REPAIR/RECANNING AND POLISHING OF CERTAIN STEEL FURNITURE UNDER GE GUWAHATI

Amount

REPAIR TO ALMIRAH LARGE STEEL (DRG NO FD 351/1031)

M&L for removing dents and bends and welding wherever required for Almirah Large Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of almirah large steel complete(inside and outside) with a coat of synthetic enamel paint as approved by Engr-in-charge Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Almirah as a whole shall be measured as one unit. Make for Paint :- Asian (Apcolite)/Nerolac/Berger

M&L replacement of old lock with new one providing new locks 7 lever Godrej pattern best quality as approved with duplicate stainless steel key. Make for Lock :- Godrej/ Sheel/Harrison/Link

M&L replacement of old 3 way locking device with new one best quality as approved Make:- As approved by Engr-in-Charge

M&L for removing old /unserviceable legs and S & F of new Legs made out of 1.5 mm PBI sheet to the required shape as per drawing duly welded at the bottom of the frame by removing old rusted unserviceable leg and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces. Make for Sheet:- Rinl/Sail/Tisco

S&F Handle steel chromium plated 100mm size with nut and washer by removing of old unserviceable handle, nut and washers. Make:- Godrej or Equivalent as approved by Engr-in-Charge

REPAIR TO ALMIRAH MEDIUM STEEL (DRG NO FD 243/1032)

M&L for removing dents and bends and welding wherever required for Almirah Medium Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of almirah Medium steel complete(inside and outside) with a coat of synthetic enamel paint as approved by Engr-in-charge Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Almirah as a whole shall be measured as one unit. Make for Paint :- Asian (Apcolite)/Nerolac/Berger

M&L replacement of old lock with new one providing new locks 7 lever Godrej pattern best quality as approved with duplicate stainless steel key. Make for Lock :- Godrej/Sheel/Harrison

M&L replacement of old 3 way locking device with new one best quality as approved Make:- As approved by Engr-in-Charge

M&L for removing old /unserviceable legs and S & F of new Legs made out of 1.5 mm PBI sheet to the required shape as per drawing duly welded at the bottom of the frame by removing old rusted unserviceable leg and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces. Make for Sheet:- Rinl/Sail/Tisco

S&F Handle steel chromium plated 100mm size with nut and washer by removing of old unserviceable handle, nut and washers.Make:- Godrej or Equivalent as approved by Engr-in-Charge

REPAIR TO LOCKER STEEL (DRG NO FD 257/1029)

M&L for removing dents and bends and welding wherever required for Locker Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of Locker steel complete(inside and outside) with a coat of synthetic enamel paint as approved by Engr-in-charge Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Locker as a whole shall be measured as one unit. Make for Paint :- Asian (Apcolite)/Nerolac/Berger

S&F Hasp and staple chromium plated 100 mm long after removing of old unserviceable Hasp and staples all as specified on drawing and as directed by Engr-in-Charge Make:- As approved by Engr-in-Charge

S&F Handles, steel chromium plated 100mm long after removing of old unserviceable handle as shown on drawing and as directed by Engr-in-Charge Make:- Godrej or Equivalent as approved by Engr-in-Charge

Removing of old unserviceable conduit pipe and supply & fixing of new conduit pipe of same size Chromium plated steel conduit 19 mm dia with 1.60mm wall thickness & shall be provided with bracket all as specified on drawing and as directed by Engr-in-Charge Make:- As approved by Engr-in-Charge

REPAIR TO TABLE OFFICE CLERK (DRG NO FD 381/1004)

(a) M&L for removing dents and bends and welding wherever required for Table office clerk Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office clerk steel complete(inside and outside) with a coat of synthetic enamel paint as approved by Engr-in-charge Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Table as a whole shall be measured as one unit. Make for Paint :- Asian (Apcolite)/Nerolac/Berger

Removing of old unserviceable locks and supply and fix new brass locks with duplicate keys best quality. Make for Lock :- Godrej/Sheel/Harrison

Removing old unserviceable Top and supply and supply and fixing of new top made out of pre laminated particle board 18 mm exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing. Make of particle Board:- Eco Board/Bhutan Bd/Novapan

REPAIR TO TABLE OFFICE OFFICER STEEL (DRG NO FD 84 (M) /1003 /1002)

(a) M&L for removing dents and bends and welding wherever required for Table office clerk Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office clerk steel complete(inside and outside) with a coat of synthetic enamel paint as approved by Engr-in-charge Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Table as a whole shall be measured as one unit. Make for Paint :- Asian (Apcolite)/Nerolac/Berger

Removing of old unserviceable locks and supply and fix new brass locks with duplicate keys best quality. Make for Lock :- Godrej/Sheel/Harrison

Removing old unserviceable Top and supply and supply and fixing of new top made out of pre laminated particle board 18 mm exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing. Make of particle Board:- Eco Board/Bhutan Bd/Novapan

REPAIR TO CHAIR VERANDAH (FD -19 M/FD-359)

Re-canning of chair verandah after removing the existing cane and to carry out necessary welding and repairs wherever required and painted with two coats of synthetic enamel paint over a coat of primer and weaving with new white plastic cane of approved quality with 3.5 to 4mm wide half round type for seat and back and fixing 04 Nos of hard rubber shoe/PVC shoes for legs of 20 mm dia after removal of old existing /unserviceable shoes all as shown on drawing and as directed by Engr-in-Charge. Note:- Cane shall be of plastic strips of superior quality ,type -I HDPE white or cream colour of uniform width conforming to IS-5387 Make of Cane :- M/s Maharasthra Plastic Industries /India Plastic/ Shah & Shah, Make for Paint :- Asian (Apcolite)/Nerolac/ Berger

REPAIR TO TEAPOY VARANDAH (FD-255)

Removing old unserviceable Top and supply and supply and fixing of new top made out of pre laminated particle board 18 mm exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing. Make of particle Board:- Eco Board/Bhutan Bd/Novapan

M&L for removing existing paint and preparing the surface after applying putty and a coat of primer and Painting of Teapoy verandah with two coats of synthetic enamel paint (1st grade quality) white colour with glossy finish by spray machine and Supply and Fix of new hard rubber/PVC shoes after removing existing old/unserviceable shoes complete as specified and shown on drawing and as directed by Engr-In-Charge Make for Paint :- Asian (Apcolite)/Nerolac/Berger

REPAIR TO CHARPOY GI PIPE (FD-220)

Removing of following existing unserviceable long rail of charpoy carefully and S& F of new long rail including tightening of joints , placing every part in tact as per drawing and as directed by Engr-in-Charge Make:- Jindal/Zenith/Swastik

Removing of following existing unserviceable short rail of charpoy carefully and S& F of new short rail retrived out of unserviceable/replaced long rails including tightening of joints , placing every part in tact as per drawing and as directed by Engr-in-Charge

Removing of following existing unserviceable legs of charpoy carefully and S& F of new leg retrived out of unserviceable/replaced short rails including tightening of joints , placing every part in tact as per drawing and as directed by Engr-in-Charge.

Removing of following existing unserviceable GI medium grade 3 way elbow of charpoy carefully and S& F of new elbow ISI marked including tightening of joints , placing every part in tact as per drawing and as directed by Engr-in-Charge.

Removing of following existing unserviceable check nut of charpoy carefully and S& F of new 5 mm checknut suitable for GI 32 mm medium grade pipe including tightening of joints , placing every part in tact as per drawing and as directed by Engr-in-Charge.

Removing the existing unserviceable plytop and S& F of new 12 mm thick BWR plywood exterior grade quality including flush headed bolts and nuts with washers for fixing plywood to charpoy and spot welding wherever required. Plywood edges to be smoothened and corners rounded complete as specified and as directed by Engr-in-Charge. Note:- Tightening of existing frame after replacement of parts as mentioned in item 8.01 to 8.05 included in this item before replacing of plywood. Make:- Kitply/Century Ply/ Archid Ply

REPAIR TO CHARPOY MS SQ TUBE PLY TOP FD/MAP/11/01

Removing of old paint and preparing surface by applying putty and one coat of red oxide after welding wherever required(legs/rails) and applying two coats of synthetic enamel paint black colour to match as per standard drawing including removing existing rubber shoes and S& F of Hard rubber shoes ( 4 Nos) for each charpoy and as directed by Engr-In-Charge Make for Paint :- Asian (Apcolite)/Nerolac/Berger

Removing of old/unserviceable Ply top from Charpoy MS Sqr Tube & S&F of new 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers as specified and directed by Engr -In-Charge Make:- Kitply/Century Ply/ Archid Ply

CHARPOY DOUBLE DECKER CWE/SHL/20

Removing old/unserviceable Ply top from Charpoy Double deckers and S&F of new 12mm thick BWR plywood of exterior grade and fixing the same specified and directed by Engr -In-Charge. Note :- Each plywood shall be measured as one unit .Make:- Kitply/Century Ply/ Archid Ply

REPAIR TO BOOK CASE STEEL LARGE (FD-1028) 1/1

M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Case Steel Large complete as specified and directe by Engr-in-Charge . Make for Paint :- Asian Apcolite)/Nerolac/Berger

M&L for removing unserviceable/broken existing glass and S& F of new 5 mm thick glass and fitting with 1 mm MS sheet channel with roller for sliding doors all as specified in drwaing and as directed By Engr-in-Charge Make :- Modiguard/Saint Gobain/Kohinoor

S&F Handles, steel chromium plated 100mm long after removing of old unserviceable handle as shown on drawing and as directed. Make:- Godrej or Equivalent as approved by Engr-in-Charge

REPAIR OF BOOK SHELF OPEN LARGE STEEL FD-69 (M)

M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Shelf Open Large complete as specified and directe by Engr-in-Charge .Make for Paint :- Asian (Apcolite)/Nerolac/ Berger

REPAIR OF BOOK SHELF OPEN SMALL STEEL FD-69 (M)

M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Shelf Open Small complete as specified and directe by Engr-in-Charge Make for Paint :- Asian Apcolite)/Nerolac/Berger

REPAIR TO HOT FOOD TROLLY S/S ELECT DRG NO TP/KALRA

M&L for removing old unserviceable stainless steel body and S & F of new stainless steel 1.00 mm thick ISI marked of standard quality for Hot Food Trolley S/S Elect as specified in drawing and as directed by Engr-in-Charge

M&L for removing old unserviceable base revolving wheels /casters & S &F of new base revolving collapsible rubber wheels for Hot Food Trolly S/S Elect and as specified on drawing and as directed by Engr-in-Charge

M&L for removing of old unserviceable doors & racks & S& F of new doors & racks made out of 1 mm thick stainless steel of standard quality ISI marked & movable refrigerator type racks as specified on drawing and as directed by Engr-in-Charge.

M&L for removing of old unserviceable bowl cover and S& F of new bowl cover made of stainless steel of standard quality ISI marked and as specified on drawing and directed by Engr-in-Charge .

M&L for removing old/unserviceable electrical fittings and S& F of new fittings (Thermostat, Indicator Lamp, 3 Pin Top 15 Amp and point wiring with multi stranded copper conductor cable in PVC casing and capping including PVC insulated cable and others) and fixing with the same with screws nuts and bolts as shown on drawing and as directed by Engr-in-Charge .

M&L for removing old/unserviceable Gate valve(Brass) and GI Waste Pipe and S& F of new ones as per existing size and shape and as directed by Engr-in-Charge .

REPAIR TO BED HARD STEEL (FD/E6/MAP/08)

Removing of old paint and preparing surface by applying putty and one coat of red oxide after welding wherever required(legs/rails) and applying two coats of synthetic enamel paint black colour to match as per standard drawing and as directed by Engr-In-Charge Make for Paint :- Asian Apcolite)/Nerolac/Berger

Removing of old/unserviceable Ply top from Bed Hard Steel & S&F of new 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers including S& F of new hard rubber shoes ( 4 Nos ) for each bed after removing the existing ones and as specified and directed by Engr -In-Charge Make:- Kitply/Century Ply/ Archid Ply

REPAIR TO CHAIR COMPUTER (FD/E6/MAP/01 / T/P)

M&L for removing the old unserviceable back of Chair Computer & S&F of new back of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam designed with contour lumber support for extra comfort with PVC lipping all around as specified and shown on drawing and as directed by Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing the old unserviceable Seat of Chair Computer & S&F of new Seat of same size / 510x470x60 mm made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam designed with contour lumber support for extra comfort with PVC lipping all around as specified and shown on drawing and as directed by Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing the old unserviceable Handles / Arm rest of Chair Computer & S&F of new Handles of same size shape made of black integral skin polyurethane reenforced with MS insert as specified and shown on drawing and as directed by Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing old unserviceable pedestal assy and supply and fixing of new pedestal assy injection along with hydraulic and fitted into each prong for holding castors of same size and shape as specified in drawing and as directed by Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing old unserviceable castors and supply and fixing of twin castors of 50mm dia and overall breadth 50 mm of same size and shape as specified in drawing and as directed by Engr-in-Charge Make:- as approved by Engr-in-Charge

REPAIR TO CHAIR REVOLVING HIGH / LOW BACK OFFICERS (TRADE PATTERN)

M&L for removing the old unserviceable back of Chair Revolving & S&F of new back of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam designed with contour lumber support for extra comfort with PVC lipping as per sample approved all around as specified and as directed by Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing the old unserviceable Seat of Chair Revolving & S&F of new Seat of same size / 510x470x60 mm made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam designed with contour lumber support for extra comfort with PVC lipping all around as per sample approved as specified and as directed Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing the old unserviceable Handles of Chair Revolving & S&F of new Handles of same size shape made of black integral skin polyurethane reenforced with MS insert and shall be back fixed to the rail with screws 4mm thick alongwith washers as per sample approved as specified and as directed Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing old unserviceable pedestal assy and supply and fixing of new pedestal assy injection along with hydraulic and fitted into each prong for holding castors of same size and shape as per sample approved as specified and as directed Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing old unserviceable castors and supply and fixing of twin castors of 50mm dia and overall breadth 50 mm of same size and shape as per sample approved as specified and as directed Engr-in-Charge Make:- as approved by Engr-in-Charge

REPAIR TO CHAIR WRITING STEEL MAP /CHAIR VISITOR (FD/E6/MAP/01 / TP)

M&L for removing the old unserviceable back of Chair Writing Steel / Chair Visitor & S&F of new back of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50 mm thickness with PVC lipping all around along with welding of of mettallic rail structure where required and shall be fixed to the rail with screws 4mm thick alongwith washers as per sample approved as specified and as directed by Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing the old unserviceable seat of Chair Writing Steel / Chair Visitor & S&F of new seat of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50 mm thickness with PVC lipping all around along with welding of of mettallic rail structure where required and shall be fixed to the rail with screws 4mm thick alongwith washers as per sample approved as specified and as directed by Engr-in-Charge Make:- as approved by Engr-in-Charge

M&L for removing the old unserviceable handle / armrest of Chair Writing Steel / Chair Visitor & S&F of new handle of same size made of black integral skin polyurethane with reinforced MS insert and shall be back fixed to the rail with screws 4mm thick alongwith washers as per sample approved as specified and as directed by Engr-in-Charge Make:- as approved by Engr-in-Charge

REPAIR TO RACK STEEL SIX TIERS FD-1038

M&L for removing dents and bends and existing paint and preparing surface by applying putty and a coat of red primer and applying a coat of Synthetic Enamel paint of Olive Green colour or any other colour as specified and as directed by Engr-in-Charge. Make for Paint :- Asian (Apcolite)/Nerolac/Berger/Shalimar Paints

CHAIR CB STEEL WITH ARMS FD_75 (M)

Removing the existinmg unserviceabvle seat and back from chair , S&F and Welding of 04 Nos MS Flat Angle(02 Each) on seat and (02 Each) on back as directed by Engr-in-Charge and fixing it with moulded cushion Density 30 and tapestry cloth .Seat and Back to be supported by 6 mm thick BWR plywood exterior grade (beneath cushion) and fixed with GI Bolts and nuts 6mm dia and 45 mm long with washers , 8 holes per chair .Scrapping existing old painted surface and with chemical/aerosal spray . Preperation of chair surfaces after applyimg putty and red oxide primer and spray painting of chair with two coats of synthetic enamel paint of Black Colour.Removing existing arms and S&F of new PVC moulded arms (02 Arms each chair) complete as specified and as directed by Engr-in-Charge. Make of Plywood:- Kitply/Century Ply/ Archid Ply, Make of Tapestry Cloth :- Bombay Dyeing/ Raymonds/ Dedecor, Make of Cushion:- Sleepwell/Kurlon/Dunlop Note :-PVC Arms and colour of Tapestry cloth as per sample approved by Engr-in-Charge Note:- Each Chair Shall be measured as one unit

CHAIR CB STEEL WITHOUT ARMS FD_75 (M)

Removing the existinmg unserviceabvle seat from chair , S&F and Welding of 04 Nos MS Flat Angle(02 Each) on seat and (02 Each) on back as directed by Engr-in-Charge and fixing it with moulded cushion Density 30 and tapestry cloth .Seat and Back to be supported by 6 mm thick BWR plywood exterior grade (beneath cushion) and fixed with GI Bolts and nuts 6mm dia and 45 mm long with washers , 8 holes per chair .Scrapping existing old painted surface and with chemical/aerosal spray . Preperation of chair surfaces after applyimg putty and red oxide primer and spray painting of chair with two coats of synthetic enamel paint of Black Colour complete as specified and as directed by Engr-in-Charge. Make of Plywood:- Kitply/Century Ply/ Archid Ply, Make of Tapestry Cloth :- Bombay Dyeing/ Raymonds/Dedecor, Make of Cushion:- Sleepwell/Kurlon/Dunlop, Note :-PVC Arms and colour of Tapestry cloth as per sample approved by Engr-in-Charge Note:- Each Chair Shall be measured as one unit

M/S K Nath and co