PROVIDING IMPROVEMENT ACCESS TO WATER THROUGH HOUSE HOLD CONNECTIONS IN EXISTING WATER SUPPLY SCHEME DODRA, BLOCK BUDHLADA, DISTT. MANSA

Item Wise Description :

Carriage of Earth, Surkhi, sand, Fly Ash, bajri, ballast, stone boulders, kankar and building rubbish, Earth. Carriage of material excluding initial lead of 5 Km (a) Phillaur Sand (Av. Lead 167 Km) 0 to 167 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (b) Ghaghar Sand (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (c) Bajri Sand (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. CSR Item No. 6.6

Cement concrete 1:8:16 (b) With stone aggregates 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type CSR Item No. 10.6 (b) (ii)

Cement Concrete 1:2:4 (a) With stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type CSR Item No. 10.13 (a) (ii)

12.5 mm thick cement plaster 1:4 CSR Item No. 15.9

20 mm thick cement plaster 1:4 in Two Coat Work CSR Item No. 15.20

White Wash (Three Coat) CSR Item No. 16.3

Applying priming coat with metal primar on new steel or iron work including preparation of surface. CSR Item No. 16.20

Painting two or more coats with aluminum paint to give an even shade excluding priming coat. CSR Item No. 16.25

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position (c) Tees angles & channels CSR Item No. 18.1

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. and excavation of pipe line, minimum cover on pipe One meter (6kg/cm2 pressure). (xii) 63 mm o/d CSR Item No. 28.13 b) + 28.18 + 28.2 (xii)

(xvi) 160 mm o/d CSR Item No. 28.13 b) + 28.18 + 28.2 (xiv)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI (a) 80 mm i/d Sluice Valves CSR Item No. 28.27 (A) (a)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI (b) 100 mm i/d Sluice Valves CSR Item No. 28.27 (A) (b)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI (c) 100 mm i/d Sluice Valves CSR Item No. 28.27 (A) (c)

Bailing out water from the trenches for making new connections in existing pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. a) Connection with pipe line Upto 300mm i/d CSR Item No. 28.49 (a)

Hand boring horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki methed. including excavation, stringing and jointing of pipe upto 160 mm complete. CSR Item No. 28.71

Non Schedule Items Providing, installing, testing & Commissioning one no. Electronically actuated, Diaphragm operated, Metering system, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Liters of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 kg./ sqcm and suction lift not less than 1.5m as per DWSS standard specifications. (NS)

Non Schedule Items Dismantling brick or flagged stone flooring without concrete base. (NS)

Non Schedule Items Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. (i) Water Connection on Old pipe line (NS)

Non Schedule Items Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. (i) Water Connection on New pipe line (NS)

Non Schedule Items Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. (i) Repair of old Water Connection (NS)

Non Schedule Items Labour for making 3 No. holes & 1 No. cut in case of angle iron pickets. (NS)

Non Schedule Items Providing & fixing barbed wire fencing 3 ply rating with angle iron pickets with M.S. clips including labour for stretching of barbed wire & cost of clips. (NS)