REPAIR / REPLACEMENT OF JOINERY, PLUMBING FITTINGS ETC AND ALLIED B and R MAINT WORKS TO CERTAIN BLDGS OF ZONE A and B AT DHANA MILITARY STATION.

Amount

Taking down wooden chowkhat or frame area exc 1.5 Sqm but not exc 4 Sqm each with shutter (without taking off shutter from frame), complete all as specified and directed.

All as per item No 1 above but not exc 1.5 Sqm each, complete all as specified and directed.

Taking down wooden shutter of any description exc 1 Sqm but not exc 2 Sqm each, complete all as specified and directed.

Supply & fixing 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete including treating the ends of chowkats with coal tar/black paint etc, complete all as specified and directed.

Supply & fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete all as specified and directed.

Supply & fixing 165 x 60 mm size Pressed steel frames 1.25mm thick for doors with two rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete all as specified and directed.

Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of 1st class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Part-I, Sec-8, clause 8.24(b) fitted to chowkats, complete all as specified and directed.

Supply and fixing 35 mm thick 2nd class HW plain, framed, factory made panelled shutters (two panels), with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), cleaned seasoned and chemically pressure treated etc, complete all as specified and directed.

Supply & Fix 30 mm thick Flush shutters, solid core construction and plywood face panels, commercial type on both sides complete all as specified and directed by Engr in Charge.

Supply & Fix 18 mm thick Plywood over door / window frame and walls in girth not less than 0.60 M in interior decoration complete with necessary fitting like glue or any other binding material and ply filling in gap between wall and Plywood frame etc, complete all as specified and directed by Engr in Charge.

Supply & Fix 8 mm thick Plywood over door / window flush Shutters in interior decoration fixed with glue or any other binding material for groove cutting or any other design, complete all as specified and directed by Engr in Charge.

Supply & Fix 1.00 mm thick laminates / Sunmica/ decorative face veneers in any design/colour/pattern over door / window flush Shutters or Plywood in interior decoration fixed with glue or any other binding material, complete all as specified and directed by Engr in Charge.

Supply & Fix fancy brass assembly handle lock with Key set in interior designed flush shutters any size and colour complete all as specified and directed by Engr in charge Make:- godrej / Link

Supply & Fix fancy brass handle size not less than 200 mm in interior designed flush shutters any colour, complete all as specified and directed by Engr in charge. Make:- godrej / Link

Supply & Fix shuttering Magnet complete all as specified and directed.

Supply & Fix pointed backside door stopper complete all as specified and directed.

Supply & Fix S/S Hinges size 100 mm in L type or any other type, complete all as specified and directed.

Material & labour in repair 18/19 mm thick pre-laminated particle board, interior graded, pre-laminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak beading of all sides, complete all as specified and directed.

Supply & fixing solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings and making good with plastering in CM 1:4 including distempering as required at site complete all as specified and directed. Make :- M/s Rajshri plastiwood / M/s Sintex Industries Ltd.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame with and incl. 3nos aluminium alloy hinges at site as per specification & drawing. Make :- M/s Rajshri plastiwood / M/s Sintex Industries Ltd.

Supply & fixing steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. Make :- M/S Metro Industries, M/S Sen-Harvic , M/S Shiv Mullar

Ditto as per item 13 but without glazing bars, complete all as specified and directed. Make :- M/S Metro Industries, M/S Sen-Harvic, M/S Shiv Mullar

Supply & fixing Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. Make :- M/S Metro Industries,M/S Sen-Harvic , M/S Shiv Mullar

Material & labour for mild steel work in framed work such as grills, gratings, guard bars etc., including angle frame and hinges where required with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165, complete all as specified and directed.

Material & labour for Mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitered angles etc as requires. complete all as specified and directed.

Material & labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings etc, complete all as specified and directed.

Supply & fixing in repairs sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel 3 mm thick complete all as per specified and directed. Make:- Modiguard / saintgobin / Hariyana glass

Supply & fixing sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick complete all as per specified and directed. Make:- Modiguard / saintgobin / Hariyana glass

Supply & fixing galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.

Supply & fixing in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.

Supply and Fixing of Stainless steel Drapery Rods (curtain rods) of 25 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length etc, complete all as specified and directed.

Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws complete all as specified and directed.

Material & labour for 150mm extruded aluminium alloy handles, fabricated type anodized, complete all as specified and directed.

Supply & fixing for 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply & fixing 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast of extruded sections and fixing bolt and sliding bolts of extruded sections of cast aluminium alloy etc, complete all as specified and directed.

Supply & fixing 500 ltr capacity rotational mounded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 15mm bore PVC float valve high pressure with epoxy coated aluminium rod and high density plastic vavle screwed for iron pipe complete and disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity and removing outside MD land etc., complete all as specified and directed. Make :- Sintex, polywell, Rotex

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Supply & fixing steel water tubing medium grade galvanizes fixed to walls, floors, roof ceiling etc including all tube fittings of 15mm bore complete all as specified and directed. Make :- Tata, Swastik, Surya prakash

Supply & fixing in repair 15mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic vavle screwed for iron pipe and fixed of 20mm dia (min wt 210 grms), complete all as specified and directed. Make :- Prayag, polytuff or Shakti

Supply & fixing in repair vitreous china wash basin white flat back size 550x400mm excluding 15mm dia fancy type PVC pillar taps , PVC waste pipe ,PVC waste coupling brackets, PVC connections 15mm dia 450mm long complete all as specified and directed. Make :- Hindware, Parryware (superfine), Cera (Ist quality)

Supply & fixing in repair Bib tap 15mm standard of cast copper alloy with crutch or butterfly handle screwed down for iron pipe and fixed, complete all as specified and directed.

Supply & fixing in repair 15mm stop valve standard of cast copper alloy with crutch or butterfly handle high pressure screwed for iron pipe and fixed, complete all as specified and directed.

Supply & fixing in repair 15mm dia shower rose of PTMT any colour high pressure screwed for iron pipe and fixed (min wt 40 grms) complete all as specified and directed. Make :- Prayag or equivalent and approved by AGE(I).

Supply & fixing HDPE pipes or pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors, complete all as specified and directed.

Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet set black closed pattern with flat bottom and cover with mild steel chromium plated hinging devices and chromium plated Jet arrangement with 1.00 mtr long flexible pipe for fixed with suitable system, complete all as specified and directed.

Supply & fixing as in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, and PVC connection 15mm dia, complete all as specified and directed. Make :- Hindware, Parryware ( superfine), Cera (Ist quality)

Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer, complete all as specified and directed.

Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

Material & labour for complete removal of old finishes i.e white wash, pili matti etc. and applying two coats of Oil bound distemper over a coat of putty 1.5mm thick layer average etc, complete all as specified and directed.

Material & labour for Preparation of old surface and applying two coats of white wash on ceiling, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level), complete all as specified and directed.

Material & labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth with using extra cement, complete all as specified and directed.

Supply & fixing glass dividing strips, 38 x 3 mm thick and inserted in position, confirm to design, complete all as specified and directed.

Material & labour for 50mm thick cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m in forming and at every change of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises etc, complete all as specified and directed.

Material & labour for non-skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of Each exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & labour for glazed ceramic tiles in vertical surfaces 300 x 600 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match colour over 10mm thick rendering in CM (1:4), complete all as specified and directed.

Material & labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shed polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6, complete all as specified and directed.

Material & labour for vitrified ceramic tiles 10mm thick (square or rectangular) light shed, polished area of each tiles not exceeding 0.36sqm in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or cloloured cement to match including backing coat 10mm thick in CM 1:4, complete all as specified and directed.

Material and labour for 15 to 20mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing in steps, cooking platform, window/ door cills etc complete over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6, complete all as specified and directed.

Rounding to edges of stone slab on edge such as in steps, cooking platform and other similar situation in new or old granite stone slab / Kota stone slab, complete all as specified and directed.

Supply & fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified in SSR Part-I, 2009.

Supply & fixing Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified in SSR Part-I, 2009.

All as per item No 65 above but wood grain printed PVC sheet used instead of plain colour sheet, complete all as specified and directed.

All as per item No 65 above but single side prelam PVC sheet used instead of plain colour sheet, complete all as specified and directed.

Supply & fixing PVC tank cover black color or matching with tank coulor with two PVC bracket and nuts to fix with existing PVC water tank of different capacity 250/500/1000 ltrs capacity, complete all as specified and directed.

Supply & fixing 10 to 15 mm Toughened glass door shutters including necessary jointing cleats, glazing clips, ruber neoprene packing , Stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos , lock including keys 1 set, Stainless steel snap beading & screws etc., complete all as specified and directed

Supply & Fix frosted film or logo in any type or design and size, complete all as specified and directed.

Material & Labour for Double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty and fixed for toughened glass door etc., complete all as specified and directed.

Demolition and breaking of drains pipe (salt glazed stone were, AC, RCC or PVC pipe) set in cement mortar 100 mm internal dia pipe, complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 7210.00 /- ]

siddhant construction