REPAIR TO BOUNDARY WALL, FENCING, KERB STONES, RCC JALLIES AND OTHER ALLIED WORKS AT BAIRD PLACE, POLO ROAD AND PARADE ROAD IN THE AREA OF AGE BR-II UNDER GE EAST DELHI CANTT-10

Amount

Demolition of cement concrete, unreinforced, of any type and in any position below or above ground level, complete all as specified and as directed.

Demolition of cement concrete, unreinforced, in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc., to receive new plaster, complete all as specified and as directed.

Dismantling posts or struts (wood, steel, or RCC) any section, including taking out embedded portion & making good disturbed ground, post embedded in concrete, brick work, masonry etc., complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Excavation in post holes (or similar holes) in any type of soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

Plain cement concrete 1:3:6, Type C-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in benching, coping, lintels upto 1.5mtr span, cills, seismic and other similar bands, plinth courses and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., complete all as specified and as directed.

Providing precast reinforced cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate as in kerb stones, mud stops and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., including necessary form work required if any, complete all as specified and as directed.

Providing precast reinforced cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate in louvers and jallies, 35 mm thick (measured solid), including all mouldings but excluding frame (precast frame shall be measured separately) set in cement mortar 1:4, fixed in repairs, complete all as specified and as directed.

Precast RCC coping/post of size 600mm x 100mm x 50mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size, complete all as specified and as directed.

Precast Prefabricated cement concrete columns of required size and shape suitable with proper size channel for fixing of Pre Fabricated RCC wall panels of required size as per site requirement including fixing of columns to a required depth as per manufacturer's insturctions, complete all as specifed and as directed. Note :- Excavation of post holes for fixing of Columns shall be measured and paid seprately.

Precast Prebabricated RCC wall Panels of 40 to 50 mm thick with weep holes, up to ground levels of suitable size fixed properly in prefabricated columns and sealed properly with filling materials as per manufacturer's instructions, complete all as specified and as directed.

Precast Prebabricated RCC wall Panels of 40 to 50 mm thick with of suitable size fixed properly in prefabricated columns and sealed properly with filling materials as per manufacturer's instructions, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:4 using old size bricks, complete all as specified and as directed.

All as per description of Srl Item No.- 16 here-in-before but except bricks, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan built to any radius in cement mortar 1:4 using old size bricks in half brick walls, complete all as specified and as directed.

Cutting holes exceeding 150Sqcm but not exceeding 400Sqcm into or through brick walls built in cement mortar for inserting hold fasts/angle posts etc., and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B-1, thickness of wall exceeding half brick but not exceeding one brick thickness, complete all as specified and as directed.

Mild steel work such as angle iron post , flat iron in fencing including cutting top to required shape including welding with proper overlapping & welding MS Plate with angle iron bottom as directed, drilling holes notching for wire etc., embedded in concrete fixed vertically conforming to grade FE-290 E-165, complete all as specified and as directed.

Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc., complete all as specified and as directed by Engr-in-charge. Note : (Each line wire to be measured) .

610mm dia concertina coil (effective dia of coil 550mm with stretched length of each coil 6mtr) including two handles and spikes at both ends of each coil with dove tailed clips, fixed in repairs,complete all as specified and as directed by Engr-in-charge.

Supply only MS galvanised Chain link fencing GI wire of any dia, mesh to be of any shape and size as approved by GE, complete all as specified and as directed by Engr-in-charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and as directed by Engr-in-charge.

Mild steel round bars10mm dia and over, cut to length, bent to shape as required including cranking, hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering, in doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, conforming to Gde Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

75 mm thick cement concrete 1:3:6 type C-2 (using 40mm grade crushed stone aggregate) finished even and fair as in plinth protection, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying a layer of 2mm thick Birla white wall care putty, complete all as specified and as directed.

Prepration and complete removal of existing treatment of walls unplastered or unplastered and applying 2mm thick birla white wall care putt, complete all as specified and as directed.

Prepration of newly plastered surfaces of wall and applying two coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over one coat of primer from the same manufacturer, complete all as specified and as directed.

Prepration of old plastered surfaces of wall and applying two coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over one coat of primer from the same manufacturer, complete all as specified and as directed.

Preparation of stone/ concrete surface of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paints over priming paint plaster , complete all as specified and as directed.

Preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and as directed.

2 mm thick Fibre glass reinforced translucent colourd plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, gate etc., and similar work as required, including taking down existing unserviceable coverings any type, fixed in repairs, complete all as specified and as directed.

Factory made steel fibre reinforced (SFRC) drain covers slab with frames incl necessary hold fast/hooks (medium duty) of size 600x450 x 100 mm with provision weep holes as per manufacturer design to inlet of surface water , complete all as specified and as directed.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

M/s Durga Traders

M/s Shubh Enterprises

S GOURAV PRAKASH ENTERPRISES

M/S MSD & Associate

Vipul Construction

MAA SANTOSHI ENTERPRISES

Baljeet Builders & Interior Decorators

M/S VERMA BUILDER