Construction work of Community Building-cum-Work Shed at Mahadalit Tola Laundi, Pipardih Mauza, under Nauhatta Block. Located in Police Station No. 620, Khata No. 455, Khesra No. 2614, Rakba 07 decimals

All kinds of soil.

All kinds of soil

1:2:4(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

1:4:8(1 Cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size)

Foundations, footings, bases for columns

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Under 20cm wide

Weather shade, Chajjas, corbels, etc. including edges.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Cement mortar 1:4 (1 cement: 4 coarse send)

35 mm thick plain PVC door shutters

35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

25 mm thick (for cub-board) including nickel plated bright finished M.S.piano hinges with necessary screws

Fixed to steel windows by welding

Twin rubber stopper

Windows

Steel windows

Steel ventilators

Profile B

In gratings, frames, guard bar, ladders,

G.I pipes 40mm nominal bore(class B)

40 mm thick with 20 mm nominal size stone aggregate

18 mm thick

40 mm wide and 4 mm thick

1:6(1 cement: 6 coarse sand)

1:6(1 cement: 6 course sand)

1:4(1 cement: 4 course sand)

1:4( 1 cement: 4 coarse sand)

New work (three or more coats)

New work (three or more coats)

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

With average thickness of 120 mm and minimum thickness at khurras point to be 65

Carriage of Materials:-

Bricks

Coarse sand

Stone chips

Local Sand

Providing Informatory Board with all complete Job

Providing Inaguration Board with all complete Job

Bricks

Coarse sand

Stone chips

Local Sand

Total

100 mm dia

Sand cast iron S & S pipe as per IS:1729

100 mm dia

Sand cast iron S & S pipe as per IS:1729

Sand cast iron S & S pipe as per IS:1729

100 mm dia

Sand cast iron S & S pipe as per IS:1729

110mm diameter

Coupler

110mm bend

Shoe (Plain)

110mm Shoe

DRAINAGE

With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5

HAND PUMP

125 mm dia UPVC Casing Pipe confirming to IS : 12818-1983/1992

32 mm dia medium quality G.I. Riser Pipe and 8 Nos. 3 mtre length (3 mtr each length confirming IS:1239

125 mm dia x 40 mm x UPVC reducing socket (Heavy Quality)

40 mm nominal outer dia CPVC Pipe

Supplying drain 3 m as per design etc. all complete job.(Detail Est Attached)

For 125 mm dia UPVC Pipe

For 40 mm dia pipe from 30 meter deep to 61.0 meter

Supplying labour and equipment including 125 mm dia G.I. cap & fitting and fixing over the T/W properly and taking it out as per direction of E.I. (Cap will be property of the contractor) 1 No.

Providing all labours for fitting and fixing of India mark II hand pump including supplying all tools and plants requred for the all job complete as per direction of E/I.

Supplying all tools equipment all labours for lowering 32 mm dia medium quality G.I. Pipe (Riser pipe) in drilled T/W in 3 mtrs lenth

Providing all labour for fitting and fixing of deep cylinder with the riser pipe including necessary connecting and jointing materials, chrom leather bucket all tools & plants required for the job low water lever all complete job as per specification and direction of E/I.

Supplying all materials & labours for arrangement of additional water required during the drilling work all complete job as per specification and direction of E/I.

Developing and t Testing of T/W till the discharge is free from sand one item all complete job as per specification and direction of E/I.

Providign 100A B/W(1:6) in superstructure etc. all complete job.

Carriage of materials

Brick

Local sand

2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (Circuit wiiring)

4 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire

75mmX75mmX60mm

6 Amp. To 32 Amp. SP MCB 240 Volt

32 Amp SPN MCB 240 Volt

300 mm dia piles

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Mild steel 6.00mm dia

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Fixed to openings / wooden frames with rawl plugs screws etc.

In gratings, frames, guard bar, ladders,

1:6(1 cement: 6 course sand)

New work (three or more coats)

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Carriage of Materials:-

Difference Cost of materials :-

Bricks

Coarse sand

Stone chips

Local Sand

LAEO WD-01 SASARAM ROHTAS

GROUND FLOOR

AREA (Sq.Mtr)

CIVIL COST OF BUILDING

COMPLETE P.H.E. WORKS COST

ELECTRIC WORKS

BOUNDARY WALL

CONTINGENCY (0.5%)

LAEO WD-01 SASARAM

DESCRIPTION

All kinds of soil.

All kinds of soil

1:2:4(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

1:4:8(1 Cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size)

Foundations, footings, bases for columns

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Under 20cm wide

Weather shade, Chajjas, corbels, etc. including edges.

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Cement mortar 1:4 (1 cement: 4 coarse send)

35 mm thick plain PVC door shutters

35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

25 mm thick (for cub-board) including nickel plated bright finished M.S.piano hinges with necessary screws

Fixed to steel windows by welding

Twin rubber stopper

Windows

Steel windows

Steel ventilators

Profile B

In gratings, frames, guard bar, ladders,

G.I pipes 40mm nominal bore(class B)

40 mm thick with 20 mm nominal size stone aggregate

18 mm thick

40 mm wide and 4 mm thick

1:6(1 cement: 6 coarse sand)

1:6(1 cement: 6 course sand)

1:4(1 cement: 4 course sand)

1:4( 1 cement: 4 coarse sand)

New work (three or more coats)

New work (three or more coats)

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

With average thickness of 120 mm and minimum thickness at khurras point to be 65

Carriage of Materials:-

Bricks

Coarse sand

Stone chips

Local Sand

Providing Informatory Board with all complete Job

Providing Inaguration Board with all complete Job

Bricks

Coarse sand

Stone chips

Local Sand

Total

LAEO WD-01 SASARAM

ITEM NO

300 mm dia pile

Surface dressing of the ground

Earth work in excavation in foundation

Earth work in back filling

S/Filing Local sand in Foundation&Plinth

P/L PCC In

PCC 1:2:4 in

PCC 1:3:6 in plinth under floor

PCC 1:4:8 in foundation

Centering and shuttering for PCC work

Providing 50 mm th. DPC at plinth level

Extra for providing water proofing material

Prov.RCC M20

All work up to plinth level

All work from plinth level upto floor V level

(a)Walls columns, pillars, posts cind struts

roof beam, Roof slab,Lintel,Stair case,Chajja, Band

Add for using extra cement in the items of design mix

quintel

Centering&shuttering

Foundation

Roof&landing

Shelves (Cast in situ)

Column

lintel (up to 1.5m span)

Edges of slab under 20 cms wide

chajja

Extra for additional height in centring,

Reinforcement for RCC work

Ms 6 mm dia

TMT 8mm dia

TMT 10mm dia

TMT 12 mm dia

TMT 16mm dia

100A Brick work in Cm 1:6 in F/p

Extra for Brick work in superstructure above plinth level

7 cm Brick work with bricks ofclass 100A in CM

Half brick work with bricks of100 in cm 1:4

Extra for half Brick masonry in superstructure above pinth level

Extra for providing 2 nos 6 mm dia ms bars

Sal wood in choukhat of doors

Providing and fixing factory made P.V.C. door frame

Providing and fixing factory made panel PVC door shutter

P/F non decorative flush door shutter

30mm thick non decorative flush door shutter

25mm thick non decorative flush door shutter

P& F M.S grills

Fixed to steel windows Vide-/10.12.1

P & F cupboard or ward robe locks

Providing and fixing aluminium but hinge

P&F Alluminium sliding door bolt

P&F Alluminium sliding tower bolt

P&F Alluminium handles

P&FAlluminium hanging floor door stopper

Bright finished 100mm mortice lock

Providing and fixing aluminium tee curtain rod

P&F steel windows& ventilator

Extra for steel beading

steel windows -

steel ventilator -

Providing and fixing pressed steel door

Providing and fixing circular cast iron box for ceiling fan clamp

Steel window fastner

Steel window peg stays

Steel work welded in built up sections

40mm dia G.I pipe in stair hand rail

40 MM Th.Cement concrete flooring 1:2:4(

18 mm th.Cement plaster 1:3 in skirting

Providing and fixing glass strips

Providing and Laying 300 x300 mmCeramic

Ceramic glazed wall tiles in dado

100A one brick flat soling in plinth

Providing average 150mm thick dry rammed khoa

Making Khurras

Internal Cement Plaster

15mm CP 1:6 in internal surfaces

20mm CP 1:4 in external surfaces

6mm CP 1:4 in ceiling

12 mm cement plaster 1:3

White Lime wash

Water proof cement paint

Applying priming coat

Pink or grey primer on wooden surfaces

yellow primer on steel surfaces

synthetic enamel paint on wooden & steel

Forming groove of12x12mm and up to

Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations.(a) Applying and grouting a slurry coat of neat cement using 2.75kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand )admixed with proprietary water proofing compound conforming to IS:2645 over 20mm thick layer of cement mortar of mix 1:5 (1cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge.

With average thickness of 120 mm and minimum thickness at khurras point to be 65

Local Sand

Brick Flat Soling

70 mmth B/W 1:3

50mm DPC 1:2:4

12mm C.P 1:3 Neat

40mm Th C.C. Flooring

18mm Th C.P 1:3 In Skirting

Ceramic Tiles in dado

Kota+Marble Flooring

Kota+Marble Skirting

20mm Th C.P 1:3 In Water Proofing

120mm Th I.C. Based Water Proofing

Ceramic floor tiles

L.sand

Brick bats

LAEO WD-01 SASARAM

Cement

Local Sand

Brick Flat Soling

70 mmth B/W 1:3

Kota+Marble Flooring

Kota+Marble Skirting

Ceramic Tiles in dado

20mm Th C.P 1:3 In Water Proofing

120mm Th I.C. Based Water Proofing

Ceramic Floor Tiles

Mosaic Tiles in skirting over 12mm th.CP (1:3)

Mosaic Tiles Flooring over 20mm th. (1:4)

100 mm dia

Sand cast iron S & S pipe as per IS:1729

100 mm dia

Sand cast iron S & S pipe as per IS:1729

Sand cast iron S & S pipe as per IS:1729

100 mm dia

Sand cast iron S & S pipe as per IS:1729

110mm diameter

Coupler

110mm bend

Shoe (Plain)

110mm Shoe

DRAINAGE

With cmmon burnt clay F.P.S. (non modular)bricks with class designation 7.5

HAND PUMP

125 mm dia UPVC Casing Pipe confirming to IS : 12818-1983/1992

32 mm dia medium quality G.I. Riser Pipe and 8 Nos. 3 mtre length (3 mtr each length confirming IS:1239

125 mm dia x 40 mm x UPVC reducing socket (Heavy Quality)

40 mm nominal outer dia CPVC Pipe

Supplying drain 3 m as per design etc. all complete job.(Detail Est Attached)

For 125 mm dia UPVC Pipe

For 40 mm dia pipe from 30 meter deep to 61.0 meter

Supplying labour and equipment including 125 mm dia G.I. cap & fitting and fixing over the T/W properly and taking it out as per direction of E.I. (Cap will be property of the contractor) 1 No.

Providing all labours for fitting and fixing of India mark II hand pump including supplying all tools and plants requred for the all job complete as per direction of E/I.

Supplying all tools equipment all labours for lowering 32 mm dia medium quality G.I. Pipe (Riser pipe) in drilled T/W in 3 mtrs lenth

Providing all labour for fitting and fixing of deep cylinder with the riser pipe including necessary connecting and jointing materials, chrom leather bucket all tools & plants required for the job low water lever all complete job as per specification and direction of E/I.

Supplying all materials & labours for arrangement of additional water required during the drilling work all complete job as per specification and direction of E/I.

Developing and t Testing of T/W till the discharge is free from sand one item all complete job as per specification and direction of E/I.

LAEO WD-01 SASARAM

Estimated Cost:

Providign 100A B/W(1:6) in superstructure etc. all complete job.

Carriage of materials

Brick

Local sand

Coarse sand

Stone chips

Bricks

Coarse sand

Stone chips

Local Sand

LAEO WD-01 SASARAM

2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (Circuit wiiring)

4 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire

75mmX75mmX60mm

6 Amp. To 32 Amp. SP MCB 240 Volt

32 Amp SPN MCB 240 Volt

LAEO WD-01 SASARAM

ROHTAS

DESCRIPTION

300 mm dia piles

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Mild steel 6.00mm dia

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Fixed to openings / wooden frames with rawl plugs screws etc.

In gratings, frames, guard bar, ladders,

1:6(1 cement: 6 course sand)

New work (three or more coats)

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Carriage of Materials:-

Bricks

Coarse sand

Stone chips

Local Sand

TOTAL

LAEO WD-01 SASARAM

ITEM NO

300 mm dia pile

S/Filing Local sand in Foundation&Plinth

100A one brick flat soling

Prov.RCC M20

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Add for using extra cement in the items of design mix

quintel

Centering&shuttering

Column

Reinforcement for RCC work

Ms 6 mm dia

TMT 8mm dia

TMT 10mm dia

TMT 12 mm dia

TMT 16mm dia

100A Brick work in Cm 1:6 in F/p

Extra for Brick work in superstructure above plinth level

P& F M.S grills

Fixed to opening

Steel work welded in built up sections

15mm th. Cement Plaster

White Lime wash

Water proof cement paint

Applying priming coat

yellow primer on steel surfaces

synthetic enamel paint on wooden & steel

Local Sand

Brick Flat Soling

L.sand

LAEO WD-01 SASARAM

Cement

Local Sand

Brick Flat Soling

70 mmth B/W 1:3

Kota+Marble Flooring

Kota+Marble Skirting

Ceramic Tiles in dado

20mm Th C.P 1:3 In Water Proofing

120mm Th I.C. Based Water Proofing

Ceramic Floor Tiles

Mosaic Tiles in skirting over 12mm th.CP (1:3)

Mosaic Tiles Flooring over 20mm th. (1:4)

Footing

column

plinth protection