Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-AOC H NO 33 VPO KHERI SALABAT PUR DISTT RUPNAGAR PUNJAB 140111 | RUPNAGAR | RUPNAGAR | PUNJAB | 140111 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹8.0 L+₹36,055 (4.69%)Rejected-Finance HYDERABAD TELANGANA 500076 INDIA UDYAM TS 02 0009467 | MEDCHAL MALKAJGIRI | TELANGANA | 500076 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹8.5 L+₹79,372 (10.3%)Rejected-Finance CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹9.7 L+₹2.0 L (25.7%)Rejected-Finance RAM SHIV COLONY GALI NO 2 NAIKA CHATNAG ROAD JHUNSI PRAYAGRAJ UP 211019 | PRAYAGRAJ | UTTAR PRADESH | 211019 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹10.0 L+₹2.3 L (30.1%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | R N Enterprises L6 | SANJEEV ENTERPRISES L5 | POWER TECH ENGINEERS L2 | Jai Maa Electrical Works L3 | TARA ENTERPRISES L4 | Pal Engineering Services L7 | LA ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour for conducting ‘B’ check of DG sets of 82.5 KVA to 100 KVA capacities to carry out maintenance/servicing as given below complete all as specified and directed
(i) Change of diesel filter/oil filter, air filter, replacement of engine oil etc.
(ii) Check and clean engine, alternator battery, instrument panel, elect panel, timer, contactors, meters and others etc.
(iii) Tightening of all nuts & bolts of DG set and its accessories.
(iv) Check for any diesel leakage from any point and rectify if observed.
(vii) Check electrical connections of engine . The wiring shall be maintained properly and engine starting system from engine instrument panel is to be kept in order.
(viii) Check and tighten the AVM pads nuts and bolts, change AVM pads if found damaged , AVM to be provided by contractor.
(xiii) Oiling, greasing and checking for proper & smooth functioning and testing on load complete.
Note 1. :- Price for minor spare parts like nut bolts, grease, copper conductor cable for control wiring, AVM pads will be included in the quoted rates against each capacity.
2. Price for Major spare parts diesel filter, oil filter, air filter, engine oil and coolant required for replacement will be measured and paid separately under respective item of schedule. | 2 | Each Job | 25,000 ₹50,000 | 2,500 ₹5,000 | 10,000 ₹20,000 | 1,500 ₹3,000 | 2,000 ₹4,000 | 2,000 ₹4,000 | 500 ₹1,000 Lowest |
| 2.00 | All as per serial item no 1 above but for 225 KVA to 320 KVA DG set – ditto- | 3 | Each Job | 35,550 ₹1,06,650 | 6,500 ₹19,500 | 15,000 ₹45,000 | 3,000 ₹9,000 | 2,500 ₹7,500 Lowest | 3,000 ₹9,000 | 2,500 ₹7,500 Lowest |
| 3.00 | Supply only new fuel oil filter elements with 'O' ring for 82.5 KVA to 100 KVA DG set complete all as specified and directed. | 2 | Each set | 1,450 ₹2,900 | 480 ₹960 | 500 ₹1,000 | 500 ₹1,000 | 1,000 ₹2,000 | 500 ₹1,000 | 210 ₹420 Lowest |
| 4.00 | All as per serial item no 3 above but for 225 KVA to 320 KVA DG -ditto- | 3 | Each set | 2,550 ₹7,650 | 1,500 ₹4,500 | 3,000 ₹9,000 | 700 ₹2,100 | 1,500 ₹4,500 | 1,500 ₹4,500 | 570 ₹1,710 Lowest |
| 5.00 | Supply only new lubricant oil filter cartridge element with 'O' ring for 82.5 to 100 KVA DG set complete all as specified and directed. | 2 | Each | 950 ₹1,900 | 450 ₹900 | 500 ₹1,000 | 500 ₹1,000 | 1,000 ₹2,000 | 500 ₹1,000 | 190 ₹380 Lowest |
| 6.00 | All as per serial item no 5 above but for 225 KVA to 320 KVA DG set -ditto- | 3 | Each | 2,550 ₹7,650 | 850 ₹2,550 | 1,500 ₹4,500 | 800 ₹2,400 | 2,000 ₹6,000 | 1,500 ₹4,500 | 610 ₹1,830 Lowest |
| 7.00 | Supply only new air filter (both outer & inner) element with 'O' ring for 82.5 KVA to 100 KVA DG Set complete all as specified and directed | 2 | Each | 1,250 ₹2,500 | 1,485 ₹2,970 | 1,400 ₹2,800 | 1,500 ₹3,000 | 1,500 ₹3,000 | 1,500 ₹3,000 | 890 ₹1,780 Lowest |
| 8.00 | All as per serial item no 7 above but for 225 KVA to 320 KVA DG set – ditto- | 3 | Each | 1,950 ₹5,850 Lowest | 5,850 ₹17,550 | 4,500 ₹13,500 | 3,000 ₹9,000 | 3,500 ₹10,500 | 2,500 ₹7,500 | 3,600 ₹10,800 |
| 9.00 | Supply only of engine oil (15W40 or equivalent.) grade for DG set complete all as specified and directed. | 45 | Litre | 350 ₹15,750 | 210 ₹9,450 | 280 ₹12,600 | 200 ₹9,000 | 250 ₹11,250 | 270 ₹12,150 | 190 ₹8,550 Lowest |
| 10.00 | Supply only Coolant of specific grade for DG set complete all as specified and directed. | 30 | Litre | 300 ₹9,000 | 180 ₹5,400 | 140 ₹4,200 | 150 ₹4,500 | 160 ₹4,800 | 120 ₹3,600 | 90 ₹2,700 Lowest |
Tender Value
₹13.2 L
EMD Value
₹26,400
Closing Date
20 Sept 2025, 6:00 pmClosed
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
REPAIR AND MAINT OF STAND BY DG SETS, CONTROL PANELS, SWITCH AMF PANELS AND OTHER CONNECTED WORKS AT DGRE SECTOR 37 AND HQ TBRL SECTOR 30 CHANDIGARH
2025_MES_727418_1
GE (I) R AND D/CHD-92/2025-26
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹26,400
Yes
22 Jan 2026
23 Aug 2025
22 Sept 2025
23 Aug 2025
20 Sept 2025
6 Sept 2025
Amount
Material and labour for conducting ‘B’ check of DG sets of 82.5 KVA to 100 KVA capacities to carry out maintenance/servicing as given below complete all as specified and directed (i) Change of diesel filter/oil filter, air filter, replacement of engine oil etc. (ii) Check and clean engine, alternator battery, instrument panel, elect panel, timer, contactors, meters and others etc. (iii) Tightening of all nuts & bolts of DG set and its accessories. (iv) Check for any diesel leakage from any point and rectify if observed. (vii) Check electrical connections of engine . The wiring shall be maintained properly and engine starting system from engine instrument panel is to be kept in order. (viii) Check and tighten the AVM pads nuts and bolts, change AVM pads if found damaged , AVM to be provided by contractor. (xiii) Oiling, greasing and checking for proper & smooth functioning and testing on load complete. Note 1. :- Price for minor spare parts like nut bolts, grease, copper conductor cable for control wiring, AVM pads will be included in the quoted rates against each capacity. 2. Price for Major spare parts diesel filter, oil filter, air filter, engine oil and coolant required for replacement will be measured and paid separately under respective item of schedule.
All as per serial item no 1 above but for 225 KVA to 320 KVA DG set – ditto-
Supply only new fuel oil filter elements with 'O' ring for 82.5 KVA to 100 KVA DG set complete all as specified and directed.
All as per serial item no 3 above but for 225 KVA to 320 KVA DG -ditto-
Supply only new lubricant oil filter cartridge element with 'O' ring for 82.5 to 100 KVA DG set complete all as specified and directed.
All as per serial item no 5 above but for 225 KVA to 320 KVA DG set -ditto-
Supply only new air filter (both outer & inner) element with 'O' ring for 82.5 KVA to 100 KVA DG Set complete all as specified and directed
All as per serial item no 7 above but for 225 KVA to 320 KVA DG set – ditto-
Supply only of engine oil (15W40 or equivalent.) grade for DG set complete all as specified and directed.
Supply only Coolant of specific grade for DG set complete all as specified and directed.
Supply only for filling of distilled water for battery complete all as specified and directed.
Supply only diesel exhaust fluid for DG set complete all as specified and directed.
Taking down and dismantling all the components from engine assembly of 82.5 KVA to 100 KVA. Diesel engine, segregating serviceable and semi/unserviceable parts, decarbonisation, cleaning all interior & exterior parts after disconnecting the out-going connection of diesel engine from the panel board, repair /replacement of defective spares and re assembling the DG set after completion of work and make it serviceable complete all as specified and directed. Note: (i) Spare parts/ components measured and paid for separately under relevant items. (ii) Cost of transportation of defective components from site of work to workshop (if any) shall deemed to be included in the unit quoted rate)
All as per serial item no 13 above but for 225 KVA to 320 KVA DG set – ditto-
Repair/re-conditioning of cylinder head (as dismantled under serial item no 13 above) including machine work of 82.5 KVA to 100 KVA DG set complete all as specified and directed.
Repair/re-conditioning of cylinder head (as dismantled under serial item no 14 above) including machine work of 225 KVA to 320 KVA DG set complete all as specified and directed.
Repair/re-conditioning of cooling pump with its all assembly, pipes and clamping ring, engine mounted (as dismantled under serial item no. 13/14 above) including machine work of any capacity complete all as specified and directed.
Repair/overhauling turbo-charger (as dismantled under serial item no. 13/14 above) including repair/replacement of unserviceable spares of any capacity complete all as specified and directed.
Repair/calibration and testing of injectors (as dismantled under serial item no. 13/14 above) of any capacity complete all as specified and directed
Overhauling and testing of governor assembly (as dismantled under serial item no. 13/14 above) of any capacity including machine work complete all as specified and directed.
Material and labour for repair of fuel injection pump/PT pump including dismantling the fuel injection/ PT pump, segregating serviceable and semi/unserviceable parts, replace all unserviceable parts and cleaning serviceable parts, drying, lubricating, re-assembling the FIP/PT pump with cleaned serviceable parts along with new parts as required, calibration, testing complete on computerised testing equipment complete all as specified and directed.
Supply only piston suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed
Supply only cylinder liner suitable for DG engine 82.5 to 100 KVA complete all as specified and directed.
Supply only piston ring set suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only piston pin suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only piston circlips suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only ‘O’ seal ring, first groove suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only ‘O’ seal ring, 2nd & 3rd groove suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only main bearing upper & lower suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only oil seal ring suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only radiator cap suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only thrust bearing suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only inlet/exhaust valve suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only inlet/exhaust valve seat ring suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only valve guide suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only valve collet suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only valve stem cap suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only valve seal suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only washer for cylinder head cover suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only seal ring (rocker arm) suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only water drain cock sub assy suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only front oil seal suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only rear oil seal suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only connecting rod bearing suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only connecting rod bush suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only oil sump washer suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only inlet pipe for feed pump suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only V-belt suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only copper washer suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only HCT switch suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only thermostat Body suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only radiator water inlet hose suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only radiator water outlet hose suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed.
Supply only thermostat element suitable for DG engine 82.5 KVA to 100 KVA complete all as specified and directed
Supply only piston suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed
Supply only cylinder liner suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed
Supply only piston ring set suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only piston pin suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only piston circlips suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only ‘O’ seal ring, first groove suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only ‘O’ seal ring, 2nd & 3rd groove suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only main bearing upper & lower suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only oil seal ring suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only radiator cap suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only thrust bearing suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only inlet/exhaust valve suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only inlet/exhaust valve seat ring suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only valve guide suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only valve collet suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only valve stem cap suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only valve seal suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only washer for cylinder head cover suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only seal ring (rocker arm) suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only water drain cock sub assy suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only front oil seal suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only rear oil seal suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only connecting rod bearing suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only connecting rod bush suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only oil sump washer suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only inlet pipe for feed pump suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only V-belt suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only copper washer suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only HCT switch suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only Thermostat body suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only radiator water inlet hose suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only radiator water outlet hose suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Supply only thermostat element suitable for DG engine 225 KVA to 320 KVA complete all as specified and directed.
Dismantling of self-starter 24V DC by disconnecting battery connection, taking out to civil workshop for carrying out following repair work and refixing including testing complete all as specified and directed (i) Rewinding of armature & field coil. (ii) Replacement of carbon brush and solenoid switch (iii) Replacement of gear assembly.
Dismantling of self-starter 12V DC by disconnecting battery connection, taking out to civil workshop for carrying out following repair work and refixing including testing complete all as specified and directed (i) Rewinding of armature & field coil. (ii) Replacement of carbon brush and solenoid switch (iii) Replacement of gear assembly.
Material and labour for repair of alternator 3 phase 440V of any capacity DG set, including dismantling the alternator from its mounting by unscrewing the nut & bolts. Cleaning the whole assy of alternator, replace the commutator, carbon brush, rectifier, slip rings, slip ring end bearing, drive end bearing etc and re-assembling the all parts and mounted the alternator on its same place and do the connection as previous complete all as specified and directed.
Opening the coupling of DG set of capacity 82.5 to 400 KVA the outer cover and taking out the fly wheel ring and shifting to workshop for repair in and including replacement of fly wheel ring by pressing machine and reinstalled the same after repair to make it fully functional complete all as specified and directed.
Supply and replacement of compact type battery charger unit suitable for charging 01 Bty ,12 V 180 AH complete all as specified and directed with 2m copper leads -02 Nos & brass clamps.
Material and labour for cleaning of diesel tank of DG set of any capacity including replacement of worn out pipe line and measuring scale and fixing in original position and make it leak proof with necessary clamps complete all as specified and directed.
Supply and fixing for battery 12V, 150 AH with 25 Nos Electro plates including battery lead positive & negative battery terminal complete duly charged complete all as specified and directed. Make Exide (Brand: Exide Express) or equivalent.
Supply and fixing for battery 12V, 180 AH with 25 Nos Electro plates including battery lead positive & negative battery terminal complete duly charged complete all as specified and directed. Make Exide (Brand: Exide Express) or equivalent.
Supply and fixing in repair automatic voltage regulator suitable for 82.5 KVA to 100 KVA as per sample complete all as specified and directed.
Supply and fixing in repair automatic voltage regulator suitable for 225 KVA to 320 KVA as per sample complete all as specified and directed.
Repair to existing unserviceable automatic main failure (AMF) panel of any capacity installed at various locations by carrying out the following repair work (a) Disconnecting the incoming power supply and taking out and dismantling the electrical components from the AMF panel of any make and replacement of unserviceable/burn out/defective parts and cleaning/servicing entire interior and exterior serviceable parts and refixing the same in existing position including connections, testing and commissioning etc complete all as specified and directed. Note: (i) Spare/parts shall be measured and paid for separately as "supply only" under respective items here-in-below. (ii) Fixing charge for spare/part, control wiring (copper conductor cable FRLS) of any size, cleaning of panel ,replacement of unserviceable lock and any type welding work used for repair the panel shall deemed to be inclusive under this item.
Supply only MCB, SP, 6-32 amps, 'C' curve suitable for AMF panel complete all as specified and directed.
Supply only MCB, SPN, 6-32 amps, 'C' curve complete all as specified and directed.
Supply only MCB, TPN, 6-32 amps, 'C' curve complete all as specified and directed.
Supply only instrument operating relay, coil voltage 12/24 volts DC suitable for AMF panel complete all as specified and directed.
Supply only 4 pole power contactors Type MCX 43 (400 amp) with suitable coil voltage or equivalent as per site requirement complete all as specified and directed
Supply only 4 pole power contactors Type MCX 33 (200 amp) with suitable coil voltage or equivalent as per site requirement complete all as specified and directed. Make : L & T or equivalent.
Supply only digital multi function meter (KW/KWH/PF/A/V/F) suitable for AMF panel of any capacity complete all as specified and directed.
Supply only current transformer, copper wound suitable for any capacity complete all as specified and directed.
Supply and fixing in replacement MCCB 125 amp 16 KA, 3 pole, adjustable type complete all as specified and directed.
Supply and fixing in replacement MCCB 160 amp 36KA,3 pole, adjustable type complete all as specified and directed.
Supply and fixing in replacement MCCB 200 amp 36KA, 3 pole, adjustable type complete all as specified and directed.
Supply and fixing in replacement MCCB 250 amp 36 KA, 4 pole, adjustable type complete all as specified and directed.
Supply and fixing in replacement MCCB 400 Amp 36KA, 4 pole, adjustable type complete all as specified and directed.
Supply and fixing of On-load type changeover switch 400 amp, 415 volt, with enclosure type complete all as specified and directed. Make: Havells/L&T/BCH/Schneider
Supply and fixing of On-load type changeover switch 250 amp, 415 volt, with enclosure type complete all as specified and directed. Make: Havells/L&T/BCH/Schneider
Supply and fixing of On-load type changeover switch 200 amp, 415 volt, with enclosure type complete all as specified and directed. Make: Havells/L&T/BCH/Schneider
Supply, installation, testing & commissioning AMF panel board for 320 KVA DG set Out- door type, IP- 65 suitable for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 3.0 mm and inner box thickness 2 mm, side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have frame work, bottom frame & 45 CM long four legs of size 50 x 50 x 6 mm Angle iron, including 600 Amp TPN aluminium busbar sleeved with heat shrink sleeve clamour coated for 3 Phase, 4 wire electric supply system and control wiring with minimum size: 1.5 sqmm of copper cable complete comprising of following accessories all as specified and any other items required for smooth functioning of AMF Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge. (Note: AMF panel shall be mounted on PCC 1:2:4 type B-1 (with 20 mm graded stone aggregate) foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC foundation shall be deemed to be included in the unit rate quoted for the item Note:- All type test certificates and design verification with switch gears as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.)
Excavation in trenches not exceeding 1.5 metre wide and n.exc 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in soft/loose soil complete all as specified and as directed by the Engineer in charge.
Returning filling in incl spreading, levelling watering and well ramming in layers not exceeding 25 cm in soft loose soil complete all as specified and as directed by the Engineer in charge.
Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed by the engineer –in- charge.
Supply, laying & testing of LT UG cable XLPE insulated armoured heavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 300 sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed.
Supply and laying double wall corrugated (DWC) HDPE pipe for protection of electrical LT cable in trench/floor of pressure rating 6 kgf/sq-cm with complete all fittings such as bends, short pieces, connectors, caps, plugs, diminishing pieces etc all as per site requirement of size (od & id ) 110x95 mm dia complete all as per specified and directed.
POWER TECH ENGINEERS (BID ID -3423852)
Jai Maa Electrical Works (BID ID -3424399)
TARA ENTERPRISES (BID ID -3429840)
SANJEEV ENTERPRISES (BID ID -3422921)
R N Enterprises (BID ID -3421953)
Pal Engineering Services (BID ID -3431003)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .