CERTAIN REPAIR/ REPLACEMENT OF JOINERY, PLUMBING, FLOORING, WALL PANELING, PVC FALSE CEILING, FOOTHPATH AND OTHER MISC B/R WORKS AT JAK LI RC UNDER GE 970 EWS.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work complete all as specified and directed by Engr-in-Charge.

M&L for PVC 5 to 6mm thick hollow PVC Ceiling as in flat surface including all fixing viz, U and L as design and pattern, including Gl frame work as flat surface approved as in ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel at 457mm center to center fixed with hanger of Gl channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and directed by Engr-in-Charge.

M&L for PVC 8 to 9mm thick hollow PVC Ceiling as in curved, sunken or raised surface of any design as approved including all fixing viz, U and L as design and pattern, inlcuding GI frame work for curved, sunken or raised for any design as approved as in ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel at 457mm center to center fixed with hanger of Gl channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and directed by Engr-in-Charge. Note :- Flat area will be measured.

Supply & fixing PVC 5 to 6mm thick hollow PVC wall panelling including all fixing viz, U and L as design and pattern including all necessary framed works as per manufacturers instruction, make and design as approved by GE complete all as specified and directed

S&F for Wooden deorative timber wall panelling with wood planks 12mm thick 2nd class softwood with tounge & grooved wooden panels and edges tongued and grooved or rebated fixed with gun screws/nails, design as approved by GE, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified.

M&L Joint free Non-skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and as directed

M&L Joint free Non-skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and as directed

M&L Joint free Non-skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.

M & L 15 mm rendering on fair faces of brick work or concrete surface in cement mortar 1:4 to receive tiles complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 450 x300x7 mm 450 x350 x7mm thick set and jointed in neat cement slurry and pointed in while or colour cement to match the tiles all as spd and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level).

M&L 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough complete all as specified and as directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern (glossy finish) as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Taking up or down GI Water Tubing/PPR pipes 15/16mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed.

M&L for 3-layer PP-R (Polypropylene random copolymer) outer diameter of pipes 20 mm (Inner dia 14.40 mm) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

S&F in repair 15mm dia bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete.

S&F in repair brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete .

S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified .

S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed.

S&F PVC waste pipe 32mm dia of cup with over all length of pipe 90cm complete all as specified and directed.

S&F PVC urinal waste pipe 50 mm dia of cup with screw and over all length of pipe 90cm complete all as specified and directed.

S&F Peg Set of 6 with base plate stainless steel complete all as specified by Engr-in-Charge.

Supply & Fixing Corner Glass Shelf 300mm (with ABS Brackets) complete all as specified by Engr-in-Charge.

S&F Brass CP Sink Mixer with regular spout for mixing hot & cold water screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified

Supply& Fixing tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified.

S&F in repair vitreous China squatting pan, Orissa pattern incl PVC trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in cement concrete (1 cement, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

S&F Vitreous China wash downwater closet pan (pedestal pattern), white (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed by Engineer-in-Charge

S&F one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed by Engr-in-Charge

Supply & fixing PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

Supply & Fixing vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

S&F Vitreous China Urinal, full stall type, including, urinal spreader, waste coupling and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe complete all as specified and as directed.

S&F in repair PVC Connections 600mm long complete all as specified.

S&F in repair Aluminium Grip (Hot & Cold) connections pipe for Basin Mixer/Geyser/Hot and Cold connection pipe Hose Pipe of length 600mm long fixed, complete all as specified and as directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete..

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (The unit rate quoted by contractor includes cost of glass & wiremesh and all other connected accessories Net opening will be measured for payment purpose.)

S&F 35 mm thick, factory made 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as directed.

S&F 35mm thick plain, frame 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers all as spd.

S&F solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing Sintex Polycon and equivalent complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.all as specified and directed.

Material & labour Three Track powder coated anodised aluminum frame and shutters for windows and ventilators with for anodised aluminium shutters for windows and ventilators with for anodised aluminium shutter two Nos fully glazed 5.5 mm thick tinted or plain glass with one No shutter having stainless steel mosquito proofing net 0.63 mm dia with 1.40 mm aperature with and including necessary rubber packing aluminium beading and necessary locking arrangement and powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified and directed. Sections of window shall be aluminium sections as follows:- (a) Three track frame bottom and top section 92 mm x 31.75 mm x 1.3 mm thick with weight 1.065 KG per RM. (b) Three track frame bottom and top section 92 mm x 31.75 mm x 1.3 mm thick with weight 0.929 KG per RM. (c) Shutter bottom and top 40 mm x 18 mm x 1.55 mm thick with weight 0.547 Kg per RM. (d) Shutter sides 40 mm x 18 mm x 1.55 mm thick with weight 0.547 Kg per RM. NOTE: (i) The rates shall be inclusive of supply & fixing of rubber packing / gasket, SS wire mesh & glass pane of suitable size and all necessary arrangemetn to fixing frame with brick wall / concrete surface. (ii) The rates shall be inclusive to make good the damage portion of brick wall / concrete surface with PCC 1:3:6 & CM (1:3) to match with existing surface.

S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

S & F aluminium handle, cast type anodized 150mm size.

S & F 150 mm long aluminium anodized barrel tower bolts of extruded section lcomplete all as specified and as directed.

Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum

Please Enable Macros to View BoQ information