CERTAIN REPAIR TO INTERNAL ELECTRIFICATION WORKS TO OTM ACCN AT PHASE I AND PHASE II AREA UNDER GE NARANGI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Material and labour for point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per item No 2 above but for One 3 pin 5 Amp switch socket outlet on independent board complete.

All as per item serial No 2 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches complete.

All as per item No 2 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete.

All as per item No 2 here-in-before but wiring with 4 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 4 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete.

Material and labour for point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including concealed/surface PVC Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per item No 7 above but for One 3 pin 5 Amp switch socket outlet on independent board

All as per item serial No 7 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches.

All as per item No 7 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete.

Supply and fix switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and directed.

Supply and fix in repair switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and directed.

Supply and fix socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and directed.

Supply and fix in repair socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and directed.

Supply and fix switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and directed.

Supply and fix in repair switch socket combination outlet 2-in-1, 5 Amp flush type complete all as specified and directed.

Supply and fix switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and directed.

Supply and fix in repair switch socket combination multipurpose, 2 in 1, 3 pin, 5 & 15 Amp flush type complete all as specified and directed.

Supply and fix in repair switch flush type 15 Amp single pole one way all as specified and directed.

Supply and fix in repair socket outlet 3 Pin 15 Amp 240 volts all as specified and directed.

Supply and fix ceiling rose surface bakelite 65x50mm three terminal complete all as specified and directed.

Supply and fix in repair ceiling rose surface bakelite 65x50mm three terminal complete all as specified and directed.

Supply and fix lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and directed.

Supply and fix in repair lamp holder insulated PVC/Polycarbonate/bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and directed.

Supply and fix stepped type electronic fan regulator, two module size, flush type complete all as specified and directed.

Supply and fix in repair stepped type electronic fan regulator, two module size, flush type complete all as specified and directed.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as specified and directed.

Material and labour for wiring with 2 runs of 1.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / Qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 runs of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for wiring with 2 runs of 2.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 runs of 2.5 Sqmm cable and 1 run of 2.5 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / Qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run sof 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 runs of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Supply and fix in repair 1100 volts grade heavy duty flat cable of size 4 Sqmm 2 core, PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections supported by 4mm dia suspension wire complete all as specified and as directed.

Supply and fix in repair wall mounted decorative luminaire in design mesh suitable for 8W/10W LED lamp B22 base including lamp of 8W/10W complete all as specified and directed.

Supply and fix in reapair batten type LED light fitting 1x 20W, 220V, AC decorative type with internal SPD upto 4KV and overload voltage protection upto 440V including flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix in repair LED (double sided connection) ultra bright polycarbonate tube rod 18/20 watt retrofit in existing box type tube light complete all as specified and directed.

Supply and fix LED light fitting 1X9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair LED light fitting 1X9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Material and labour for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased (protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 40 mm graded stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I.

Taking down ceiling fan 1400mm /1200mm sweep, sealing cable end ,dismantling blade & removing the same and refixing on same location or other location of any type/make and size carefully from fan hook, and transporting from any location inside army area to MES E/M store yard and back after repairing complete all as specified and directed.

Material and labour for painting of ceiling/exhaust fan complete with blades, in situ with synthetic enamel paint by spraying including filling cavities with filler ,ones coat after cleaning all dust etc. complete all as specified and directed.

Rewinding ceiling fan by cutting the existing copper winding of ceiling fan 1200/1400 mm capacity and make any type with super enamelled copper wire of suitable size including all insulating materials varnishing and neating complete including satisfactory testing of fan on full load to entire satisfaction of Engineer-in-Charge complete all as specified and directed.

Rewinding ceiling fan by cutting the existing copper winding of ceiling fan Heavy Duty old model 1200/1400 mm capacity and make any type with super enamelled copper wire of suitable size including all insulating materials varnishing and neating complete including satisfactory testing of fan on full load to entire satisfaction of Engineer-in-Charge complete all as specified and directed.

Supply and fix in repair fan bearing of size 6201/6202 suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed.

Supply only rubber reel incl shackle clamp, bolt, nut, washer split pin of appropriate size as required complete all as specified and directed

Supply only down rod made of 15mm bore GI pipe heavy duty 45 cm long incl machining/ threading/drilling hole of size suitable for nuts and bolts washer and split pin suitable for any size and make of fan complete all as specified and directed.

Supply only plastic canopy upper & lower of any size and make of ceiling fan fixed with suitable size of screws complete all as specified and directed.

Taking down exhaust fan of size 200mm to 400mm sweep of any make and refixing on same location or other location carefully from site & transporting from any location inside Army area to MES E/M store yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing fan blade body etc thoroughly provision of new greasing replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction of Engr-in-charge complete all as specified and directed. Note :- (i) Defective/unserviceable parts replaced will be paid separately in respective item of Sch 'A' as Supply only. (ii) The cost of taking down unserviceable parts included in this item.

Taking down wall fan of size 200mm to 400mm sweep of any make and refixing on same location or other location carefully from site & transporting from any location inside Army area to MES E/M store yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing fan blade body etc thoroughly provision of new greasing replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction of Engr-in-charge complete all as directed. Note :- (i) Defective/unserviceable parts replaced will be paid separately in respective item of Sch 'A' as Supply only. (ii) The cost of taking down unserviceable parts included in this item.

Rewinding the armature for 200mm to 300mm sweep exhaust fan any make with super enamelled copper wire of suitable size with and including all insulating materials varnishing complete all as specified and directed.

Rewinding the armature for 450mm Heavy Duty exhaust fan any make with super enamelled copper wire of suitable size with and including all insulating materials varnishing complete all as specified and directed.

Supply and fix in repair ball bearing of size suitable for exhaust/wall fan upto 450 mm sweep complete all as specified and directed

Supply and fix in repair for condenser ISI marked 230/240/250 volts AC 4 MFD suitable for exhaust fan including condenser spacer and soldering of condenser wire to fan wire and fixing complete all as specified and directed.

Supply and fix in repair for fan capcitor 2.5 Mfd suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed.

Supply and fix in repair for factory made, sheet steel distribution boards, TPN, 4 Way, double door, with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed.

Supply and fix in repair for MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed.

Supply and fix in repair for MCB DB of sheet metal enclosure double door SPN 4 way with 200A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed.

Supply and fix in repair for MCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed.

Supply and fix in repair for MCBs, SP 6 to 32 Amps in accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 KA, C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed.

Supply and fix in repair for MCBs, SPN 6 to 32 Amps in accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 KA, C-series marked fixing in DBs (DBs catered separately in this Schedule) omplete all as specified and directed.

Supply and fix in repair for MCB Triple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 KA, C-series rupturing capacity providing in DB complete all as specified and directed.

Supply and fix MCCB 40 to 63 Amp,415V 'C' Series 16 KA complete all as specified and directed

Supply and fix MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as specified and directed.

Supply and fix in repair for MCCBs 415 V, 16 KA, 4P, 63 Amps complete all as specified and as directed.

Supply and fix in repair for MCCBs 415 V, 16 KA, 4P, 100 Amps complete all as specified and as directed.

Supply and fix in repair modular fan regulator, 120 W, 2 module complete all as specified and as directed.

Supply and fix in repair modular switch 1 way 6 amp, 1 module complete all as specified and as directed.

Supply and fix in repair modular switch 1 way 16 amp, 1 module complete all as specified and as directed.

Supply and fix in repair modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix in repair modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 1 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 2 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 3 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 4 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 6 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 8 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 12 module complete all as specified and as directed.

Supply and fix in repair metal flush box 1/2 module for modular switches complete all as specified and as directed.

Supply and fix in repair metal flush box 3 module for modular switches complete all as specified and as directed.

Supply and fix in repair metal flush box 4 module for modular switches complete all as specified and as directed.

Supply and fix in repair metal flush box 6 module for modular switches complete all as specified and as directed.

Supply and fix in repair metal flush box 8 module for modular switches complete all as specified and as directed.

Supply and fix in repair metal flush box 12 module for modular switches complete all as specified and as directed.

Dressing of pre-wired casing caping/PVC conduit by changing Casing caping /PVC conduit and necessary connecting items (such as flexiable conduit, screws etc) complete all as specified and directed.

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix in repair 15 watt LED recessed mounted luminaire with high brightness LED for glare-free homogenous illumination suitable for Armstrong/grid ceiling and fixture size in mm (LxWxH) 295x295x70 complete all as specified and directed.

Supply and fix in repair round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair/replacement LED 35 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed.

Material and labour for GI bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape all as directed, length of GI Pipe shall not be less than 2.0 metre for fixing of light fittings including taking out old bracket complete all as specified and as directed.

Supply and fix in repair/replacement LED 40 W post top made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection suitable for dia upto 60mm complete all as specified and directed.

Supply and fix in repair of iron cage in straight designer mesh suitable for reqiure size of gate light with proper fixing and make a good provision of suitable size GI pipe for fixing of gate light as per site and directed by Eng-in -charge.

Supply and fix in repair PVC translucent type globe for existing bollard lights (as per sample) of dia 40/50mm complete all as specified and as directed.

Supply and fix in repair LED surface mounted round downlighter 15 W with pressure die-cast sink and PC difuser in chrome finish diffuser with integrated driver complete all as specified and directed.

Disconnecting the main power supply to distribution box and make a proper dressing of SPN/TPN/VTPN MCB/MCCB DBs of pre-connected MCBs by changing screw of DB cover, earth wire and other necessary connecting items and dressing of wires with the help of cable tie inside the distribution box after completion supply power complete all as specified and directed.

Supply and fix in repair/replacement LED bollard light upto 20W LED bollard with opal acrylic diffuser and IP 65 protection suitable for dia upto 60mm complete all as specified and directed.

Supply and fix in repair for cable junction box of size 130x130x77mm, IP66 with metric knockout for cable entry (Dust and power jet proof according to IEC 60529), shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK08) totally insulated (class II) made of halogen and silica free recyclable material UV resistant having high grade gasket made of polyurethane, one no. MCB DP 7Amps with locking arrangement and M40 size cable gland and one M32 size gland suitable for 2.5-6.0 sqmm cable complete all as specified and directed.

M/s JK Jangid and Company

M/s Dhani Enterprise

J K CONSTRUCTION

M/S. SUBHAS CONSTRUCTION CO.

MAHINDER ELECTRICALS