8293 REPAIR TO JOINERY, ROLLING SHUTTER, SUNKEN TREATMENT AND FLOORING AND CERTAIN E/M WORK AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

B/R WORKS Taking down Chowkhats or frames n.exc 1.5 Sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed.

Description same as above but size exc 1.50 sqm and n.exc 4.00 sqm

Taking down shutters of any description n.exc 1 Sqm each and removing from site complete all as specified and directed.

Description same as above but size exc 1 Sqm and n. exc 2 Sqm each.

Taking down shutters exceeding 1.0 Sqm and not exceeding 2 Sqm and refixing the same opening after modification if any complete all as specified and directed.

Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed.

Material and labour factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications complete all as specified and directed.

Supply and fixing Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Supply and fixing Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffener & supplying & fixing in frame at site as per specifications & drawing

Material and labour Flush door shutters, 30mm thick, solid core construction, with both faces is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

Material and labour for 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to Chowkhats of 2nd class Hard Wood 35mm thickness complete all as specified and directed.

Supply and fixing glazed or gauged shutter 35 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) all as per specified and as directed.

Supply and fixing glazed or gauged shutter 30 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (b) all as per specified and as directed.

Material and labour for Plain, solid, straight Chowkhats and frames in 2nd class hardwood , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with additional rebates for fixing second shutter complete all as specified and as directed

Supply and fixing stainless steel butt hinges medium weight 100mm long complete all as specified and as directed

Supply and fixing in repairs stainless steel butt hinges medium weight 100mm long complete all as specified and as directed

Supply and fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and as directed

Supply and fixing in repairs Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and as directed

Supply and fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 75mm long complete all as specified and as directed

Supply and fixing in repairs Butt hinges, medium weight, cold rolled mild steel, and fixed 75mm long complete all as specified and as directed

Supplying and fixing aluminium anodised barrel tower bolts of extruded section 150 mm complete all as specified and as directed

Supplying and fixing in repairs aluminium anodised barrel tower bolts of extruded section 150 mm complete all as specified and as directed

Supplying and fixing aluminium anodised barrel tower bolts of extruded section 100 mm complete all as specified and as directed

Supplying and fixing in repairs aluminium anodised barrel tower bolts of extruded section 100 mm complete all as specified and as directed

Supplying and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and as directed

Supplying and fixing in repairs Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and as directed

Supplying and fixing Extruded aluminium handles fabricated type anodised 100mm long complete all as specified and as directed

Supplying and fixing in repairs Extruded aluminium handles fabricated type anodised 100mm long complete all as specified and as directed

Material and labour for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and as directed

Supply and fixing in repairs for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and as directed

Supply and fixing in repairs rubber door seal/snake guard with 25mm wide aluminium strip fixed at bottom of door to prevention from snakes/insects as per sample complete all as specified and as directed.

Supply and fixing 140mm/150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Supply and fixing in repairs 140mm/150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Material and labour for applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of surfaces complete all as specified and as directed

Supply and fixing in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium, wire staple complete all as specified and as directed

Supply and fixing aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium, wire staple complete all as specified and as directed

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed

Supply and fixing sheet glass ordinary quality 3mm thick in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed

Material and labour Powder coated Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

Material and labour Powder coated aluminium door shutters, aluminium section weighing not less than 1 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified.

Material and labour Powder coated aluminium ventilators shutters, side hung type or top hung without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified.

Material and labour Powder coated aluminium windows shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified.

Material and labour sheet glass ordinary quality and glazing 5mm thick with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Material and labour for 5mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed

Supply and fixing for 12mm thick weather proof prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in aluminium frame work complete all as specified and as directed.

Supply and fixing in repairs 100mm Hasp and staple, safety type, anodised aluminum with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

Supply and fixing in repair 20mm dia curtain rails, aluminium anodised with fixing brackets, stops, rollers etc. complete all as specified and as directed

Supply and fixing in repairs anodised aluminium alloy Harrison rails along with vertical venetian blind complete with all its accessories like brackets, stops, roller including fixed to wall with screws complete all as specified and directed by Engr-in-Charge

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified.

Material and labour for pre-laminated particle board 18mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and fixing in repairs of stainless steel Handle fancy type 100 mm size complete all as specified and directed.

Supply and fixing in repairs of stainless steel hinge of size 65 mm self closing Italian patter suitable for cabinet and shelves opening / closing operation (fancy type) complete all as specified and directed

Material and labour for PVC edge lipping, 3/4mm thick fixed with nails for 18/19 mm thick pre-laminated particle board & shutters & etc, all as specified and as directed.

Supply & Fixing in repairs of Magnet of suitable size fixed for cabin leafs, drawers etc,complete all as specified and as directed Make : Royal

Supply & Fixing stainless steel roller of size 25mm x 12mm, male female rolling brackets suitable for baskets complete all as specified and directed , Make : Ever shine

Material and labour for servicing of modular kitchen cabinets including taking down baskets and refixing in the same opening complete all as specified and as directed

Supply and fixing in repairs of Designer Stainless steel baskets of any type and any size of length n.exc 750mm and depth n.exc 500mm and height n.exc 200mm complete all as specified and as directed

Repair and servicing of rolling shutters including taking down (excluding lath profile) and removal of worn out components such as ball bearing, helical wire spring, lock plate, shafts rods, locks and straightening/ replacing of existing guide channels hood cover and bracket plate with angle iron frame etc., as required including cutting, welding, greasing and servicing for smooth functioning and replacing the parts for rolling shutters of size upto 6 Sqm complete all as specified and as directed. Note : supply only spare parts shall be measured and paid separately .

All as per item No-61 hereinbefore but exc 6Sqm and n. exc 10 Sqm complete all as specified and as directed

Supply only 300 mm long helical wire spring 2 gauge complete all as specified and as directed

Supply only wheel bearing of size 40 mm (inner dia) complete all as specified and as directed

Supply only hood cover of 1.00mm thickness MS sheet, bent to shape as hexagonal square or circular contour stiffened with angle/flat at top & bottom etc complete all as specified and directed.

Material and labour for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide, primer exceeding 10cm in width or girth not otherwise described complete all as specified and as directed.

Providing & Fixing of Minerals fiber acoustic suspended ceiling system with fine fissured tiles with Silhouette exposed grid, the tile should have humidity resistance (RH) of 99%, NRC upto 0.6, light reflectance 85%, thermal conductivity (K) 0.052 to 0.057 w/m, colour white, fire performance class O/class 1 (BS476 part 6&7) in module size of 600 x 600 x 16 mm thick with Bio block coating on the face of the tile, impact resistant and suitable for green building application with recycled content of 37%. The tile shall be laid on silhouette profile grid system with 15mm white/black colour and with web height of 38mm and load carrying capacity of minimum 11.68 kg/sqm. Silhouette main runner and cross tees to gave mitred ends and birds mouth notches to provide mitred cruciform junction. The "T" sections have galvanizing 0f 120 gms/sqm and passed through 500 hrs of salt test, the tile and grid system used together should carry a 15 year warrantee, including dismantling of wall & ceiling boards (fibre, pulp, insulation etc.,) or insulation board/slab/blankets. any thickness, including cover fillets complete all as specified and directed. Make: Armstrong/Saint Gobain

E/M WORKS

Taking down carefully copper/aluminium point wiring (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc.

Point wiring with two single core 1100 V grade FRLSH insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor FRLSH drawn through and including rigid PVC conduit and conduit accessories including concealed wiring including breaking of walls and making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi-stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for light/ fan/ Bell etc.

All as per item No. 70 here-in-before but for One 3 pin 5 Amps switch socket combination, independent board with other switches, with cables 1.5 Sqmm size.

All as per item No. 70 here-in-before but for One 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size.

All as per item No 70 but with PVC conduit and conduit accessories including fixing in surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for light/ fan/ Bell etc.

All as per item No. 70 here-in-before but for One 3 pin 5 Amps switch socket combination, independent board with other switches, with cables 1.5 Sqmm size.

All as per item No. 70 here-in-before but for One 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size.

All as per item No 70 but drawn through existing PVC conduit and making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for light/ fan/ Bell etc.

All as per item No. 76 here-in-before but for One 3 pin 5 Amps switch socket combination, independent board with other switches, with cables 1.5 Sqmm size.

All as per item No. 76 here-in-before but for One 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size.

All as per Item No. 70 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable and 2.5 Sqmm FRLSH copper earth wire cable drawn through PVC conduit including provision of conduit and conduit accessories on surface for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.

All as per Item No. 70 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable concealed and make good disturbed surfaces and 2.5 Sqmm FRLSH copper earth wire cable drawn through 20 mm dia PVC conduit including provision of conduit and conduit accessories for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.

All as per Item No. 70 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable existing conduit and make good disturbed surfaces and 2.5 Sqmm FRLSH copper earth wire cable for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.

Taking down carefully sub main wiring of any description including batten / PVC conduit pipe on surface and making good disturbed surfaces to match existing all as specified and as directed.

M&L sub main wiring with two single core 1100 V grade conforming to IS 694 PVC insulated unsheathed cables 6 Sq mm FRLSH multi stranded copper conductor drawn through and incl 25 mm dia non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm FRLSH copper wire earth continuity conductor etc complete all as specified and directed by Engr-in-Charge. Note : Three runs of 6 sqmm cable with one run of PVC conduit shall be measured as one run.

Supply and Fix in repairs Switch Piano, flush type, Single Pole, 230 Volts, AC, one-way 5 Amps with ISI mark complete all as specified and directed.

Supply & Fix in repairs Switch socket outlet, multipurpose, flush type, 3/5 Pin,AC, 230 Volts, 5 Amps complete all as specified and directed.

Supply & Fix in repairs switch socket outlet, multipurpose, flush type, 5 in 1, 5/16Amps, AC, 230 Volts, complete all as specified and directed.

S & F in repairs Bell push, AC, 230 V flush type single pole, complete all as specified and directed.

Supply and Fix in repairs DING DONG bell AC 240 V single pole 50 Hz and connecting up complete all as specified and directed.

S&F in repairs electronic type fan regulator step type complete all as specified and directed.

Supply and Fix in repairs Ceiling rose 3 terminals, surface Bakelite 65 x 50mm complete all as specified and directed.

Supply and Fix in repairs Sheet metal enclosures for DBs single pole 8 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and directed.

Supply and Fix in repairs Sheet metal enclosures, double door, MCB DB, 4 way, TPN, AC 415 Volts complete all as specified and directed.

Supply and Fix in repairs MCB FP, AC 415 Volts 40/63 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and Fix in repairs MCB DP, AC 240 Volts 32 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and Fix in repairs MCB SP 240 V, 6A to 32 Amps 10KA, 50Hz 'C' curve 10KA, 50Hz 'C' curve complete all as specified and directed.

S & F wall mounted LED 20 watts, batten type fitting for surface and pendant application, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver with connector block etc complete with all accessories internally pre wired and necessary mounting arrangements with 02 nos PVC block and connection from ceiling rose to fitting complete including dismantling the existing unserviceable fitting, complete all as specified and as directed.

Supply and fix LED energy saving surface mounted decorative oval bulk head light comprising of high brightness 10W, 6000K LEDs complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fix in repairs LED light fitting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including 02 Nos PVC blocks complete all as specified and as directed.

Supply and fix in repairs LED square light luminaries fitting surface mounted type 15 W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fix in repairs LED Security light fitting 15 W LED (1800 Lumen) complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary bracket complete all as specified and as directed.

Supply and Fix in repairs batten holder (angle / straight), two pin type suitable for self ballast LED lamps screwed with round block including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fix in repairs LED inverter T-LED bulb 20 W, 2 pin, B 22 type Cool daylight, 8hrs charging time, 4hrs back-up time complete all specified and as directed.

Supply and fix in repairs Flame retardant material plastic surface box 1/2 module with front plate for housing switch/ socket complete all specified and as directed. Make :HAVELLS/ INDOASIAN/ANCHOR

Taking down geyser of any make/ type and any capacity after disconnecting the water and electric line connections from any height, bringing down to floor, dismantling the Geyser and overhauling by means of repair/replacement of the defective spares, cleaning externally and internally re-assembling the geyser, fixing in same position and testing for satisfactory working etc complete. Note: Replacement of defective spares shall be measured and paid under relevant item separately.

Supply only Neon lamp indicator (Green and Red)

Supply only Bottom flange with inlet and outlet pipe (Apparatus plate)

Supply only Thermostat conforming to IS 3017

Supply only Flexible connection pipe set of two for cold and hot water

Supply only Heating element 2.0 KW

Taking down ceiling fan 1200mm/1400mm sweep from any height and bringing down to floor, dismantling the ceiling fan and overhauling by means of replacing defective ball bearing, bushes, split pins, grease, packing, winding and cleaning externally, re-assembling the ceiling fan and checking, refixing in its position complete all as specified and directed.

All as per item No.110 but for exhaust fan 300/350 mm including replacing of rusted nut and bolts complete all as specified and directed.

Supply and Fixing modular switch 1 way 6 amps one module complete all as specified and as directed.

Supply and Fixing modular switch 1 way 16 amps 1 module after removing the unserviceable switch.

Supply and Fixing modular socket 6A 2/3 pin combined 2 module after removing the unserviceable switch.

Supply and Fixing modular socket 6A / 16A - 2/3 pin combined 2 module after removing the unserviceable switch.

Supply and Fixing modular fan step regulator 120W - 2 module after removing the unserviceable switch.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store and refixing after greasing and cleaning and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Taking down carefully Light fitting any type for reuse at same place including keeping in safe custody upto refixing, including refixing light fitting in same position complete connecting from ceiling rose to fitting with 2 core copper flexible cable/conductor all as per specified and directed by Engr-in-Charge.

Supply and fix capacitor 2.5 mfd suitable for ceiling fan complete all as specified and directed.

CHANDRASEKRAN ENTERPRISES

Vinayaga constructions

AnnaiEnterprises

KRA Engineering and Construction

VVM CONSTRUCTIONS

JR ENTERPRISES

sri manikandan enterprises