KIT Gasket - Turbocharger changeout to E [KIT Gasket - Turbocharger changeout to EMD pt no 40069484 (equivalent to EMD pt no 9575135) consisting of 13 items (i) GASKET.. Turbocharger mounting to EMD pt no 40040027 (Replaces 9570641)=1 no.(ii) GASKET.. Auxiliary generator mounting to EMD pt no 40040021 (Replaces 8261200) =1 no.(iii) GASKET.. Air duct to turbocharger - Edge molded = 2 nos. to EMD pt no 40034637(iv) GASKET.. Air duct to crankcase to EMD pt no 40028613 ( Replaces 9571670) = 2 nos.(v) GASKET.. Air duct to aftercooler to EMD pt no 40040012 (Replaces 9570602) =2 nos.(vi) SEAL.. O-ring - Stubshaft = 1 no. to EMD pt no 8294874 as per Drg.No. vii) GASKET.. Engine stubshaft cover to EMD pt no]

Bulk order will be placed on the manufacturer or its authorized agent. The manufacturer firm must have satisfactorily executed at least one single purchase order for a minimum of 20 percent of the total tender quantity of Zonal Railways/ PUs/ CORE for the tendered item [OR] for the items having same specification, but of different sizes/ ratings/capacities, during 5 (five) previous financial years and current financial year up to date of tender closing.

Trading enterprises and authorised agent/ dealers of OEM will not be extended any MSE benefits. Such enterprises are required to deposit E.M.D. mandatorily else their offer will be considered as unresponsive and will be summarily rejected.

Any firm quoting on behalf of OEM must submit valid & tender specific authorization certificate from their OEM along with their offer and agree for inspection by the nominated agency (as the case may be) at the premises of their princip[al, failing which their offer is liable to be rejected.

This contract shall be governed by the special condition for inspection as per Annexure-II attached along with this tender.

Offers without EMD will be summarily rejected subject to following exemptions: 1) only Micro and small enterprises i.e. MSEs registered for the tendered item in terms of railway board letter no. (Available on railway boards website) 2010/RS(G)/363/1 dated 05-July-2012 , 2) other railway and government departments, in terms of railway board letter no. (Available on railway boards website) 2004/RS(G)/779/11 dated 24th -July-2007 , 3) Indian ordinance factories in terms of railway board letter no. (Available on railway boards website) 92/RS(G)/363/1 dated 08 th - April- 1993 , 4) PSUs owned by owned by Ministry of Railways and PSUs for the group of items that are manufactured by them in terms of railway board letter no. (Available on railway boards website) 2003/RS(G)/779/5 dated 10th - Sept- 2004 5) Vendor registered with Railways for the trade group of the item tendered 6) Vendors appearing on the approved vendor list of RDSO/Pus/CORE for the tendered item, subject to approval status being valid on date of tender closing. EMD Shall be 2% of the tender value subject to a max of Rs 20 Lakh. In case, vendors exempted from submission of EMD as above fail to submit SD in stipulated time, damages shall be levied, for failure to it as per offer with regard to condition relating to SD as would have been applicable if the offer was from a non-exempted vendor. These damages shall be treated as recoveries outstanding against the vendor and dealt with accordingly.

Railway reserves the right to procure entire or bulk of the tendered quantity from BLW approved sources ( BLW Item ID: 2200123) for the tendered item. Tenderer to upload current and valid BLW approval letter with their offer. The status of the firm shall be reckoned as on the date of Tender opening and not thereafter, unless there is a case of downgrading/removal/suspension/banning.

Validity of offer shall not be less than 60 days.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India Policy.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.