Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC | L1 | Accepted-AOC Accepted being lowest Tenderer as L1 | |
| 2 | L2₹27.1 L+₹5.1 L (23.3%)Rejected-Finance | L2 | Rejected-Finance Rejected Not being lowest Tenderer as L1 | |
| 3 | L3₹27.7 L+₹5.7 L (25.8%)Rejected-Finance | L3 | Rejected-Finance Rejected Not being lowest Tenderer as L1 | |
| 4 | L4₹28.5 L+₹6.5 L (29.7%)Rejected-Finance | L4 | Rejected-Finance Rejected Not being lowest Tenderer as L1 | |
| 5 | L5₹28.7 L+₹6.7 L (30.4%)Rejected-Finance | L5 | Rejected-Finance Rejected Not being lowest Tenderer as L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
29 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(AF) JORHAT
HQ CWE(AF) JORHAT ROWRIAH 785004
84026/E8 SMART PERIODICAL SERVICES TO OFFRS MESS UNIT GUEST ROOM SINGLE OFFRS LIVING AIRMEN BILLETS SNCOS MESS BILLETS SHOPPING COMPLEX AND OTHER OTM ACCN AND MD ACCN OF NP BANGLADESH KVC AREA AT AFS JORHAT UNDER GE AF JORHAT
2024_MES_636394_1
84026/E8
Open Tender
Chemicals/Minerals
Item Rate
180 days
GE (AF) JORHAT
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE (AF) JORHAT
₹50,000
Yes
27 Mar 2024
8 Jan 2024
30 Jan 2024
9 Jan 2024
29 Jan 2024
24 Jan 2024
Amount
M&L Removing Plant including Roots by Dismantling of Brick Work, PCC/ RCC Work including Providing necessary Saffolding in any Situation i.e. on Roof, Parapet Walls, etc. and applying Acid after Removing Roots for preventing the Regrowth and Making Good of Dismantled/ Disturbed Portion using PCC 1:2:4 Type B0, Rendering 10mm thick in Cement Mortar 1:3, Area of Dismantling/ Disturbed Portion 150x150x200mm, complete all as specified and as directed.
Taking down Cement Plaster including Raking out Joints, Hacking for Key, Scrubbing down with Water and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.
M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Ceiling Surfaces, finished Plastered Surfaces Fair and Even, complete all as specified and as directed.
M&L Rendering (Externally) 15mm thick in Cement Mortar 1:4 on Brick or Concrete Surfaces, finished Plastered Surfaces Fair and Even, complete all as specified and as directed.
M&L Rendering (Internally) 10mm thick in Cement Mortar 1:6 on Brick or Concrete Surfaces, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Single Component Polymer Modified Repair Mortar with Compressive Strength Minimum 38 Mpa at 28 Days (ASTM C 109:99) and Tensile Strength Minimum 2.5 Mpa (ASTM C 307) upto 15mm in a Single Coat @ 34.00 Kg Per Sqm for 15mm thickness as per Manufacturer Instructions, complete all as specified and as directed.
M&L Preparing New Plastered Surfaces on Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L Preparing New Plastered Surfaces on Walls and applying Two Coats of Cement Base Paint over a Coat of Alkali Resistant Priming Paint, complete all as specified and as directed.
M&L Preparing New Plastered Surfaces on Walls and applying Three Coats of White Wash, complete all as specified and as directed.
M&L Preparing New Plastered Surfaces on Walls and applying Two Coats of Oil Bound Distemper using Airless Spray Technology with maximum Working Pressure of 3300 PSI and Capable of Operating Single Spray Gun with a maximum Material Hose Length of 30.00 Metre the Spray Machine should be of Reputed Manufacturer with Pro-guard Technology and capability of Tracking Pressure and Paint usage and Certified by Paint Manufacturer and as mentioned in PS and Accessories for applying Distemper should be able to Spray in Hard to reach Areas and Penetration of Distemper on the Surface, complete all as specified and as directed. NOTE : Sanding of Surface to be done by Mechanical Sander with 1500-2700 RPM with Internal Dust Extraction System.
M&L Preparing Old Surfaces (Plastered or Unplastered) of Walls including Cornices, Pilasters, etc. by Brooming down or Steel Wire brushing; Scrapping down Smoke Soot, Moulds, Moss and Efflorescent Salts and Trading Oil and Greasy Spots and applying One Coat of White Wash, complete all as specified and as directed.
M&L Preparing Old Surfaces (Plastered or Unplastered) of Ceiling including Cornices, Pilasters, etc. by Brooming down or Steel Wire brushing; Scrapping down Smoke Soot, Moulds, Moss and Efflorescent Salts and Trading Oil and Greasy Spots and applying One Coat of White Wash, complete all as specified and as directed.
M&L Preparing Old Plastered Surfaces for applying Two Coats of Oil Bound Distemper using Airless Spray Technology with maximum Material, Hose Length of 30.0 Metre the Spray Machine should be of Reputed Manufacturer with Pro-guard Technology and Capability of Tracking Pressure and Paint usage and Certified by Paint Manufacturer and as mentioned in PS and Accessories for applying Distemper should be able to Spray in Hard to reach Areas and Penetration of Distemper on the Surface, complete all as specified and as directed.
M&L Preparing Old Plastered Surfaces for applying a Coat of Oil Bound Distemper using Airless Spray Technology with maximum Working pressure of 3300 PSI and Capable of Operating Single Spray Gun with a maximum Material Hose Length of 30.00 Metre the Spray Machine should be of Reputed Manufacturer with Pro-guard Technology and capability of Tracking Pressure over a coat of Water base Interior grade Primer @ 0.8 Litre (undiluted) Per 10 Sqm in 1:1 Ratio with Water and Paint usage and Certified by Paint Manufacturer and as mentioned in PS and Accessories for applying Distemper should be able to Spray in Hard to reach Areas and Penetration of Distemper on the Surface, complete all as specified and as directed. NOTE : Sanding of Surface to be done by Mechanical Sander with 1500-2700 RPM with Internal Dust Extraction System.
M&L Preparing Old Plastered Surfaces of Walls and applying One Coat of Distempering with 1st quality Acrylic Distemper (Ready mixed) having VOC Content less than 50 Grams Per Litre of Approved Manufacturer of required Shade and Colour complete as per Manufacturer's Specifications, complete all as specified and as directed.
M&L Preparing Old Plastered Surfaces of Walls and applying 1.0mm thick Wall Care Putty, complete all as specified and as directed.
M&L Applying Two Coats of Smooth Interior Acrylic Emulsion Paint with Rich Matt Fininsh having VOC less than 50 Grams Per Litre complying Water in 2:1 Ratio applied over a Priming coat of Interior Wall Primer with Fully Automatic Airless Spray Machine of Paint application with a Flow Speed of minimum 1.00 Litre Per Minute having a Pressure of 3300 PSI and allowing 6 Hours to 8 Hours to Dry the Surface in both the Coats of Paint all as per Manufacturer Instrucitons, complete all as specified and as directed.
M&L Preparing Old Plastered Surfaces of Walls, Applying Two Coats of Smooth Interior Acrylic Emulsion Paint with Texture Finish having VOC less than 50 Grams Per Litre complying LEEDS Criteria @ 1.00 Litre (undiluted) Per 10 Sqm diluted with Water in 2:1 Ratio applied over a Priming coat of Interior Wall Primer with Fully Automatic Airless Spray Machine of Paint application with a Flow Speed of minimum 1.00 Litre Per Minute having a Pressure of 3300 PSI and allowing 6 Hours to 8 Hours to Dry the Surface in both the Coats of Paint all as per Manufacturer Instrucitons, complete all as specified and as directed.
M&L Preparing Old Plastered or Decorated Surfaces of Walls by Washing, Rubbing down, etc. and applying One Coat of Cement Base Paint, complete all as specified and as directed.
M&L Preparing Old Plastered or Decorated Surfaces of Walls by Scrapping and applying Water Proof Cement based Putty @ 1.00 KG (undiluted) Per Sqm of average thickness 1.0mm to obtain an Even and Smooth Surface and Sanding on Putty Finished Surface with Mechanical Wall Sander (having Mechanical Vaccum Mechanism) having RPM not less than 1500, Sanding Pad of 24 Grit or above to Make the Surface Free from Dust, etc. with Skilled Tradesmen, complete all as specified and as directed, Comprising following Steps :- Step 1 : Mix the Putty Powder by Adding Water as per Manufacturer Instructions and Mix it with Putty Mixer with the Mixing capacity of minimum 2.5 KG Putty Per Minute. Step 2 : Applying the First Coat the Prepared Mixer with the help of Fully Automatic Airless Spray Machine of Putty Application having Flow Speed of maximum 6.00 Litre Per Minute with a maximum Pressure 3300 PSI. Step 3 : Allowing 6 Hours to 8 Hours Time to Dry the Putty Surface.
M&L Complete Removal of existing Surface Treatment on Walls, applying Two Coats of Water based Premium Acrylic Smooth Exterior Emulsion of Approved Colour with Silicon Additive and Color Spray Technology, Excellent Dirt Pick up Resistance with Low VOC less than 50 Gram Per Litre, all as per LEEDS Specifications, Anti Algal Properties in Two Coats @ 1.79 Litre (undiluted) Per 10 Sqm diluted with Water as per Manufacturer Instructions over Priming Coat with Fully Automatic Airless Spray Machine of Paint Application with a Flow Speed of minimum 1.00 Litre Per Minute having a Pressure of 3300 PSI, Allowing 6 Hours to 8 Hours Time to Dry Surface in both Coats of Paint all as per Manufacturer Instrucitons, complete all as specified and as directed.
M&L Complete Removal of existing Surface Treatment on Walls, applying Two Coats of 100% Premium Acrylic Emulsion Paint having VOC Less than 50 Gram Per Litre and UV Resistance as per IS 15489:2004, Alkali and Fungal Resistance Exterior Paint of Approved Shade (Company Depot Tinted) with Silicon Additives @ 1.43 Litre Per 10 Sqm over a coat of Priming Coat using Exterior Primer applied @ 0.90 Litre Per 10 Sqm all as per Manufacturer Instrucitons, complete all as specified and as directed.
M&L Preparing Old Painted Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality / grade Paint of as approved Tint), complete all as specified and as directed.
M&L Preparing Old Painted Steel and Iron Surfaces of any description, over 10 Cm Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint), complete all as specified and as directed.
M&L Stencil Writing Letters or Figures (Block, Roman, Italic or Indian), not exc. 30 Cm High, complete all as specified and as directed.
M/S AJOY DUTTA CHOWDHURY & CO
A K DUTTA CHOWDHURY AND CO
SUBHAS CONSTRUCTIONS
NIHAR ENTERPRISE
Chief Builders &Consultants
M/S GOPAL ROY AND CO
A M CHOUDHURY AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .