REPAIR, REPLACEMENT OF JOINERY, STEEL WINDOW, VENTILATORS, ALUMINIUM DOOR, ALUMINIUM WINDOW AND ALUMINIUM PARTITION, FALSE CEILING, AC SHEET, RIDGE,

Amount

Dismantling floor, hearth of wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises out of MD land where directed complete all as specified and directed.

M&L for 25mm thick PCC(1:2:4) type B-1(using 20mm graded stone aggregate) as in flooring (sub base, concrete surface finished) even and fair to receive screed of tiles etc complete all as specified and directed.

M&L Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished area of each tile not exceeding 0.36 sqm in floor over 15mm thick screed bedding in cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note:-(Colour,design and pattern shalled be approved by GE(I) Make M/S somany Pikington Limited(Haryana)/Orient/Johnson(India) Private Limited as approved by GE(I).

M&L Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished area of each tile not exceeding 0.36 sqm for work on vertical surfaces such as skirtings, dados and risers to steps etc floor over 10mm thick rendering in cm 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .(Colour,design and pattern shalled be approved by GE(I) Make M/S somany Pikington Limited(Haryana)/Orient/Johnson(India) Private Limited as approved by GE(I).

M&L Glazed ceramic coloured tiles in vertical surface 300x450x 7mm thick set and jointed in neat cement slurry over a 10 mm thick rendering in cm 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . Note:-(Colour,design and pattern shalled be approved by GE(I) Make M/S somany Pikington Limited(Haryana)/Orient/Johnson(India) Private Limited as approved by GE(I).

M&L for non skid ceramic coloured tiles printed 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Granite (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.Note:- Colour of Granite shall be approved by GE(I) R&D

Removal of demolished material from roof /floor etc and disposed off exceeding 250M but not exceeding 500M and deposited where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Taking down cement plaster / dado from brick wall or concerete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finish even and fair with out using extra cement complete all as specified and directed.

Same as item no 9 above but in cm 1:4 on fair faces of brick work or concrete surfaces finish even and fair with out using extra cement complete all as specified and directed.(Water proofing compound shall be measured and paid separately by 2% weight of cement).

M&L Rendering 10mm thick in CM 1:3 in ceiling finished even and smooth without using extra cement complete all as specified and directed.

Supply only waterproofing compound(ISI marked)complete all as specified and directed.

M&L Applying three coat white wash on newaly plastered surface of wall/ceiling in cluding preparatory of surface complete all as specified and directed.

Demolition of PCC in ground floor and paving n exe 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of ceiling boards and wall (fibre insulation, etc or insulation boards any thickness,including cover fillets etc complete all as specified and directed.

S&F Anodised aluminium snap grid 605x605 mm frame work of angle 25mmx25mmx2mm and Main Tee 38mmx25mmx1.5mm for false ceiling complete all as specified and directed.

S&F Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for providing and fixing of 9mm thick PVC laminated Gypsum board inceiling fixed with srews as per manufacturer instructions for any height up to and including 15m complete all as specified and directed.

M&L single side pre laminated Solid PVC Wall Lining consisting of 5mm thick PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing the colour,shade of PVC wall panelling will be as per sample approved by GE(I) and shall be of Rajshree or any other equivalent as approved by GE(I) complete all as specified and directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

Taking down cupboard, partition(wooden /Aluminium) shutters of any description n exe 1 sqm each panel complete all as specified and directed of frame with shutters without taking off shutters from the frame area exe 1.5 sqm but n exe 4 sqm complete all as specified and directed.

M&Lfor fully glazed cupboard with openable shutter having powder coated shall not be less than 50 micron aluminium section of size 50.12x44.45x2mm thick for frame and section for shutters 40x25x1.5mm thick 4.8 mm thick plain/coloured/tinted glass sheet with necessary jointing cleats,glazing clips,rubber packing,aluminium and rubber beading, mortice lock of brass of size 65 mm vertical type four levers , fabricated type including proper fixing of aluminium frame with screw and PVC gully of adequate size as per requirement of size complete all as specified and directed(NOTE-Colour of powder coating will be approved by GE(I).

S&F for 15 micron natural coloured anodised Aluminium section partition partly glazed, partly panalled area of each panel not exceeding one Sqm with section 38mm x63.5mm x 1.5mm including necessary joints clears ,Glazing clips rubber packing screws 4.8mm thick coloured/white/tinted glass on two nos upper panel and 12mm thick preliminated particle board BWA type malamine finish(both side) on bottom panel (0.80mmheight) including necessary filling etc complete all as specified and directed.

Tacking down chowkats or frame with shutter without taking off shutter from the frame area not exceeding 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter without taking off shutter from the frame area exceeding 1.5 sqm but not exc 4.00 Sqm each complete all as specified and directed.

M&L for 15 micron natural colour anodised aluminium section door frame and shutter 101.60mmx44.50mmx3.00mm with tap rail 100.60mmx44.4mmx2.0mm bottom and lock rail 150mmx44.45mmx2.00mm including aluminium snap beading of size 19.05mmx17,27mm necessary jointing cleats glazing clips rubber beeding screw and 4.8mm thick glass plain/tinted/coloured on panel including necessary fitting such as round type handle locking arrangement (mortice lock) complete all as specified and directed. (Floor spring/Hydraulic door closure shall be measured and paid separately)

M&L for 15 micron natural colour anodised Aluminium cum Glazed side hung windows shutter section 50.12mm X 44.45mm X 2.00mm and frame of aluminium section 38.00mm X 63.50mm X1.5mm including Aluminium snap beading of size 19.05mm X 17.27mm necessary jointing glazing clips rubber packing screws and 4.8mm thick plain/tinted/coloured glass etc and necessary fitting aluminium stay 300mm long complete all as specified and directed.

M&L for Aluminium anodised grill for Aluminium window the design size and spacing 65x75 or directed by GE of Aluminium member shall be as per deco grill DG-916, 6mm thick complete all asspecied and directed.

S&F for 15 micron natural coloured anodised Aluminium section ventilator fully glazed with section 38mm x63.5mm x 1.6mm including necessary joints clears ,Glazing clips rubber packing screws 4.8mm thick coloured/white/tinted glass etc complete all as specified and directed.

M&L for Extruded aluminium alloy handles 125mm size, fabricated type,anodised complete all as specified and directed.

M&L for Butt hinges in 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

M&L for Aluminium anodised in 150mm in size, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for Aluminium anodised in 100mm in size, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Demolition of reinforced cement concrete not exceeding 15 cm thickness, below or above ground level of any description complete all as specified and directed.

M&L for RCC work in 1:2:4 type B1 using 20mm graded stone aggregate as in slabs, supported on walls, beams and coloumns in floor, roof, landing and in shelves for slaps and the like complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Demolition of Brick work built in cement morter as in drains etc complete all specified and directed.

M&L brick work old size with subclass 'B' brick, straight or curved on plan exc.6m mean radius built in cement morter1:6 complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complerte all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L Door closer hydraulically regulated Aluminium (Die cast body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed to door complete all as specified and directed.

M&L for paradise vertical blinds standards 100mm width made of cotton fabric with following accessories as mentioned below: (a) HEADRAIL: Extruded anodised high strength aluminium alloy section with wall thickness of 1.2mm . (b) CONTROL UNIT: Made of derlin (Celon), it consists of tilting control which rotates the louvers and the traverse cord moves on pulleys in the control unit for stacking. (c) CARRIERS: Moulded of derlin (Celon) with an anti-friction additive. It consists of a housing with wheels, upper bevel gear matching lower gear,louver holding stem with a hanger book and keeper to match the hole in the top of the louver. (d) TILTER : Nickle plated brass/steel ball chain. It tilts the louver to any desired angle upto 180o and holds them at that angle. (e) TRAVERSE CORD: Braided of high strength polyster fibre, It is flexible, has minimum stretch and maximum abrasion resistance. (f) TILT ROD: Extruded hard aluminium alloy with three/four equally spaced keyways for operation of carrier gear. (h) INSTALLATION BRACKET: Made from galvanised steel of 10 gauge fitted with pressure clips made of spring steel to hold the headrail. (j) BOTTOM MECHANISM : (i) Bottom Weight made from galvanised steel sheets and is powder coated for maximum corrosion resistance. It is inserted in the louver to keep it straigh (ii) Bottom chain of brass/steel nickle plated of 2 mm with equally spaced 'clear clips' fitted on it, It is attached to bottom weight, to maintain the louver spacing. FABRIC LOUVERS: Fabric woven from polyster fibres.Protective coating and fusion with chemicals is done for stain resistance and soil repellancy. (k) Fabric colour, EI 2124 and EC 1110 or any other colour as approved by GE(I).

M& L for 35 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both faces complete all as specified and directed.

S&F in repair MS sliding door bolts 300 mm long bolt type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F in repair butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F for Steel ventilator with top hunge shutter including hinges, steel peg stay, complete all as specified and directed.

Supply and fixing 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane all as specified and as directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete.

M&L preparation of newly steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of newly wood surface and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

M&L Pre-painted semi corrugated galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified comlpete all as specified and directed.

J.P. ENTERPRISES