PERIODICAL SERVICES, REPAIRS TO PLASTERING AND CERTAIN REPAIRS TO FLOORING IN SECTOR 2 UNDER AGE B/R -I HYDERABAD

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement

M & L for rendering 10 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:4 finished even and smooth without using extra cement

M & L rendering 10 mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement

M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper of any tint including priming plastered surfaces with alkali resistant priming paint over a coat of wall care putty complete.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint to match with the existing wall surfaces complete all as directed

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete

M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as directed

M&L for walling of squre rubble regular coursed, well bonded, bedded and solidly hearted built in CM 1:4

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) including raising height of existing manholes complete all as specified and as directed.

M & L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius using old size brick built in CM 1:6 including raising height of man holes from ground level

M&L Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work.

M & L for Raised pointing to random rubble masonry coursed or brought up to courses in cement mortar 1:3.

Raking out joints to square rubble masonry, coursed or uncoursed and M & L for Raised pointing in CM 1:3

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for all as specified

M&L PCC 1:5:10 type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete in sunken floor all as sspecified

M&L applying hot bitumen blown type 85/25 grade two coat on concrete/plaster surfaces at the rate of 1.5Kg per Sqm per coat in suken floor

M&L rendering 15mm thick on fair faces of brick work or concrete surface in two layers ( 5mm thick in CM 1:4 over 10mm thick in CM 1:4) finished mixed with water proofing compound @ 3 % of cement by weight on top layers. Note :- WPC will measured and paid separately.

Supply only integral water proofing compound ISI marked

M&L for Non skid ceramic coloured tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 including dismantling old tiles complete

M&L for Non skid ceramic coloured tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 including dismantling old tiles complete

M&L for non skid ceramic tiles of 7 to 8mm thick square / rectangular area of each tile exceeding 0.11 sqm but not exc 0.18 Sqm as in vertical surface etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with the colour of the tiles over and including rendering 10mm thick backing coat in cement mortar 1:4 including dismantling old tiles complete all as directed

M&L for glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado ,jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid over and including rendering 10mm thick in cement mortar 1:4 as backing coat incluidng dismantling old tiles complete all as directed.

M&L for glazed ceramic tiles of size 300 x 450 x7mm thick on vertical surfaces such as skirting/dado ,jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid over and including rendering 10mm thick in cement mortar 1:4 as backing coat including dismantling old tiles complete all as directed.

S&F vitrified tiles 10mm thick any shade (Square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc laid in floor , set and jointed with 15mm thick screed bedding in CM 1:6 and pointed in white cement or coloured cement to match with colour of tiles including dismantling old tiles complete all as specified and directed.

All as per item No 30 above but on vertical surfaces such as skirting (Skirting is to be flush with wall) including taking down old terrazo tiles and plaster and 15mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as backing coat for tiles complete all as directed.

M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over and including 15mm thick screed bed in CM 1:4 including dismantling old work complete all as specified and directed.

S&F cast iron floor trap of 75mm bore, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified & as directed.

Dismantling of cast iron drain pipe of 100mm bore, jointed in CM and taking out of in trenches including excavation where required as directed by Engr -in- Charge.

Dismantling of cast iron drain pipe of 75mm bore, jointed in CM and taking out of in trenches includng excavation where required as directed.

S&F 75mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches complete all as specified and directed.

S&F 100mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches complete all as specified and directed.

S&F 100mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed on walls complete all as specified and directed.

S & F cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall, 75mm bore sand cast pipe

S&F as in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580mm x 440mm with integral foot rests ( excluding flushing cistern and flush pipe ) complete including connection to trap and flushing pipe antisyphonage pipe etc

S&F in repair vitreous china water closet Indian type 580mm long pan white with 'P' or 'S' trap front or back inlet footrest including provn of cement concrete bedding including connections to flushing cistern / pipe and making good disturbed portion to match with existing surface complete all as directed.

Demolition of old existing unserviceable WHB glazed and S&F vitreous china wash hand basin white of size 550 x 400mm flat back excluding taps, waste china and plug but including brackets, CP waste fittings 32mm dia including cutting for and pinning in ends of brackets or erecting stand complete in repair.

S&F in repairs counter top ( self rimming) wash hand basin white or colour tucked in granite slab including 15mm dia cast copper alloy chromium plated fancy type pillar cock, suitable PVC connection, PVC waste pipe and CP brass waste fittings complete all as specifiedand directed by Engr -in-Charge.

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level with inlet, ball valve, float, handle including fitting and fixtures and taking down the old damaged cisterns and providing connections to WC and flush pipe without any damage to the existing fittings complete all as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as directed.

S&F in repair PVC connection 15mm dia 600mm long with 2 Nos brass check nuts with washer complete all as specified

S&F in repairs steel finish jet spray Health faucet with anox 1 meter shower tube and clamp complete all as directed.

S&F in repairs grating doom 125mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as directed.

S&F in repairs CP grating of size 100/110 mm including fixing with white cement complete all as directed.

S&F in repairs plastic water closet seat, cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging devise complete all as directed.

S&F in repairs syphon set suitable for PVC low level flushing cistern of any type complete all as directed.

S&F in repairs handles suitable for PVC low level flushing cistern of any type complete all as directed.

S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as directed.

S&F in repairs stainless steel sink of 1.0mm thick for kitchen with out drain board of overall size 495x420mm and bowl size of 410x330mmx160mm including plugs, washers, bedding in cement mortar on to dwarft wall or cantilever brackets and connecting union to pipe complete all as directed.

S&F in repairs stainless steel sink of 1.0mm thick for kitchen with drain board of overall size 915x460mm and bowl size of 410x330mmx160mm including plugs, washers, bedding in cement mortar on to dwarft wall or cantilever brackets and connecting union to pipe complete all as directed.

S&F in repairs white vitreous china laboratory sink of size 600 x 450 x 200mm with plugs, washers and wastes including beding in cement mortar on to dwarf walls, or incluidng fixing cantilever brackets and connecting union to waste pipe complete

S & F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as directed.

S&F in repairs tubular towel rails chromium plated, 20mm dia, 'D' type 60cm long between flange complete all as specified and directed.

S&F in repair box type mirror PVC cabinet of size 300 x 450 x 150mm all as specified

S&F 15mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc., including taking down existing old GI tubing complete all as directed.

S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc., including taking down existing old GI tubing complete all as directed

S&F in repairs fancy type 15mm dia pillar tap standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 120gms) complete all as directed.

S&F in repairs 15mm dia angle stop valve of PTMT any colour, high pressure, screwed for iron pipe (minimum weight 90gms) complete all as directed

S&F in repairs 15mm dia bib tap with standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 90gms) complete all as directed.

S&F in repairs chromium plated, fancy type 15mm dia bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as directed.

S&F in repairs 15mm dia pillar taps cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as directed.

S&F in repairs chromium plated, fancy type 15mm dia stop valves /angle cock / concealed stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as directed.

S&F in repairs Classic 2 in 1 Bib Cock of 15mm dia with wall flange specifications complete all as directed.

S&F in repairs 15mm dia swan neck taps of 15mm dia, cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed.

S&F in repair wall mixture cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as specified and directed.

S&F in repairs sensors complete set including pillar taps of suitable size to exisitng including taking down existing wash hand basin and refixed in same place and incl all necessary fixing arrangements all as specified and directed

S&F in repairs complete set urinal sensors of suitable size to exisitng including taking down existing urinal and refixed in same place and incl all necessary fixing arrangements all as specified and directed

S&F in repairs chromium plated waste coupling of size 32/38mm for kitchen sink/ WHB of any size complete all as specified and as directed

S&F in repairs 32mm/38mm PVC waste pipe for WHB,& sink etc complete all as specified and as directed

S&F in repair of chromium plated overhead shower with revolving joint and 125mm long shower arm with wall flange 15mm bore fancy type any colour complete all as specified

S&F in repair CP brass bottle trap 32mm dia including joining to waste fitting and waste pipe complete all as directed

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete

S&F in repairs rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) three layered of 1000 ltr capacity hoisted fixed in position complete all as specified in SSR Part-I.

S&F in repairs rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) of 750 ltr capacity, triple layered, hoisted, fixed in position complete all as specified in SSR Part-I.

S&F in repair rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) of 500 ltr capacity, triple layered, hoisted, fixed complete all as specified in SSR Part-I.

S&F in repairs Symet ball valve 20 mm dia with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed (minimum weight of 210 gms), complete all as directed.

S&F in repairs Symet ball valve 25 mm dia with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed (minimum weight of 210 gms), complete all as directed.

S&F in repairs PVC water tank covers of any size & capacity complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area n exc 1.5 sqm each, complete all as specifed and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 and n exc 4.0 sqm each, complete all as specifed and as directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each from PVC/wooden frame.

S/F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as specifed and as directed.

S&F Powder coated (thickness powder coated not less than 50 micron) aluminium door shutter with frames, aluminium section weighing 0.55kg/mtr incl necessary joinig cleats, glazing clips rubber neoprene packing, handles 2nos in each door, hinges, anodised aluminium snap beading screws, 5.5 mm thick sheet glass with 25 micron sun control film, 12mm thick particle board prelaminated decorative both side, 6 levers lock etc,including takingdown old unserviceable old any type of door complete all as specified and directed

S&F in repair rectangular aluminium hollow section, powder coated of approved colour not less than 50 micron thickness, of size 101.60 mm x 44 mm x 2 mm thick as in partition including fixing with suitable size of nuts, bolts in floors and walls by drilling holes, both vertical and horizontal members including provision of sheet glass 5.5 mm thick and 12 mm thick particle board prelaminated on both side with decorative choice lamination, 25 micron sun control film, aliminium lugs, aluminium galzing channel, beading, complete all as specified and directed.

S&F powder coated aluminium grills of weight between 2.5 to 3 kg/sqm to aluminium window etc incl taking down old grills complete all as directed.

S&F venetion blinds (vertical type) of 100 mm wide strips with aluminium frame and all fittings (to be matched with existing patterns) & taking down old venetion blinds complete all as directed.

S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete

S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete

S&F 150mm size extruded aluminium alloy handles fabricated type anodized complete all as directed.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section complete all as directed.

S&F floor/door stopper of aluminium alloy body and tongue, anodised, with hand drawn steel spring, single legged complete all as directed

Demolition of cement concrete (unreinforced ) in ground floors and pavings n. exc 15 cm thickness ( below or above ground level)

M&L for 75mm thick cement concrete type D-2, 1:4:8 ( 40mm graded stone aggregate) as in foundation, sub base for complete all as specified.

M&L 75mm thick cement concrete type B-2, 1:2:4 ( 40mm graded stone aggregate as in paths parking etc finished even and smooth without using extra cement complete

M&L 100mm thick cement concrete type B-2, 1:2:4 ( 40mm graded stone aggregate as in roads, hardstanding etc finished even and smooth without using extra cement complete

Forming 12mm thick expansion joints for 100mm thick PCC filled with pre- formed bituminus filler and top 30mm primed and sealed with sealing compound Grade 'A' complete

M&L paving tiles machine pressed cement concrete tiles 30cm x 30cm x 20mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6 incluidng dismantling existing floor tile of any description complete all as directed.

M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawn, drvie ways or light traffic parking etc of required strength, thickness & size / shape , made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern finishing sweeping extra sand complete all as specified

M&L 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawn, drvie ways or light traffic parking etc of required strength, thickness & size / shape , made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern finishing sweeping extra sand complete all as specified

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement , 3 coarse sand) including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm) includng making drainage opening wherever required including demolition of existing kerb stone complete all as specified

M&L for providing chequered cement concrete rubber moulded coloured tiles glossy factory made of hydraulic pressed finish of 25 mm thick and size not less than 300x300mm thick set and jointed in neat cement slurry in floors with grey cement and pigments over and including 15mm thick screed bed or bedding layer in CM 1:6 including dismantling of old tiles and screed bed complete all as directed

Renewing cement concrete chequered tiles / inter locking tiles in patch, area n. exc 5 Sqm including removing and cleaning old tiles, preparing bed and laying or setting, jointing and pointing new or old tiles, including provision of PCC (1:4:8) sub base 75 mm thick complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying one coat of white wash all as specified and directed

M & L for preparation of old plastered or unplastered decorated surfaces and applying one coat of white wash on ceiling

M & L for preparation of old plastered or unplastered surfaces & applying Two coat of white wash on ceiling

M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distempering complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying Two coat of oil emulsion distempering complete all as specified and directed.

M&L for complete removal of existing treatment of plastered surfaces of walls and applying two coats of OBD over a coat of alkali resistance primer over a coat of wall care putty to achieve smooth & levelled surface complete all as directed.

M&L for preparation of old descorated plastered / unplastered surfaces of walls, soffits of chajja, cornices etc and applying one coat of cement base paint upto three storey building including scaffloding arrangement all as specified.

M&L for preparation of old descorated plastered / unplastered surfaces of walls, soffits of chajja, cornices etc and applying Two coat of cement base paint upto three storey building including scaffloding arrangement all as specified.

M&L for preparation of old surfaces of walls / chajjas and applying one coats of weatherproof antifungal exterior paint complete all as specified and directed.

M&L for complete removal of old surfaces of walls / chajjas and applying two coats of weatherproof antifungal exterior paint over a coat of primer including filling crack etc with coat of birla putty complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

M & L for preparation of old painted steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint of any tint all as specified.

M&L for preparation of old treated surfaces of wooden surface of any description over 10 cm in width or girth applying one coat of varnishing includng wood filler complete all as specified

M&L preparation of old surfaces of bricks, stone, concrete of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete

M & L for preparation of old painted steel surfaces of any description over 10cm in width or girth and applying one coat of aluminium paint of any tint all as specified and directed

Anjana corporation

Sai construction & services

M/s K Venkateswara Rao

SUN LIGHT HOUSE

Venkat Sai Enterprises

SM CONSTRUCTIONS

Maruthi international

K LAKSHMAN SINGH AND CO

sanjar enterprises

M/s ANUSHA ENTERPRISES