, steps,seismic and other similiar bands, plinth courses,string courses, laacing courses parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like includind weathering, slightly rounded or chamfered angles and throating complete all as speciifed and directed.

M&L for preparation of newly steel surface of any description over 10cm width or girth, not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as speciifed and directed.

S&F 4 mm thick Asbestos Cement Plain building boards, fixed to timber framework with screws as in ceiling, flat all complete as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling including hangers 6mm dia GI adjusting level fixed to roof slab by means of ceiling cleats made out of G.I. Flat 40 X 3 mm size 60mm long and expansion hold fasterns 12.5mm dia 40mm long complete all as specified.

M&L for 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified.

S&F aluminium window/ventilator in lieu of wooden or steel window/ventilator, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame and necessary jointing cleats, glazing clips,louvers powder coated aluminium snap beading, screws etc complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, Star lock, hooks & eyes peg stays, and handles including connected items with and including, making good for dismantling portion in pcc 1:2:4 or CM 1:3, complete all as specified and directed. NOTE :(i) Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors. (ii) Cost of Rubber beading and fixing arrangements etc will be deemed to be included in quoted rate and no extra will be paid on this account.

S&F 10mm thick aluminium anodised grill and frame of approved make and pattern of fixed for aluminium windows including 'F' section complete all as specified and as directed.

S&F steel glass of ordinary quality 4.00 mm thick in panes n.exc 0.5 Sqm in each pane complete all as speciifed and directed..

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperature 1.40 & fixed with stainless steel wire staples complete all as speciifed and directed.

Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc complete all as speciifed and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement and including WPC @ 3% total weight of cement complete all as speciifed and directed. NOTE :- WPC shall be measured & paid Separately.

M&L for 10 mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 as in internal walls to be finished even and smooth without using extra cement .

M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper on walls over a coat of 1mm thick wall care putty, complete all as specified and directed. NOTE :- :GE/Engineer-in-Charge as approval in token satisfaction shall be obtained by contractor before applying finish work.

M&L for preparing newly plastered surfaces of walls and applying two coats of Acrylic smooth exterior paint of required shade : net work (two or more coats applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.20Kg/10Sqm complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as speciifed and directed.

M&L for preparing old decorated surfaces of walls and applying two coats of Acrylic smooth exterior paint of required shade : net work (Two or More coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.20Kg/10Sqm complete all as speciifed and directed.

Taking out old serviceable glass of any description, from old wooden or metal frames complete all as speciifed and directed.

S&F sheet glass of ordinary quality 3.00 mm thick in panes n exc 0.5 Sqm in each pane complete all as speciifed and directed.

Demolition of cement concrete of any description in any position, concrete filling as in sunken floor complete all as specified and directed.

M&L for 40mm thick cement concrete type B0 using 12.5 mm graded aggregate in floors complete all as specified and directed.

M&L for PCC 1:7:12 type F 2 with bricks as in filling of sunken slab after laying carrying out required tests for CI pipes joints WPT complete all as speciifed and directed.

Roughening surfaces of old concrete by sweepping clean and washing down with water to remove dust complete all as speciifed and directed.

M&L for 15mm thick rendering in in fair faces of brick work CM 1:3 with finishing the surfaces even and smooth without using extra cement complete all as speciifed and directed.

M&L for applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc after covering joints with PCC 1:2:4 mixed with WPC complete all as speciifed and directed. NOTE:- Water ponding test to be carried out before complete the work.

S&F GI spouts 40mm dia projecting atleast 10 cm clear of the wall complete all as speciifed and directed.

Supply only intergal water proofing compound complete all as specified and directed by Engineer-in-Charge

Dismantling of 100/75mm dia bore PVC pipes and including all fittings complete all as speciifed and directed.

S&F in repairs 110 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F 75 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F 110mm bore PVC (SWR) branch pipe, single Y equal or unequal with access door complete all as speciifed and directed.

S&F 75mm bore PVC (SWR) branch pipe, Double Y equal or unequal with access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bend of any radius complete all as specified and directed.

S&F 75 mm dia, PVC bend of any radius complete all as specified and directed.

S&F PVC (SWR ) vent cowl 110 mm bore complete all as specified and directed.

M&L for Non-skid Ceramic tiles 300mmx300mmx7 to 8 mm thick (square/ rectangular) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles and including 15mm thick CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface such as Toilet/Bathroom/Kitchen/ external wall cladding etc 350mmx250mmx 7mm/450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles and including 10mm thick rendering in CM 1:3 to receive wall tiles complete all as specified and directed.

M&L for 75mm dia PVC (SWR) floor trap ,plain with grating including jointing with solvent cement complete all as speciifed and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excludingfixing bolts, flushing cistern and flush pipe) and including trap, connection to drain (or out going pipe) and flushing pipe, antisyphonage pipe etc and including white seat cover complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x440 mm white, with integral foot rests (excluding cistern and flush pipe) but including connection to trap, and to flush pipe, anti-Syphonge pipe,and incl trap set in Concrete etc complete including making good to floor complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless syphonic action type flush cistern low level white with inlet ball valve float & handle including brackets and flush pipe of polythene of low or high density 32mm dia for low level cistern complete all as specified and directed

S&F in repair 15mm Angle stop cock of CP screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as speciifed and directed.

S&F Jet spray brass CP connection 15 mm size with PTMT nuts complete all as specified and directed.

M&L for Taking down/scraping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n exc 250m and including removal of existing of any description and replacing in same postion of any description and any thickness upto roof slab including surface treatment with polymeric water proofing membrane as under :- (a) Cleaning the roof surface from dust / dirt and any other foreign materials . (b) M&L for rendering 15mm thick in cement mortar (1:3) over concrete surfaces of roof, mixed with 3% integral water proofing compound by weight of cement or as per manufacturers instruction including finishing surfaces even and smooth without using extra cement. (c) Applying a layer of APP bases polymeric membrane 3 mm thick (minimum) weighing 3.5 Kg per Sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be 100 mm on transverse direction & 75 mm on longitudinal direction complete all as speciifed and directed. (f) M&L for factory made hydraulic pressed PCC tile (as protective layer) 250mm x 250 mm x 20 mm thick as spproved by GE conforming to IS -1237 with grey cement and pigment over and including 15 mm thick screed bed in cement motor 1:6 jointing with cement slurry & joint shall be 4 mm wide & sealed with 2 mm deep polysulphide compound complete all as speciifed and directed. NOTE:- Integral water proofing compound shall be measured and paid separately.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia complete all as speciifed and directed.

S&F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as speciifed and directed.

S&F in repairs 15mm bore stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle fancy type with long chank & cup (concealed type) chromium plated screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

S&F in repairs 125 mm size Shower rose, brass chromium plated with or with out swivel joint including fixing to steel pipe or union complete all as specified.

M&L for rendering 10 mm thick plaster in cement mortar (1:4) on concrete surfaces such as chajjas , finishing the surfaces even and smooth, mixed with integral water proofing compound @ 2% by total weight of cement complete, all as specified and directed. NOTE :- WPC shall be measured and paid separately.

S&F in repairs 15mm bore bib taps cast copper alloy, screwed down high pressure with crutch or butterfly handle fancy type chromium plated screwed for iron pipe for brass furule and fixed complete all as specified and directed.

General Note :- (a) Complete removal of existing treatment will be done by mechanical sander having mechanical vaccum mechanism with sanding pad of appropriate grit to make surface clean free from dust loose paint etc and no extra will be paid for this. The cost will be deemed to included in quoted rate. (b) Contractor will procure approved material in advance and deposited to MES store and will be issied by concerned JE on requirement basis. (c) Engineer-in-Charge approval in taken satisfaction shall be obtained by the contractor before applying each and every stage of periodical services. (d) The work shall be executed in multistoried buildings (i.e upto G+3) by providing all necessary scaffolding & all safety precaution during execution of the work and rate for the same deemed to be included in quoted rate. (e) Complete removal of existing treatment will be done by mechanical sander having mechanical vacuum mechanism with sanding pad of appropriate grit to make surface clean free from dust loose paint etcand no extra will be paid for this. The cost will be deemed to included in quoted rate. (f) Contractor will procure approved material in advance and deposited to MES store and will be issued by concerned JE on requirement basis. (g) Engineer-in-Charge approval in taken, satisfaction shall be obtained by the contractor before applying each and every stage of periodical services.

awashyakta enterprises

M/s SKP CONSTRUCTION