Work of shifting HT/LT line which is obstructing road widening from Phalouda cut to Purkaji block on NH-58. in the area of EUDD-Jansath, Muzaffarangar

Amount

Safe Carriage of Following Material From Store to Work Site Including Safe Loading & Un Loading at Both Ends (0 to 40 KM)

ST Pole 13 mtr Long

ST Pole 11 mtr Long

Earthing set complete

11 KV X-arms V-Type

GI- wire 6/8/10 SWG for garuding

ACSR Rabbit conductor

LT ABC Cable (3x120+1x95+1x16) Sqmm.

LT ABC Cable (3x95+1x70+1x16) Sqmm.

LT ABC Cable (3x50+1x35+1x16) Sqmm.

LT Distribution Box 3 Phase

LT AL XLPE CABLE 1CX240 SQMM

LT AL XLPE CABLE 1CX120 SQMM

STAY SET COMPLETE

11 KV POLYMERIC PIN INSULATER

11 KV POLYMERIC DISC INSULATE

11 KV DISC FITTING

11 KV D/O FUSE SET

11 KV TPMO switch

MS channel/angle

MS Angle Iron 65x65x6 mm

Top Channel 125x65 mm

Errection of Single Support of ST Pole 11 Mtr Long and fixing all accessories as per norms (Nut, bolts, staone pad 300x300x75 mm and clamps will be provided by contractor)

Errection of Single Support of ST Pole 13 Mtr Long and fixing all accessories as per norms (Nut, bolts, staone pad 300x300x75 mm and clamps will be provided by contractor)

Errection of Double Pole Structure of ST Pole 11 Mtr Long and fixing all accessories as per norms (Nut, bolts, staone pad 300x300x75 mm, E-bracket for 11 KV and clamps will be provided by contractor)

Laying of ACSR Rabbit Condouctor

Febrication of MS channel/angle

Providing and fixing of G.I. barbed wire

Laying of LT ABC Cable (3x120+1x95+1x16) Sqmm. (Nut, bolts and clamps will be provided by contractor)

Laying of LT ABC Cable (3x95+1x70+1x16) Sqmm. (Nut, bolts and clamps will be provided by contractor)

Laying of LT ABC Cable (3x50+1x35+1x16) Sqmm. (Nut, bolts and clamps will be provided by contractor)

Installation and commissioning of LT distribution box 3 phase

Laying of LT AL XLPE CABLE 1CX240 SQMM

Laying of LT AL XLPE CABLE 1CX120 SQMM

Errection fo 11 KV Fuse Set

Errectiono f 11 KV TPMO switch

Guarding of 11 KV Line with (Holding clamp with bolts and nut, EYE bolt will be bprovided by contractor)

Errection of earthing complete (Fixing All Accessories As Per Norms)

Errection of stay complete and Grouting of stay rods including all work of excavation, cement concreet in size .60x.60x.30mm in ration 1:4:4 (Cement, sand, 40mm brick ballast) as per drg. including back filling & proper ramming etc. with fixing tightening & nuzzling of stay set with the pole (all material provided by contractor).

Grouting of Pole with cement, sand, bricks CC ratio 1:4:4 as per RESPO norms (all material provided by contractor).

Dismentiling of 250 KVA transformer form plinth and disconnection of LT and HT side

Dismentiling of 100 KVA and blow 100 KVA transformer form D/P and disconnection of LT and HT side

Making of Plinth of size (5'x5'x5') for placing transformer. Plinth constructed by 2:3:5 cement, sand and first class bricks and plinth covered by plaster with 1:3 cement and sand for smooth working all complete the works. (all materials provided by contractor)

Providing of earth electrode for chemical earthing pipe in pipe type proper hot dip Galvanization die 50mm length 3 mtr-32mm x 6mm terminal connection hole dia 8mm. The cavity between the pipe & pipe if filled with conductive mixture for hermetically filling inside the cavity i.r. between secondary conductor & Primary conductor & Primary conductor, crystalling compound is to be injected in the electrode assembly. It is a combination of high conductivity metal alloys, copper & aluminium power, conductivive carbon/ cement and bonding material etc. The electrode should be sealed from both the ends.

Boring for earthing of Transformer by bokki process of 100 mm dia and work of deep boring of water level lowering of 32 mm dia with providing ISI Class GI Pipe in the boring upto 80 feet depth with the halp of threading and socket and laying of 20x5 sqmm MS strip from the pipe upto the top with the help of proper electric welding. This earthing strip has to connected to the transformer body properly with proper nuts and bolts etc. (all materials provided by contractor)

Boring for earthing of Transformer by bokki process of 100 mm dia and work of deep boring of water level lowering of 32 mm dia with providing ISI Class GI Pipe in the boring upto 80 feet depth with the halp of threading and socket and laying of 20x5 sqmm MS strip from the pipe upto the top with the help of proper electric welding. This earthing strip has to connected to the transformer netural properly with proper nuts and bolts etc. (all materials provided by contractor)

Fancing for 250 KVA transformer (all material will be provided by contractor)

Errection of 250 KVA transformer on plinth and re-connection of LT and HT side.

Errection of 100 KVA and blow 100 KVA transformer on D/P and connection of LT and HT side.

Providing and fixing of danger board with clamp.

Providing of alluminium paint and painting of electric poles

Dismentiling of following materials and carrage of materials from site to JE Store inculding safe loading and unloading at both ends as per site condition -

ST Pole old and used

ACSR Weasel scrap

Iron Scrap

CHARU ENTERPRISES (BID ID -5369928)

M/S MOHAMMAD ABBAS (BID ID -5369818)

RAHUL ELECTRIC ENGGINEERING WORKS (BID ID -5368735)

ASHISH ELECTRICALS (BID ID -5369115)

SHIKHA ENTERPRISES (BID ID -5370539)