Renovation of Toilets in SRP Block and Main Mansion Building (First Floor) at CSIR-CFTRI, Mysuru

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (of upto 3 metre height)

Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling stone ware pipes (exposed/concealed in floor) internal work and taking out the pipes manually/ by mechanical means including staking of pipes within 50 mts lead as per the direction of Engineer-in-charge 75 mm to 150 mm nominal bore.

Dismantling existing IWC/ EWC including stacking serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Making rough of the existing flooring surface by scrapping and using mechanical and means preparing the surface rough for laying flooring tile.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 M sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

15mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 M sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 M sand)

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement : 2 M sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade (Jet black)

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

Providing and laying vitrified tiles in floor in different sizes (Minimum thickness of 10 mm) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement : 4 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified tiles Antiskid finish of size Size of Tile 600x600 mm MAKE: SOMANY/ KAJARIA

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 M sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of tile 300x450 mm Make: KAJARIA/Somany

Providing and fixing factory made PVC door frame made of PVC extruded section of profile size 42X48mm having an overall dimension (tolerance ± 1mm) with wall thickness 2.0mm (± 0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded and 3 nos. staineless steel hinges fixed to the frame for door shutter complete as per manufacturers specification including 24mm thick factory made single/multi panel PVC door shutter reinforced with excellent polymeric reinforcement, shall be water proof, termite proof quality including fixing 2 nos of good quality powder coated aluminium aldrops and 2 nos PVC handles of 150mm length complete as per the manufacturers specification and direction of Engineer-in-charge. (For WC and bath room door shutter) Make : Sintex, Maruthi or its equivalent

Providing and fixing SS towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of apporved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Make: ONIDA or its equivalent

Providing and fixing mirror of superior glass of 5.00mm thickness (of approved quality) and of required shape including necessary fixtures like SS studs, nuts etc. complete Make: Saint Gobian or Modi

Providing and fixing 32mm OD, 220mm long tubular SS handle Make: OCEAN or its equivalent

Providing and Fixing SS soap dish (heavy guage) Make: ONIDA or its equivalent

Providing and fixing high solid strength PVC Soap Dispensor MAKE: ONIDA or its equivalent

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Make : Cera or Hindware

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) P or S trap with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Make : Cera or Hindware

Fixing white vitreous china pedestal type water closet (European type W.C. pan) (P trap or S-Trap) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid European type W.C. pan will be supplied by the Department

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes Make : Ashirwad or its equivalent

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes Make : Ashirwad or its equivalent

Providing, laying and jointing PVC pipes of 6 kgf/ sq.cm pressure capacity including testing of joints etc., complete 110 mm diameter Make: Ashirwad/ FINOLEX

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Make : Cera or Hindwdare Tap : Cera or Hindwdare

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Make : Cera or Hindwdare

Providing and fixing P.V.C waste pipe for sink or wash basin or urinals including P.V.C waste fittings complete. Semi rigid pipe 40 mm dia Make: KOHINOOR, ONIDA or its equivalent

Providing and fixing on wall face PVC moulded fittings/ accessories for SWR rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Door Bend/ T Bend/ Plain Bend 90º 110 mm Make: Ashirwad/ FINOLEX

Providing and fixing CP Coated Brass Angle cock 15 mm Make: ONIDA or its equivalent

Providing and fixing CP coated brass two way bib cock 15mm dia Make: ONIDA or its equivalent

Providing and fixing urinals Make: CERA/ CAPRIANA SKU/ CAT No. : S4020112 (375 x390x 590 mm) or its equivalent

Fxing white vitreous china urinal (Top inlet) with 32mm CP coated brass waste coupling and fixing accessories as per manufacturer specifications complete as per direction of the Engineer-in-charge Material will be supplied by the department

Providing and fixing CP coated brass urinal spreader 15 mm dia Make: ONIDA or its equivalent

Providing and fixing SS coated brass Waste coupling for urinals Make:Onida or its equivalent

Providing and fixing Health faucet Make: VIKING or its equivalent Code: 7216

Providing and fixing CP coated brass short body bib cock Make: Onida or its equivalent

Providing and fixing of SWR nahani trap 100 mm dia including adhesive complete Make: Ashirwad / finolex or its equivalent

Providing and fixing 100 mm SS grating with hole Make: ONIDA or its equivalent

Providing and fixing 100 mm SS grating Make: ONIDA or its equivalent

Providing and fixing brass heavy duty gate valve with approved quality 25 mm nominal bore Make: ONIDA or its equivalent

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore

Providing and fixing C.P shower head 120 mm diameter Make: CERA F7020304 Stainless Steel Over Head Shower or its equivalent

Providing and fixing C.P brass shower arm Make: Cera F7040104 Shower Arm with Wall Flange (Chrome Finished, 305 mm, 12") or its equivalent

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre Make: asian or its equivalent

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic ompound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats Recommended brand: asian/NEROLAC

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Recommended brand: asian/NEROLAC

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead for all lead upto 10 kms including all lifts involved.

NS INFRAS

K S RAVEESH KUMAR