Ramnagar Mehaura to Chauraghat ke Pahuch Marg ke Marammat and Anurakshan Karya

Supply and Laying of Geo textile (sheet) made of 240 gsm woven multifilament polypropylene yarn for filter material underneath pitch in slopes complete.As per Irrigation Dept. S.I. No. 34+41

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications As per MoRTH Spec.2504 Sr no-15

Cement Concrete with 4cm. gauge approved stone ballast, approved coarse sand and cement in the proportion of 6:3:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work.as per S.I. No. 280

Furnishing & Placing reinforced/ cement concrete in super structure a per drawing and Technical Specification

Mild steel or iron work in heavy sizes such as trusses, built up gates, record racks, roof work, gates etc. wrought to required form, including drilling holes riverting or welding where necessary & their fixing, required for proper completion of work. As per SI No. 503

Mild steel or iorn work in plain work such as in reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shapes as necessary and bending for the proper coppletion of the work and including supply of steel and its wastage etc. and all labour and tools and plants required for proper completion of work Note: the steel shall be bent cold and bends hooks and authorised over lapping shall be measured. as per S.I. NO. 504

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, upto 1km transporting to site, spreading, grading to required slope and compacting to meet requirement of 95% of proctor density.MORT&H 305 (3.18) AS per S.I. NO. 09

Providing and ercting a ' W ' metal beam crash barrier comprisng of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150x75x5 mm spaced 2 m center to center 1.8 m high, 1.1 m below ground/ road level, all steel parts and fitments to be galvanised by hot dip process , all fittings to confirm to IS:1367 and IS:1364 metal beam rail to be fixed on the vertical post with a spacer of channel sction 150x75x5 mm. 330 mm long complete as per clause 810

Finishing walls with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all material, labour and tools & plants etc. required for proper completion of the work. As per S.I. No .662

Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required shade (Two or more coat applied @ 1.43 Ltr/10Sqm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm.) As per CPWD 13.47.1

Brick soling with straight over burnt bricks laid on edge and dry including preparation of subgrade to prescribed camber and including supply of brick filling joibts with local earth spreading a blinding coat of 1cm. (3/8") depth of local earth of P.I.5 to 7 or sand over the entire surface & including labour, T & P etc. required for proper completion of the work. as per S.I. No. 762b

First class brick work in 1:3 cement and fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials , labour and T&P etc. required for proper completion of the work .SI No-306

First class brick work in 1:4 cement and fine sand of 1.25 F.M. mortar in super structure including supply of all materials , labour and T&P etc. required for proper completion of the work .SI No-307

12 mm. thick plaster with cement mortar consisting of 1 part cement and 3 part of approved coarse sand. Minimum thickness not to be less than 10 mm including supply of all materials, labours and T&P etc. required for proper completion of work as per SI No-583

Please Enable Macros to View BoQ information