ADDN /ALTN OF PATIENTS MECHANICAL LAUNDRY (BLDG NO P-363) AT INHS DHANVANTARI AND PROVN OF RAIN WATER PROTECTION SHED OVER THE HOSPITAL RAMP AND CO LOCATED STAIR CASE (BLDG NO - P-165) AT INHS DHANVATARI UNDER GE MINNIEBAY, PORT BLAIR

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and as directed

Returning filling in soil including spreading levelling, watering & well ramming in layers n. exe 25cm complete all as specified and as directed

Removing surplus soil not exc 50mtr and depositing where directed at a level not exc 1.50mtr above the starting points complete all as specified and as directed

M&L for PCC type D2 1:4:8 using 40 mm graded stone aggregate in foundations,filling and mass concrete complete all as specified and as directed

M&L for providing PCC (1:2:4) type, B-0 using 12.5 mm graded stone aggregate as in padding and similar work complete all as specified and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams, and similar work for rough finished flat surfaces.

All as per item No 6.00 above but in columns complete all as specified and as directed

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns, and stanchions and similar work for rough finished flat surfaces complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed

M&L for Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

M&L for RCC type B1 1:2:4 (nominal mix) using 20mm graded stone aggregate as in foundation including footing plinth beam, base for column, etc complete complete all as specified and as directed.

All as per item No 12.00 abov but in columns pillars, posts, struts, piers,complete all as specified and as directed

All as per item No 12.00 above but in lintel/ roof beams etc complete all as specified and as directed.

Demolition of Precast Concrete work/ precast concreteblock built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering to concrete or block masonry surfaces on fair faces 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar 1:4 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and smooth without using extra cement complete incl taking down all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Supply only liquid water proofing compound ISI marked

M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed

M&L for complete removal and preparation of old plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper paint over a coat of alkali resistant primer including application of wall care putty all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper paint over a coat of alkali resistant primer including application of wall care putty all as specified and directed.

S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, Medium Grade of any dia complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any guage thickness or similar pattern roof coverings complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

S&F aluminium flat 40 x 6mm / 25 x 6mm size as wind tie fixed with 50mm/75mm aluminium self tapping screws complete all as specified and as directed.

M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demoliton of cement concrete in floors and pavings n exc 15 cm thickness (above or below GL) complete all as specified and as directed.

M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarseetc complete all as specified and as directed.

M&L for coloured non skid /matt finish ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic tiles 450x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:4) all as specified and directed

M&L for non-skid heavy duty ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed of 15mm thick in CM 1:4 all as specified and as directed.

S&F 605 x 605mm anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed.

S&F hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L 4mm thick decorative Non asbestos perforated fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminium framework with screws including preparation of surfaces and applying two coats of oil emulsion distemper complete all as specified and as directed.

Taking down existing chowkats or frames n.exc. 1.5 Sqm each without taking off shutters from the frames.

Taking down existing chowkats exc. 1.5 Sqm and n.exc. 4 Sqm each without taking off shutter from the frame.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube, fixing in openings as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing

S&F Powder coated Aluminium frames for Partition, Door, Windows ,sliding shutters and Ventilators with one or more rebates incl jointing cleat for fixing etc and aluminium anodised skelton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section incl necessary Aluminium grill, jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified incl aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame all as specified and directed NOTE: (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of 5mm thick glass etc. (ii) Supply only 5mm thick sheet glass and aluminium wire cloth be measured and paid separately. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose .

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply only 4mm Plain glass ordinary quality ,in square exc0.5 sqm each complete all as specified and as directed.

S&F in 18/19 mm thick pre-laminated HDF particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and similar items complete all as specified and as directed.

S&F in 12 mm thick pre-laminated HDF particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and similar items complete all as specified and as directed.

S&F Aluminium anodised XPM 1.50mm x3.00mmsize for mosquito poroofing 22 gauge thick complete all as specified and as directed.

Taking up or down old/chocked water tubings 15mm bore with fittings from trenches /walls complete all as specified and as directed.

Taking up or down old/chocked water tubings 20mm bore with fittings from trenches /walls complete all as specified and as directed.

Taking up or down old/chocked water tubings 25/30mm bore with fittings from trenches /walls complete all as specified and as directed.

S&F 20mm outer dia CPVC pipes of pressure rating 10kgf/cm2 fixed complete to walls ,ceiling s or in floors etc complete all as specified and as directed. .

S&F 25mm outer dia CPVC pipes of pressure rating 10kgf/cm2 fixed complete to walls ,ceiling s or in floors etc complete all as specified and as directed.

S&F 20mm outer dia CPVC pipes brass Elbow complete all as specified and as directed.

S&F 20mm outer dia CPVC pipes brass Elbow(3/4 X1/2) complete all as specified and as directed.

S&F 20mm outer dia CPVC female brass adoptor (FTA/FBTA) complete all as specified and as directed.

S&F 25 mm outer dia CPVC female brass adoptor(FTA/FBTA) complete all as specified and as directed.

S&F 20 mm outer dia Brass Tee complete all as specified and as directed.

S&F 20mm outer dia tank adaptor complete all as specified and as directed.

S&F 25 mm outer dia tank Adaptor complete all as specified and as directed.

S&F 20mm outer dia union complete all as specified and as directed.

S&F 25 mm outer dia tank Adaptor complete all as specified and as directed.

S&F Gun metal gate valves with iron wheel head screwed both ends for iron pipe of dia 25mm complete all as specified and as directed.

M&L for type B1 1:2:4 using 20mm graded stone aggregate providing, precast cement concrete as in kitchen slab/shelves etc. all as specified and directed

M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over 15mm thick screed in CM (1:6) complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Supply only stainless steel friction stay hinges of standard size.

Supply only standard aluminium window handles 125 mm long for Alu. windows/ ventilators

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complet all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long complet all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 125mm long complet all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150mm long complet all as specified and as directed.

S&F steel butt hinges with ,bright polished 100 mm long ISI marked fixed with brass screws complet all as specified and as directed.

S & F Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S & F curtain Rod / Harrison rails, stainless steel with fixing brackets, stops, rollers etc , 25 mm dia with fixing brackets, stops, rollers etc complete all as specified and as directed.

S&F vitreous china counter top wash hand basin, white colour of size 480X370X130mm including fixing on granite slab 32 mm waste coupling brass chromium plated suitable for was hand basin with long screw shank and fly nuts & PVC waste pipe complete all as specified and as directed.

S & F Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore, etc complete all as specified and as directed.

S & F Angular cock 15 mm dia, cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specified and as directed.

S & F Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in brass chromium plated telescopic Hand shower(Health Faucet) (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook all as specified

S&F brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

S & F Soap Dish, Vitreous China, White of approximate size 160 x 160 x 90 mm with screws complete all as specified and as directed.

S&F in PVC waste pipe for Sink/WHB of 32/40mm dia 600mm long complet all as specified and as directed..

S&F in Grab bar 18" of length complet all as specified and as directed.

S&F in repairs vitreous china wash basin, white flat back of size 550mm x400mm, excluding tap incl bracket complete all as specified and as directed.

S&F 15mm Pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complet all as specified and as directed.

S&F Vitreous China wash down water closet pan 'P' trap or 'S' Trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl connecting to drain pipe and flush pipe etc complete all as specified and as directed.

S & F 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

S&F Vitreous China urinals, half stall type ,white (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F PVC flexible connection, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank etc, all as specified.

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down complet all as specified and as directed.

S & F in 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

S & F in 110 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

S & F in 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

Cutting into existing manholes for connecting new drains internal dia of pipe 150mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering complet all as specified and as directed.

S&F 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors.

M & L for 150 mm thick Concrete bed type D2 (1:4:8) using 40mm graded stone aggregat to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in (for 150 mm pipes ) complet all as specified and as directed.

M&L for PCC 1:3:6 type D2 using 40mm graded aggregate as in foundation, filling & mass concrete.

M&L Cement concrete type B2 1:2:4 using 20mm graded aggregate in surface channels, drains ,Manholes all as specified and as directed

M&L for setting coat 3mm thick, trowelled to even and smooth finish in CM 1:4 all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for complet all as specified and as directed.

S&F Roof trusses (framed), trusssed, purlings, crane gantries, rails and fasternings and heavy breacket frasming (Beam,tee,angle,Channel or flat sections) including distance pieces, cleates etc.of grade Fe 410-w grade E-250 quality A complet all as specified and as directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complet all as specified and as directed.

M&L for taking down existing water proofing treatment of any description and layers from wall/roofs including screed bed or bedding layers of mortar of any complete and cleaning the surfaces free from dust and scrubbing down with water complete all as specified and clearing the premises all as directed

M&L for 10 mm average thickness of Plaster on RCC roof slab with CM ( 1:4 ) including water proofing compound @ 3% by weight of cement shall be caried out as specified all as specfied and directed Note : WPC shall be measured and paid separatly

M&L for preparing plastered surfaces,and aplying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg/Sqm over a coat of bituminious primer @0.3kg/sqm all as specified

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding cutting/opening for new pipe necessary clamps etc to fixing on walls as required all as specified.

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed

S&F 110 mm bore PVC (SWR) junction single (Single 'T') equal or unequal with access door complete all as specified and as directed .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-matallic rigid PVC conduit PVC conduit fittings and conduit asccessorries concealed in walls, roofs and floors etc or on the wall including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronic fan regulator including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continmuity conductor and connecting to common earth dolly all as specified for:-

One light point controlled by one switch

One Wall fan point controlled by one switch and one fan regulator

One switch socket outlet 3 pin 5 Amps on independent board

One switch socket outlet 3 pin 5 Amps on same board

One Exhaust Fan point controlled by one Switch

All as per item 113.00 above but with 4 Sqmm copper conductor cable with 4.0 sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board all as directed.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv wiring all as specified and directed.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 4.0 sqmm including one run of 4.0 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv wiring all as specified and directed.

S&F in repairs LED type well glass aluminium hosing ceiling light of 30 W with hanging facility with excelent thermal management IP66 and having efficiency 110Lm/w complete all as specified and as directed

Taking down old unserviceable ceiling fan and and exhaust fan and deposited to AGE E/M-I store yard complete all as specified and as directed

S&F 450 mm sweep air circulator of 5 star rating, energy saving model with double ball bearing 230 volts 3 blades white in colour without regulator all as directed

S&F Exhaust fan, 300 mm sweep, minimum 1250 RPM, AC, single phase, 240 volts, with louvers complete and connecting up from ceiling rose to fan by three core 1.5 sq mm copper wire of suitable capacity including suitble size MS bolts and nuts for fixing exhaust fan and louvers including making opening in brick walls/stone walls suitable for fixing exhaust fans and making good to the disturbed surfces to match with the existing by applying PCC, putty, white washing/colouring complete all as specified and directed.

S&F Sheet steel factory made double door, powder coated MCB DB with bus bar 400 Amps,Neutral link, Earth bar, double door type TPN (4+4+4) out going) Way 415 Volt, MCCB/MCB as a Incomer complete all as directed

S&F sheet steel factory made double door, powder coated MCB DB with bus bar 200 Amps,Neutral link, Earth bar, double door type SPN 8 Way 415 Volt, MCCB/MCB as a Incomer complete all as directed

S&F MCB four pole, 40 Apms ,36KA breaking capacity,440volts, 50Hz, including necessary incoming and outgoing electric connection with suitable size of copper lugs etc complete all as specified and as directed

S & F MCB SPN, 20-32 Amps, C series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs complete all as specified and as directed

S & F MCB SP 6 to 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS-8828, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed

S&F in repairs LED type tube light fittings 4 feet long 1x20 W 230V ,decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate envoirnmental friendly, energy efficient tube light life time 40,000 burning Hrs, lumen output 2000lm, complete & prewired for LED tube complete fixed to wall / Ceiling by suitable downrods, PVC round blocks and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including 1x20W LED tube complete all as specified.

S & F switch piano one way 6 A, one module all as specified and as directed.

S & F Fan regulator step type 100 watts, one module complete all as specified and as directed

S & F switch piano one way 15 A, one module all as specified and as directed.

S&F socket outlet multipurpose 3 pin, 16 amp and one pin, 6 amps 2 in 1 flush type universel for Power all as specified and as directed.

S&F socket outlet multipurpose 3 pin, 6 amp flush type universel for Power all as specified and as directed.

S&F ceiling rose surface bakelite 65mm x 50 mm two to three terminals all as directed.

ANDAMAN PAINTS PVT LTD

S S CONSTRUCTION