SPECIAL REPAIR TO CONCEALED ELECTRIC WIRING TO BLDG NO T 36 AT MDC AND PROVISION OF SOLAR WATER HEATER FOR BLDG NO P 86 P 87 CAPACITY 500 LTRS ESCORT OR LINE OF COD UNDER AGE EM W OF GE W AGRA

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, light fitting etc removing materials to store for keeping in safe custody for taking credit or reuse serviceable fittings/fixtures and making good the disturbed surfaces of wall/floors all as specified & as directed.

M&L for point wiring in concealed conduit with 1.5 Sqmm PVC insulated flame retardent low smoke (FRLS) single core stranded copper conductor for one light/fan/bell point in and including PVC conduit 19/20 mm dia to be terminated in pressed steel terminal boxes with 3 mm thick bakelite sheet top cover including 1.5 sqmm PVC insulated "Flame Retardent Low Smoke "( FRLS)" single core stranded copper earth continuity conductor controlled by one switch and/or one regulator and making good the disturbed surface complete all as specified and directed. (Wiring shall be made as per colour code in IS for Phase, neutral and earth)

All as per Item No. (2) above but for one socket outlet 5/6 Amps on independent bd controlled by one switch.

All as per item no (2) above but for one socket outlet 5/6 Amps controlled by one switch on same board with other switches.

All as per item No (2) here in before but for one socket out let 15/16 Amps controlled by one switch on independent board and wiring with 2.5sqmm cable.

S&F switch piano, flush type, single pole , 5/6 Amps, one way, 230 volts, ISI marked complete all as specified & directed.

S&F switch piano, flush type, single pole , 15/16 Amps one way, 230 volts, ISI marked complete all as specified & directed.

S& F socket outlet 5/6 Amps, flush type, piano, 5 pin 230 volts, ISI marked complete all as specified & directed.

S&F socket outlet 15/16 Amps, multipurpose 3 pin 230 V ISI marked complete all as specified & directed.

S&F ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals ISI marked complete all as specified & directed.

Supply & Fix lamp holder, insulated body, with back plate suitable for batten fitting complete all as specified and directed.

Supply and fix LED Bulb 15 watt suitable for lamp holder complete all as specified and directed. Make -Philips/Havells/Surya

Supply and fix electronic steping up type ceiling fan regulator suitable to operate at 230 volts 50 Hz , AC ISI marked complete all as specified & directed.

S&F in replacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket complete with one No MCB, SP, 20 Amps, 230 Volts, 10KA 'C' series complete all as specified and directed.

Supply & fix in replacement surface/wall mounting LED batten 20 watt luminaire having Aluminium housing and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No-LUMILINEPLUSBS20WLED865SPCSS or equivalent Model of Philips/Bajaj/CG as approved by GE.

Supply & fix in replacement, surface/ ceiling mounting type 34 watt LED luminaire PLUTO NEO PENAL 2X2 environmental friendly new generation aesthetically altra modern recess mounting with high brightness SMD LEDs as light source with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- PLUTONEO2X2PLR34WLED857S or equivalent model of make ,Philips/Bajaj/ Crompton Greaves as approved by GE.

Supply & fix in replacement, outdoor street light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- ENDURAPEARLNEOSL40WLED757PASYTOPC, Phillips cat part no BRP052 LED 036 CW HP SLA FG S1 PSU GR or equivalent as approved by GE.

Taking down care fully sub main wiring / service connections of any size including batten / conduit and making good the disturbed surfaces of wall/ floor complete all as specified & directed.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L sub main wiring of two single core PVC insulated unsheathed stranded copper conductor cables of size 4 Sqmm, 1100 volts grade drawn through and including 20mm dia PVC concealed conduit of 1.2 mm wall thickness including all fixing accessories, and 2.5sqmm PVC insulated stranded copper conductor cable as earth wire(green colour) connected to earth dolly and making good the disturbed surface complete all as specified and directed. (Phase-Red, Neutral – black in colour of cable) Note:- Both running cables including earth wire shall be measured & paid for as single length.

Taking down distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces.

Supply, fix, connecting & testing factory made epoxy powdercoated, distribution board (sheet metal encloser), triple pole and neutral, 4 ways (verticle DBs), with metal door and fixed flush wall and suitable for universal mounting with having copper bus bar of capacity 200 Amp rating, of suitable size, for double door and suitable for using MCCB, 4 pole as incommer and SPMCBs as out going confirming to IS 13032 complete all as specified and directed. (Note :- Switch gears shall be measured and paid separately under appropriate item of Sch 'A'.

Supply, fixing, connecting & testing factory made epoxy powdercoated, distribution board (sheet metal encloser), single pole and neutral, 8 ways horizontal DBs), with metal door and fixed flush wall and suitable for universal mounting with having copper bus bar of capacity 200 Amp rating, of suitable size, for double door and suitable for using MCB, SPN as incommer and SPMCBs as out going confirming to IS 13032 complete all as specified and directed. (Note :- MCBs shall be measured and paid separately under appropriate item of Sch 'A'.

Supply and fix MCCB 4 pole 160 Amp Icu 16 Kilo Amp and Ics 100% of Icu with adjustable 70% to 100% and thermal magnetic release complete all as specified and directed.

Supply and fix MCCB 4 pole 100 Amp Icu 16 KA and Ics 100% of Icu with adjustable 70% to 100% and thermal magnetic release complete all as specified and directed.

Supply & fix MCB SPN, 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

S & F MCB 6 to 40 Amps SP, 240 Volt , 'C' series complete all as specified and directed complete all as specified and directed.

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

Supply and fix XLPE insulated armoured heavy duty multistranded electric cable with aluminium LT conductor 1100 volts grade ISI marked laid in trenches, fixed to wall poles etc all as specified and directed of size 50 sqmm 3.5 core .

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft / loose / soil for taking out/laying cable etc complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed.

Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed.

M&L sub-class 'B' bricks, well burnt, laid breadth wise along the length for cable laid in trenches over sand cushion laid for UG Cable protection, complete all as specified and as directed.

M&L for sand cushioning dry fine for cable cushioning 8 cm below the cable and 15 CM above cable complete all as specified & as directed.

Material and labour for galvanised steel tubing light grade for protection of cable/earth continuity conductor fixed to poles/walls/roof or laid in floors, road crossing/in ducts fixed with clamps, bolts, nuts and washers etc complete all as specified and directed for 50 mm dia bore pipe.

Supply and Installation, commissioning and testing of pressurized with heat exchanger Solar water heating system, minimum 2000x1000x100 mm size 5 nos Flat plate collector type with heat exchanger of 500 litre per day capacity made out of SS-304, 1.5 mm thick, 20 mmdia, Inner Tank insulation 50 mm PUF & external tank GI powder coated having suitable capacity electrical heating backup system but not less than 3.00 KW with electrical backup supply cable / copper wiring from nearest supply point available in existing building for and including PVC vertically moulded tank of capacity 500 ltrs complete all as specified and directed. Note: Quoted rate is inclusive of provision of staging not less than 2 mtr from the roof top for hoisting PVC water make up tank of solar water heating plant fabricated using 50 x 6 mm and 6 mm MS sheet on top angle iron frame of suitable size but not less than 1.20 x 1.20 mtr, fixed on RCC roof as per manufacturer's instruction duly painted with two coats of synthetic enamal paint over a coat of red oxide primer.

Supply and fix bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule size 15 mm dia pipe complete all as specified and directed.

Supply and fix brass stop valve high pressure screwed both ends suitable for steel water tubing of size 20 mm dia pipe complete all as specified and directed.

Supply and fix brass stop valve high pressure screwed both ends suitable for steel water tubing of size 25 mm dia pipe complete all as specified and directed.

Supply and lay pipe galvanized iron, laid in trenches or fixed on wall/ roof/floor with shaddles, “Medium class”, including all GI fitting (such as Tee, elbows, nipples, short / long pices, sockets etc as required at site) of size 15 mm dia bore complete all as specified and directed.

All as per item No 40 here in above but, 20 mm dia pipe

All as per item No 40 here in above but, 25 mm dia pipe

Lagging to pipes used in internal/ external water supply or plumbing all round with, 25min thick bonded mineral pipe sections of density 144 Kg/cum wool preformed ‘SNAP ON’ conforming to IS 9842 and over all clading with 0.01 mm thick aluminium foil suitable for 15 mm bore pipe

All as per item no. 43 above but for 20 mm bore pipe

All as per item no. 43 above but for 25 mm bore pipe

M/s SCHOLASTIC ENTERPRISES

virendera singh