CERTAIN B/R REPAIR AND SERVICE INCLUDING COMPREHENSIVE REPAIR/MAINT INTERNAL WIRING, MODULAR FITTING AND FIXTURE FOR POCKET A, B, C, AND H UNDER GE (NORTH) AKHNOOOR

Amount

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed.

Description all as per item No.02 above, but except bricks, all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified.

Taking down cement plaster of any description on stone or brick walls etc. including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or cement concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5mm thick cement plaster with cement mortar(1:4) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified and as directed.

Repair to roof projection/chajjas/facia incl soffit of chajjas by taking down old rendering and providing 15mm thick rendering in CM 1:4 including making edges and corners smooth and rounded including necessary formwork and scaffolding work up to height of 7.0m complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Applying 2mm thick wall care putty over newly plastered / old plastered surfaces of wall, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper including one coat of alkali resistant primer complete all as specified and as directed.

Preparation of previously plastered or unplastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed.

Preparation of old painted surfaces by washing, rubbing down and stopping of distempered or painted walls and applying one coat of cement base paint white or tined, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

40mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring including finishing the top surface even & smooth, using extra cement complete all as specified .

50mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in bays with mastic filling in joints complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tiles exceeding 0.11 Sqm but n.exceeding 0.18sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement laid over & including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

Description all as per srl item No 21 above but as in skirting over & including 10 mm thick plaster in cement and sand mortar 1:4, complete all as specified and directed.

Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick back coat layer plaster in cement mortar 1:4, complete all as specified and directed.

Plain cement concrete type B-0 1:2:4 (12.5mm graded aggregate) 25mm thick as in levelling course complete all as specified and as directed.

Vitrified ceramic tiles(Light shade)10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors/skirting etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade including 15mm thick screed bed/base in cement and sand mortar 1:6, complete all as specified.

Description all as per srl item No 25 above but as in skirting over & including 10 mm thick plaster in cement and sand mortar 1:4, complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons,walls etc, complete all as specified and directed.

20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed. Note:-(Size of Kota Stone slab shall be 52 cm x 52 cm).

-Ditto- All as per item No 28 above but in skirting/dado fixed over and including 10mm thick plaster in CM (1:4), complete all as specified and directed.

20 mm thick makrana white marble as in border/cooking platform etc, bedded and jointed over 20mm thick screed in cement mortar 1:6 including pointing in white cement 1:2 using marble dust including cutting and polishing complete all as specified and as directed.

20mm thick granite work (table rubbed and polished) as in cooking platform etc, bedded and jointed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite complete all as specified and directed.

Dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed.

Dismantling timber scantlings (framed work) 40 Sqcm and over in section, in any position complete all as specified and as directed.

Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W(Gde E-250), quality 'A' complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa s in roof covering/cladding to wall, valley gutter, ridge & similar works fixed with self tapping screws complete all as specified and as directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets GI framework complete all as specified and directed.

GI frame work with size of grid 605mm x 605mm for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including celing section (n.exc 1.2m length) of 0.55mm thickness having kruled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 centre to centre with support of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and including 4mm thick Non asbestos fibre cement designer type building board of size 600mmX 600mm fixed or laid/inserted to GI/Aluminium framework with screws complete all as specified and directed.

Restraining,resecuring including making good of loose/disturbed GI snap grid ceiling frame work incl carefully taking down ceiling board and refixing/fixing new one in position if required, complete all as specified and directed. Note:-Supply only ceiling board required for replacement if any shall be measured & paid under relevant item.

Supply only 4mm thick prelaminated designer ceiling board (excluding framework) all as specified.

Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'S' trap fixed in repairs complete all as specified and as directed. Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make specified in list of makes as approved by GE.

Vitreous china wash down water closet pan pedestal pattern in white colour excluding seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed. Cat Part No-20011 (SLICK) of Hindware or equivalent cat part of make specified in list make as approved by GE.

PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified and as directed.

Vitreous china Urinal, Half stall type, white ( excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe fixed in repairs all as specified.

Vitreous china wash basin, white, flat back, size 550x400mm with full pedestal with & including CP basin mixer including waste pipe porcelain stopper a pair of CI brackets fixed in repair complete all as specified and as directed by Engineer-in-Charge. Cat Part No-10100 of Hindware for Wash basin or its equivalent make as specified in apprioved by GE.

Brass chromium plated shower roses 125mm with or without swivel joints, including fixing to steel pipe or union fixed in repairs all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts on both ends of length 450mm

Stainless steel gratings 100/125mm dia fixed with cement motar fixed in repairs, complete all as specified and as directed.

Waste pipe for WHB/Urinal for 32/40mm fixed in repairs, complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.

Description all as per item No. 51 above but 20 mm bore.

15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified and as directed.

Description all as per item No 53 above but 20mm bore.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed.

Description all as per item No.55 above but 20 mm bore.

Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm fixed in repairs, complete all as specified and as directed.

Bib taps15mm, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm fixed in repairs, complete all as specified and as directed.

Pillar taps 15mm cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore.fixed in repairs, complete all as specified and as directed.

Health faucet with one mtr long flexible tube and wall hook chromium plated screwed down for iron pipe fixed in repairs, complete all as specified and as directed.

Plastic water closet seat cover white closed pattern with flat bottom and cover including chromium plated hinges device fixed in repairs, complete all as specified and as directed.

Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) fixed and repairs complete all as specified and directed.

20 mm dia bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe fixed in repairs complete all as specified and directed.

Brass chromium plated fancy type wall mixture for mixing hot and cold water supply screwed down incl connecting leg & wall flange for iron pipe 15mm bore fixed in repairs all as specified and directed

Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) 3 layer hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) 3 layer hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down of shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each complete all as specified and as directed.

Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed.

Pressed steel frames for doors with one or more rebates of size 125x60mm including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh hold bar complete all as specified and as directed.

Pressed steel frames for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh hold bar complete all as specified and as directed.

Plain Cement Concrete 1:3:6 type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame complete all as specified and directed.

PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate for hold fast blocks, including necessary form work, complete all as specified.

35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified.

35mm thick 2nd class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc devided into square with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed.

Factory made solid panel PVC door shutter/ cupboard shutter/ kitchen cabinets 30mm thick style wooden texture consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed.

Aluminium powder coated sliding window, chowkat of size 63mm x 40 mm x 1.3 mm thick with aluminium powder coated two track frame of size 63 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thickscrewed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed.

Aluminium powder coated sliding window, chowkat of size 92mm x 40 mm x 1.3 mm thick with aluminium powder coated three track frame of size 92 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thick screwed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed.

Powder coated aluminium door/ partition sections with standard aluminium sections for frame work, for glazed shutters, partitions, ventilators with one or more rebates including joiining cleats, aluminium beadings etc for fixing etc. complete all as specified.

Powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m (glass & wire mess shall be measured and paid separetely) including necessary joining cleats, glazing rubber packing, anodised aluminium clips, snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 N.) and 100 mm long aluminium tower bolt (02Nos) per shutters complete all as specified.

Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.

150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed by Engineer-in-Charge.

Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed by Engineer-in-Charge.

Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width , ISI marked fixed in repairs, complete all as specified and as directed.

Aluminium mortic lock (4 levers) 100 mm long vertical type fixed in repairs, complete all as specified and as directed.

300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, fixed in repairs complete all as specified and as directed.

25 mm dia stainless curtain road complete with stainless bracket and side caps fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screw fixed in repairs, complete all as specified and as directed.

Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & glazed shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 . Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid seperately under respective item

Description all as per Item No.92 above, but only fixed glass pane shutter without glazing bars.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

3 mm thick sheet glass figured (frosted), ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer, complete all as specified and as directed.

Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of Ist quality over a coat of pink primer,complete, all as specified.

Preparation of old steel surfaces of any description exc 10 cm width or girth, and applying one coats of synthetic enamel paint complete all as specified and directed.

Preparation of old wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth, and appying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down eaves gutters and PVC(SWR) pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

110 mm dia PVC (SWR) Type-B pipes single socketed in any length with rubber ring joint laid in trenches or in floor all as specified and directed.

110 mm dia PVC (SWR) Type-B pipes single socketed in any length with rubber ring joint fixed to wall with PVC//MS holder clamp all as specified and directed.

75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joint laid intrenches or in floor all as specified and directed

75mm bore PVC SWR Type-B pipes single socket in any length with rubber joint fixed to wall with PVC//MS holder clamp etc complete all as specified and as directed

PVC SWR reducer 110mm to 75 mm complete all as specified and as directed,

PVC SWR vent cowl 75 mm complete all as specified and as directed.

PVC (SWR) bend 110 mm dia any radius all as specified and directed

PVC (SWR) junction single (single T) equal or unequal provided with access door 110 mm dia all as specified and directed

PVC (SWR) bend 75 mm dia any radius all as specified and directed

PVC (SWR) 75 mm dia floor trap plain with grating including jointing with solvent cement fixed in repairs, all as specified and directed

PVC (SWR) junction single (single T) equal or unequal 75 mm dia all as specified and directed

Steel rolling shutters of 01 mm thick laths, without ball bearing with complete push pull or manual system incl safety lever lock with four levers as specified including top cover, anchoring rod, hasp and staple and one shop coat primer erected in position as indicated fixed as in repair, complete all as specified and directed.

Steel rolling shutters of 01 mm thick laths, without ball bearing gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple erected in position as indicated fixed as in repair, complete all as specified and directed.

Oiling and greasing of rolling shutter of any size and pattern including scrubbing down old gresing complete all as specified and directed irrespective of width area n.exc 10Sqm each.

Taking down aluminium door shutter of any size / any description and making functional by way of repair/replacement of floor spring, hinges, lock, rubber packing etc as required and refixing in position of same opening, complete all as specified and directed.

Sunken Floor treatment :- Providing and laying of water proofing treatment to sunken portion including vertical portion by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound of make as specified and approved including demolition and filling of sunken floor with & including PCC 1:5:10 type E-2 (using 40mm brick aggregate). (a) First layer of slurry of cement @0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours. (b) Second layer of slurry of cement @0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/Sqm. This layer allowed to air cure for 4 Hours. (c) 15mm thick plaster in CM 1:3 mixed with WP compound to be provided while concrete is still green. (d) Joint of/Trap/WC/Soil pipes shall be properly sealed with sealing compound. Note:(a) Concrete for sunken slabs shall be mixed with WP compounds as per manufacturer's instructions. Before carrying out water proofing treatment the sunken slab shall be tested with water for 48 hours for any leakage /dampness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested before passing for next stage. (The rate quoted includes water proofing compound as per manufacturers instructions). (b) Please note that only floor area shall be measured for payment purpose.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.

Taking down old unserviceable sub main wiring and supply and fixing Sub main wiring complete with 2 runs of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLS type, PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLS type as earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with existing surface including taking down of old existing submain cable complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers shall be deemed in to included in quoted rate only.)

All as per item No-124 above but for One light point/fan /bell point controlled by one switch.

All as per item No-124 here-in-before but for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per item No-124 here-in-before but for One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

Material and labour for point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 2.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers shall be deemed in to included in quoted rate only.)

Ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

Modular type switch 6 Amps, single pole, 1way,1 module, 240V, ISI Marked Complete all as specified and approved.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and fixing modular type switch 16 Amps, single pole 1 way, 1 module, 240 V, ISI marked complete all as specified an directed.

Supply & fixing modular type socket shuttered type 6 Amps- 2/3 Pin combined 2 module,240V,AC ISI Marked Complete all as specified and directed. Make crabtree,Havells, or its equivalent at specified in list of makes.

Supply & fixing modular type socket 6 A/16 Amps -2/3 Pin combined shuttered socket 2 module 240V AC ISI Marked Complete all as specified and directed Make Crabtree, Havells or its equivalent at specified in list of makes.

Fan regulator modular type electronic compatible with BLDC fan, stepped type 100 Watts, 2 module 240Volts, AC ISI marked complete all as specified and directed. “Cat part No:- Crabtree (Havells) or its equivalent cat part of make as specified in list of makes in P.S.

Electric bell ding dong type 230 volts AC supply 50 Hz complete all as specified and directed.

Modular Bell push 6A 1 module, 240V, ISI Marked Complete all as specified and directed. “Cat part No ACVSBXW061 of Crabtree (Havells) or its equivalent cat part of make as specified in list of makes in P.S..

LED lamp retrofit type 12 watt B22 base holder with polycarbonate body and heat sink type fixed in repairs complete all as specified and directed.

LED light fitting 1x10W, 220V, Bulk head luminaries including LED driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make- Havell Cat part No-RUGBYGENXFTS10WLED865SSYMBOPC or equivalent of Make-Phillips, Crompton, wipro, bajaj as approved.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V Integrated surface mounted box type LED fitting including connecting up with three core flexible copper conductor cable of suitable size complete incl testing after fixing all as specified and directed.

LED light fitting 1x20W, 220V, Integrated surface mounted box type LED fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as approved by GE complete all as specified and directed.

25 Watt LED energy saving light fitting in replacement environment friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 with GI bracket made of light grade GI pipe 40 mm dia of 1.2 mtr long bend to shape with 02 Nos of FI clamp 32 x 4mm with suitable size nuts, bolts, washers etc. and making the connection from ceiling rose to fitting with suitable size twin core copper conductor cable complete all as specified and directed. Cat Part No LR26-251-XXX-65-XX of Wipro or its equivalent in Havells, Philips, Bajaj, Surya, Crompton as approved.

Supply & fixing and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 8 way for flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 200Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 36 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand cat Part No. 5076 21 8 way / Hager cat Part No.VYS08G / L&T Cat Part No:-DBSPN008GD as approved

MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked fixed in repairs complete all as specified and directed. Make:- Legrand cat No.4085 87 to 4085 95 / Hager Cat Ref No.NCN106N to NCN132N / Havells Cat No.DHMGCSPF006-032 as approved

MCB single pole & neutral 40 to 63 amps 240 volts 10 KA 'C' series fixed in repair, complete all as specified. Make:-Havells cat part No-DHMGCSPF040or its equivalent cat part of make-Legrand / ABB / L&T as approved by GE

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging, blanking plates where required testing and commissioning in replacement, complete all as specified. Make:- Havells cat part No-DHDPSHODPW12 or its Equivalent cat part of make of Legrand / ABB / L&T as approved by GE.

Ceiling fans complete with blades, down rods, and accessories, 230 volt, 1200mm sweep, min air delievery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) including taking down old Unserviceable ceiling fans and depositing the same in MES Store Yard complete all as specified and directed. Make:- Cat Part No Zinger of Make Havells or its Equivalent cat part of make as specified in list of make here- in after.

Vertical double door enclosure factory made TPN in replacement fitted with bus bar neutral link, blanking plates of 4 way (4+12) with suitable for incomming MCCB 4 pole 'I/C' frame,having isolated neutral bar, mechanical impact strength IK09, door earthing suitable for MCCB upto 125 Amp, complete all as specified and as directed

MCCB 63 Amps, 4 Pole, 415 Volts, 50 Hz, 16 KA fixed thermal & fixed magnetic, complete all as specified and directed.

M/S KARAN SINGH CONTRACTOR (BID ID -3058173)

M/s Vishwakarma Enterprises (BID ID -3058307)

PACHNANDA BUILDERS (BID ID -3066304)

CHOPRA CONSTRUCTIONS (BID ID -3058376)