Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96.6 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹99.9 L+₹3.3 L (3.44%)Rejected-Finance | L2 | Rejected-Finance Quoted rates higher than L1 bidder | |
| 3 | L3₹1.0 Cr+₹3.7 L (3.82%)Rejected-Finance 21 A 2ND STREET ARULANANDA AMMAL NAGAR THANJAVUR 613007 | THANJAVUR | TAMIL NADU | 613007 | L3 | Rejected-Finance Quoted rates higher than L1 bidder | |
| 4 | L4₹1.2 Cr+₹21.7 L (22.5%)Rejected-Finance 1 181 KAMATCHI AMMAN KOVIL STREET KANNAN COLONY CHINTHAMANI MADURAI 625009 | MADURAI | MADURAI | TAMIL NADU | 625009 | L4 | Rejected-Finance Quoted rates higher than L1 bidder |
Tender Value
₹1.1 Cr
EMD Value
₹1.9 L
Closing Date
28 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF TRIVANDRUM
CWE AF TRIVANDRUM HQ SAC IAF COMPLEX AKKULAM THURUVIKKAL POST TRIVANDRUM 11
Provn of rainwater harvesting system at AF Stn Thanajvur
2022_MES_564818_1
CWE(AF)/TVM/82440E8 Rainwater harvesting Thanjavur
Open Tender
Construction Works
Item Rate
270 days
GE AF Thanjavur
Class B Category a(i)/ a(ii)
6 documents required · 6 mandatory
₹1,000
GE AF Thanjavur
₹1.9 L
Yes
12 Jan 2023
23 Nov 2022
30 Dec 2022
23 Nov 2022
28 Dec 2022
14 Dec 2022
23 Nov 2022 - 8 Dec 2022
Amount
SCHEDULE 'A'
Excavating over areas, n exc1.5 m deep and getting out in hard / dense soil by mechanical means all as specified and as directed.
Excavating over areas, exc1.5 to 3m deep and getting out in hard / dense soil by mechanical means all as specified and as directed.
Excavating over areas, exc1.5 to 3m deep and getting out in soft disintegrated rock by mechanical means all as specified and as directed.
Excavating over areas, exc3 to 4.5m deep and getting out in hard / dense soil by mechanical means all as specified and as directed.
Excavating over areas, exc 3 to 4.5m deep and getting out in soft disintegrated rock by mechanical means all as specified and as directed.
Excavating in trenches, nexc 1.5 m deep and getting out in hard / dense soil by mechanical means all as specified and as directed.
Excavating in trenches, exc 3 to 4.5 m deep and getting out in hard / dense soil by manually all as specified and as directed.
M&L cement concrete 1:3:6 type C1 in foundations, filling and mass concrete using 40mm graded stone aggregate complete all as specified and as directed.
M&L for uncoursed random rubbled masonary well bonded and built in cm 1:6 complete all as specified and as directed.
Providing Precast cement concrete 1:3:6 type C1, using 20 mm graded stone agg incl formwork for bonders in stone walling setting with plain fair faces, including chamfers weatherings, throating etc. and in cement mortar 1:6 complete all as specified and as directed.
M&L for Rubble Boulder pitching, laid dry hand packed tightly laid in dry complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate for making surface channels as spill ways including formwork complete all as specified and as directed.
M&L for PCC 1:2:4 using 20mm aggrgate type B-1 for coping and bed blocks including formwork complete all as specified and as directed.
Supplying and laying of M sand filter media of grade 2 mm to 4.75mm approved quality free from vegetation or any dirt, clay and silt particle to be removed by washing and settlement method complete all as specified and as directed.
M& L Loose filling with well graded brocken stone aggregates of gauge 12.5mm to 20mm in layers of gradation wise for filtermedia complete all as specified and as directed.
M& L Loose filling with well graded brocken stone aggregates of gauge 20mm to 40mm in layers of gradation wise for filtermedia complete all as specified and as directed.
M&L for Shingle filling fine grade 4.75mm to 20mm in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
Drilling of bore well 350mm outer dia any type of strata by rotary test rig method or any other approved method for a depth up to hard dense soil / soft disintegrated rock level using soil bit at the location shown by Engr-in charge complete all as specified and as directed.
Development of successful borewell by compressor and removing the fine sand, rock particles and other dust items etc complete all as specified and as directed.
Supply and inserting PVC plain casing pipe of outer dia 200mm 6kg/sqcm rating heavy duty screwed and socket type for bore well conforming to IS specfication with IS marked complete all as specified and as directed.
Supply and inserting PVC slotted casing pipe of outer dia 200mm 6kg/sqcm rating heavy duty screwed and socket type for bore well conforming to IS specfication with IS marked complete all as specified and as directed.
Supply and fixing PVC 200mm dia bore cap for casing pipe suitable all as specified complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layersnot exc 25 cm complete all as specified and as directed.
Removing excavated material exc. 1.50 km but n exc. 5 km and deposited and levelled by mechanical means complete all as specified and as directed.
M&L for Framed work on Fe 410 (Grade E-250)as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
Supply only Chain link fencing 4mm dia galvanised steel wire 40 mm x 40 mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.
S&F Mild steel screw bolts (machine made) dia 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10 cm long complete all as specified and as directed.
Reinforced concrete pipes, class NP2, laid and jointed complete with collars of 300mm dia complete all as specified and as directed.
Preparing new steel surfaces exc 10cm width/girth, applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Preparing new steel surfaces nexc 10cm width/girth, applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for Brickwork with subclass‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.
M&L for Rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.
M&L for precast cover slabs of type B1 1:2: 4 using 20mm garded stone aggregate with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4 complete all as specified and as directed.
Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, the formwork soffit complete all as specified and as directed.
S&F of Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L for Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete.
M&L for RCC M-30 grade concrete (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC M-30 grade concrete (using 20mm graded stone aggregate) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.
M&L for RCC M-30 grade concrete (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
S&F of Mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for prepartion of new plasterd surface and applying two coats of cement base paint over one coat of primer complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 using 40mm grade stone aggregate as in surface channels and drains complete all as specified and directed.
Demolition of Brickwork laid in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (below or above ground level) complete all as specified and as directed.
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n exc 400 sqm exceeding 50m deep and nexc 100m deep complete all as specified and as directed.
Soling (or sub base) with broker boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber of 200mm thick except materials
Soling (or sub base) with broker boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber of 150mm thick complete all as specified and as directed.
M&L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed.
M&L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required except materials
Apply evenly a priming coat with bituminous primer at 10Kg per 10 Sqm using VG-10 grade paving bitumen complete all as specified and as directed.
M&L for bituminous macadam with VG 30 grade paving bitumen any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen of any penetration with binder content of 4% by weight of total mix for profile correction, hump formation, etc complete all as specified and directed by Engineer-in-Charge.
Excavating over areas, n exc1.5 m deep and getting out in soft disintegrated rock by mechanical means (for Road cutting) complete all as specified and directed
M&L for Rolling and consolidation to formation surfaces in cutting with roller 8 to 10 Tonnes complete all as specified and as directed.
Supply and fixing of PVC coated galvanised wire mesh 150x100mm,, 4mm dia , made up into mattresses or cages, lapped, wired and laid in position, including closing after filling for protection of stone pitching complete all as specified and as directed.
Total of Schedule 'A'
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .