Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.8 LAdmitted-Finance | ₹21.8 L | L1 | Admitted-Finance |
| 2 | L2₹22.3 LAdmitted-Finance | ₹22.3 L | L2 | Admitted-Finance |
| 3 | L3₹22.3 LAdmitted-Finance | ₹22.3 L | L3 | Admitted-Finance |
| 4 | L4₹24.0 LAdmitted-Finance | ₹24.0 L | L4 | Admitted-Finance |
| 5 | L5₹24.2 LAdmitted-Finance | ₹24.2 L | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S JASWINDER SINGH L6 | AMIT SHARMA L1 | satvir Singh L5 | Balbir Singh L3 | VIJAY KUMAR GUPTA L4 | GURDEEP SINGH L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 Sq. m on plan), including dressing of sides & remaining of bottoms , lift upto 1.5 m , including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50 m | |||||||||
| 1.10 | All kinds of soil. | 5 | Cum | 200 ₹1,000 | 200 ₹1,000 | 200 ₹1,000 | 200 ₹1,000 | 95 ₹475 | 100 ₹500 |
| 2.00 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared | 885.22 | sqm | 14 ₹12,393.08 | 6 ₹5,311.32 | 8 ₹7,081.76 | 8 ₹7,081.76 | 30 ₹26,556.60 | 15 ₹13,278.30 |
| 3.00Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. | |||||||||
| 3.10 | 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) | 2 | Cum | 3,000 ₹6,000 | 2,900 ₹5,800 | 3,000 ₹6,000 | 3,000 ₹6,000 | 2,000 ₹4,000 | 1,800 ₹3,600 |
| 3.20 | 1:3:6 (1 Cement : 3 coarse sand(zone-III) : 6 graded stone aggregate 20 mm nominal size). | 8 | Cum | 3,600 ₹28,800 | 3,700 ₹29,600 | 3,300 ₹26,400 | 3,300 ₹26,400 | 5,000 ₹40,000 | 3,200 ₹25,600 |
| 4.00 | Making plinth protection 50 mm thick of cement concrete 1: 3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well ramed and consolidated and grouted with fine sand including finishing the top smooth | 55.27 | Sqm | 300 ₹16,581 | 345 ₹19,068.15 | 450 ₹24,871.50 | 450 ₹24,871.50 | 360 ₹19,897.20 | 200 ₹11,054 |
| 5.00Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level | |||||||||
| 5.10 | 1:1½:3 (1 cement : 1½ coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size) | 2 | cum | 6,000 ₹12,000 | 5,400 ₹10,800 | 6,300 ₹12,600 | 6,300 ₹12,600 | 5,400 ₹10,800 | 4,800 ₹9,600 |
| 6.00Reinforced cement concrete work in walls (any thickness). Including attached pillasters, buttresses, plinth and string courses fillets columns, pillers, piers, abutments, posts and struts etc. upto floor 5 level exclusing cost of centring shuttering, finishing and reinforcement. | |||||||||
Updated dates
Tender Value
₹29.1 L
EMD Value
₹58,100
Closing Date
12 Jan 2026, 4:00 pmClosed
Estates Officer, SKUAST-Jammu
Estates Division, SKUAST-J, Main Campus, Chatha
Upgradation by way of Repair Renovation to the Directors Residence at Main Campus, Chatha
2025_SKUST_298456_2
AU/Estates/2025-26/21 dated 16-12-2025
Open Tender
Civil Works
180 days
Main Campus, Chatha
Please refer tender documents
4 documents required · 4 mandatory
₹1,000
Assistant Comptroller (Estates), SKUAST-Jammu
₹58,100
22 Jan 2026
17 Dec 2025
14 Jan 2026
18 Dec 2025
12 Jan 2026
18 Dec 2025
Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 Sq. m on plan), including dressing of sides & remaining of bottoms , lift upto 1.5 m , including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50 m
All kinds of soil.
Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level.
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
1:3:6 (1 Cement : 3 coarse sand(zone-III) : 6 graded stone aggregate 20 mm nominal size).
Making plinth protection 50 mm thick of cement concrete 1: 3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well ramed and consolidated and grouted with fine sand including finishing the top smooth
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
1:1½:3 (1 cement : 1½ coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness). Including attached pillasters, buttresses, plinth and string courses fillets columns, pillers, piers, abutments, posts and struts etc. upto floor 5 level exclusing cost of centring shuttering, finishing and reinforcement.
1:1.5:3 (I cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)
Centring and shuttering including strutting, propping etc. and removal of form for
Foundations, footings, bases of columns etc. for mass concrete.
Suspended floors, roofs, landings, balconies and access platform.
Columns, pillars, piers, Abutments, posts and struts
Edges of slabs and breaks in floors and walls.
Under 20 cm wide
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.
Cold twisted/TMT bars
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and size:
Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):
Second class deodar wood
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
Providing and fixing wire gauge in aluminium shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire gauge of dia 0.63 mm in doors/windows and celrestory windows with hinges and necessary 35 mm thick shutters.
With ISI marked M.S. pressed butt hinges bright finished of required size.Second class deodar wood
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
5.0 mm thick glass pane
Providing and fixing glazed shutters for doors, windows and clerestory windows using 5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
35 mm thick
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.
Fixed to openings / wooden frames with rawl plugs screws etc.
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
Providing and fixing bright finished brass handles with necessary screws etc. complete :
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete :
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
Providing and fixing bright finished brass hard drawn hooks and eyes
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
Using flats 30x6mm for diagonal braces and central cross piece
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Granite of any colour and shade
Area of slab over 0.50 sqm.
Providing and laying first quality Double charge Vitrified tiles of size 600 mm x 1200 mm, of approved make, shade and pattern, confirming to IS: 15622, with water absorption not exceeding 0.08 %. The tiles shall be laid over a 20 mm thick cement mortar bed in the proportion 1:4 (1 cement:4 coarse sand) with neat clean cement slurry to enure proper adhesion. All joints shall be filled with matching colour cement based or epoxy grout to obtain a uniform surface. The work shall be completed in line, level, and plumb, inlcuding cost of materials, labour, curing, cleaning, and disposal of waste, all complete as per specifications and directions of the Engineer in charge.
Providing and laying Ceramic floor tiles of size 600x600 mm of 1st quality conforming to IS: 15622 of approved make, colour and shade, laid over a 20 mm thick bed of cement mortar 1:4( (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete in all respects as per the directions of the Engineer in charge.
Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
12 mm cement plaster of mix :
1:6 (1 cement: 6 coarse sand)
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable priming coat with cement primer.
Finishing walls with Acrylic exterior paint of required shade:
New work (Two or more coats applied over and includign priming coat of exterior primer applied @2.20 kg/10 sqm)
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1 mm thick
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead
With cement mortar 1:4 (1 cement : 4 fine sand)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
Two or more coats on new work
French spirit polishing, Two or more coats on new works including a coat of wood filler
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:
in cement mortar
Dismantling tile and stone work in floors and walls laid in cement mortar including stacking material within 50 meters lead.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the walls.
15 mm dia outer dia
20 mm dia outer dia
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete
Inside size
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing & fixing PVC pipes alongwith necessary accessories and fitting (such as tee, elbow, bends etc.) complete item.
PVC pipe (100 mm dia)
Providing and fixing of CERA cone one piece EWC with so
ft slim slow close seat cover, twin flush system (3/6 litres), concealed S trap of 300 mm , approx. size 690x360x740 mm, white vitreous chin with glazed surface and rimless design as per specifications, Catalogue No. S1013240 including materials, labour, fixing and fitting accessories.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes
Providing and fixing of white vitreous china CERA Calvina wash basin with full pedestal, size approx. 560x475x200 mm, including necessary brackets, fixing clamps and fittings as per specifications, catalogue No. S2040116/S2090107, including materials, labour and fixing.
Providing and fixing Cera Ruby single lever wall mixer, chrome plated, inclusive of all concealed parts complete item. Cat No. F1005401CH
Providing and fixing Cera Ruby Single Lever Basin Mixer,chrome plated, complete item. Cat No. F1005451CH
Providing and fixing Bib Cock with Wall Flange , chrome plated complete item. Cat No. F2014151
Providing and fixing CERA Quarter-Turn Brass Angle Stop Cock chrome finish with Wall Flange, Cat. No. F8040204
Providing and fixing of CERA health faucet ( ABS body with 1 meter SS braided connection pipe), chromium plated brass with wall mounting brackets as per specifications including fitting and labour etc. complete. catalogue no. FB8030108B.
Providing and fixing CERA Overhead rain shower square 200 x 200 mm (8” x 8”) with 380 mm (15”) long shower arm, complete item.Cat No. : F7010117AB(ABS Body & Face Plate Chrome Plated)
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing CERA Waste Coupling 32mm Size Full Thread. Cat No. : F8050101
Providing and fixing CERA Bold Soap Dish chrome plated complete item. Cat No. : F5013106CH
Providing and fixing CERA Meridien Tumbler Holder. Cat No. : F5015107CH
Providing and fixing CERA Towel Ring, chrome plated. Cat No. : F5001105
Providing and fixing CERA Meridien Towel Rack 24" Cat No. : F5015101CH
Providing and fixing CERA Oceana corner glass shelf complete item. Cat No. : F5005102
Providing and fixing CERA Quatrino Single Bowl Sink with Drain Board- Matt finish, Size: 813 x 457 mm (32" x 18") Depth: 203 mm (8") complete with necessary accessories and fittings. (Cat No. : B4512123M)
Providing and fixing Sink mixer (wall mounted) with 150 mm (6") long swivel spout, connecting legs and wall flanges, complete with necessary accessories. (Cat No. : F1003501)
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe
32 mm dia
Providing and fixing 100 mm CP grating.
Providing and fixing Round strainer 110 mm dia for kitchen sink. Cat No. : B4811511
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For fixed portion
Powder coated aluminium (minimum thickness of powder coating 50 micron)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
15 mm nominal bore with 45 cm length.
Providing and fixing aluminium handles ISI marked (powder coated) with necessary screws etc. complete :
15 mm nominal bore with 45 cm length.
Providing and applying post-construction anti-termite treatment to existing building including drilling holes at the junction of wall and floor, injecting approved chemical emulsion (such as Chlorpyrifos 20% EC or equivalent as per IS 6313 Part III-2013) at specified rate, plugging the holes with cement mortar, and treating all necessary locations (including wooden portions in contact with masonry) as per specifications and directions of Engineer-in-Charge, complete as per IS 6313 (part III) for existing buildings. Job includes safe handling of chemicals, covering/ protecting site as required, and cleaning up after application, with minimum disturbance to regular occupancy and use of building. Rate includes cost of all materials, labour, tools and plant, and scaffolding as required. Measurement and payment shall be made only for the plinth area of the ground floor, regardless of the number of storeys.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
TermsandConditionsoftheContract.pdf
Tender Documents • 0.22 MB
BOQ_967369.xls
BOQ • 1.87 MB
Download all tender documents and submit your bid