Karnataka

Active

Works

Buildings

Construction of Jagajyothi Basaveshwara Puthali and Nijasharana Ambigara Chowdayya Puthali in Gurmitakal Constitution at Gurmitakal City Yadgir District

Public Works Department

PWD Division Office Yadagiri | Yadgir, Karnataka

Amount: ₹99.7 LCloses: 16 Jul 20267d left

Tender Value

₹99.7 L

EMD Value

₹2 L

Closing Date

16 Jul 2026, 9:30 pm7d left

Tender Inviting Organisation

Name

Public Works Department

Work Description

Construction of Jagajyothi Basaveshwara Puthali and Nijasharana Ambigara Chowdayya Puthali in Gurmitakal Constitution at Gurmitakal City Yadgir District

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT36253

Reference Number

PWD/2026-27/BD/WORK_INDENT36253

Tender Type

Open

Product Category

Buildings

Location

PWD Division Office Yadagiri

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredContractor Registration Class-III & Above

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 a-achieved in at least two financial years a minimum financial turn over in all cases of civil engineering construction works only Rs.199.44 Lakhs and The Financial Turn Over Certificate Should ear the UDIN Number invariably and duly signed by registered chartered Accountant. The Certificate without UDIN number will not be considered

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 b-Satisfactorily Completed, as prime contractor, at least one similar work of value not less than Rs.49.86 Lakhs

RequiredTo qualify for award of this contract, each Tenderer in its name have should in the last five year i.e.2021-22 to 2025-26 c-executed in any one year the following minimum quantities of work As per Govt CircularNo.PW 60 CRM 2021 Bengaluru Dtd.08.11.2021 1-Earth Work/Embankment/Filling-349.93 Cum 2-PCC/RCC-34.42 Cum 3-TMT Steel-1.96 Tonne 4-SSM/BBM-38.69 Cum 5-Plastering-120.00 Sqm 6-Flooring-167.65 Sqm 7-Casting, Supplying, Erecting & Fixing of Statue-2344.00 Cum 8-MS grill-504.00kg

RequiredLiquid Assets and/or availability of credit facilities of not less than Rs.49.86 Lakhs Credit Lines/Letter of Credit/Certificates from the Banks for meeting the fund requirement etc

RequiredLatest income tax clearance certificate along with last five years balance sheet and profit & loss statement duly certified by the CA

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The Tenderer shall obtain the work done certificate in the prescribed format from the competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the original Certificates and attach file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical bids for physical verification

Conditional tenders will not be accepted

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive)

The Tenderer shall scan the Original Ownership Documents/Lease/Hire commitment Agreement for the Machinery and attach the scanned file to the Bid. The original Documents shall be produced at the time of opening technical Bids for physical verification

The tenderer shall note that the scanned Document scan also be uploaded in the tasks created under Document/Evidence Required from the Bidder

The Employer reserves the right to Reject any or all Tenders without assigning any reason

The tenderer should maintain the road during the defective liability period

The Department is not responsible for any delay in accessing KPPP portal

Tender shall note that the Tenders of those found Eligible as mentioned in Clause-3 - Qualification of the Tenderer in Section 2: Instructions to Tenders (ITT), will only be considered for evaluation

Tenderer shall note that unit rate to be quoted includes all the sundry expenses, all leads, all lifts and hire charges of machinery, royalty etc

The defect liability period for this work is 365 days

Bidders are advised to note that, 18% GST will be added to the contract amount

The successful Tenderer must Deliver Security Deposit Amount equivalent to 5 Percentage of contract price in the form of DD TDR Bank Guarantee plus additional security for unbalanced tender as per G O No PWD 289 CRM 2013 Bangalore dated 13 01.2013

The successful bidder should submit the addl. security deposit in form of Original DD/FDR/BG to this office at the time of execution of the agreement

Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of 2026-27 in the Technical Qualification Criteria mentioned in the section

Period for completion of this work is 06 (Six) months including Monsoon

The Tenderer shall furnish as part of his tender earnest money deposit in the amount as shown in column 4 of the Table of IFT for this particular work. Tenderer can pay the full EMD amount of Rs.2,00,000.00 through e payment or the Earnest Money Deposit shall be in two parts. Part 1 Rs.1,00,000.00 by e-payment Part 2 Rs.1,00,000.00 EMD shall be in favor of Executive Engineer PWD Yadgir Division Yadgir and may be in the form of Bankers Cheque OR Demand Draft OR Pay order in favour of Executive Engineer PWD Yadgir Division Yadgir payable at Yadgir to the Executive Engineer PWD Yadgir Division Yadgir or Bank Guarantee in the prescribed format obtained form any Nationalized OR Scheduled Bank

Estimate rates are excluding GST and the prevailing GST 18% of APT is added in the form of lump sum in sanctioned estimate as per the guidelines in common SR 2021-22 GO PWD 51 RDF 2019 Bengaluru, Dated 18.03.2022. Therefore APT OR ECV is excluding GST. In KPPP portal there is no option to add GST separately over and above APT during DTS process. Hence even though the tenderer has been invited by opting for the inclusive option, the item wise rates do not include GST. Hence GST will be paid separately for the quoted amount as per the Govt. Circular No.FD/447/Expenditure/12/2022 dated 30.07.2022. Therefore GST declaration certificate must be uploaded mandatory by the prospective bidders

All Items completed as per specifications and direction of engineer-in-charge of work.

The verification of all past experiences (Turn-Over, Workdone and LOC) are excluding GST.

In respect of work costing more than Rs.1.00 Cr. The Contractor shall establish field laboratory at his cost with requisite equipment OR as stipulated in the agreement. As per approved QAP from quality assurance department

The Technical bid evaluation will be done as per GO No.PWD/60/CRM/2021 Dtd.08.11.2021

Technical Criteria

Past Experience

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 a) achieved in at least two financial years a minimum financial turn over (in all cases of civil engineering construction works only) Rs.199.44 Lakhs and The Financial Turn Over Certificate Should ear the UDIN Number invariably & duly signed by registered chartered Accountant. The Certificate without UDIN number will not be considered

Audited CA Certificate of Annual Turnover

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (b)Satisfactorily completed, as prime contractor, at least one similar work of value not less than Rs.49.86 Lakhs

Work Done Certificate

To qualify forwarded of this contract, each Tenderer in its name have should in the last five year i.e.2021-22 to 2025-26 (c) executed in any one year the following minimum quantities of work (As per Govt CircularNo.PW 60 CRM 2021 Bengaluru Dtd.08.11.2021 1)Earth Work/Embankment/Filling-349.93 Cum 2)PCC/RCC-34.42 Cum 3)TMT Steel-1.96 tonne 4)SSM/BBM-38.69 Cum 5)Plastering-120.00 Sqm 6)Flooring-167.65 Sqm 7)Casting, Supplying, Erecting & Fixing of Statue-2344.00 Cum 8) MS grill-504.00 kg

Satisfactory Performance Certificate

Maximum of Civil Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. (Financial turnover of previous shall be given a weightage of 10% per year to bring them to the price level of the 2026-27

Others -- Statement on the Letter Head of the tenderer

Capabilities of Vendor

Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded

Others -- Biodata of the Personnel

Assessed Tender Capacity Shall be more than the Tendered Amount

Others -- Assessment on the Letter Head of this Tenderer

As per the Govt Order No: FD 263 EXP-12/2022 Bangelore Dated: 11.05.2022 as per condition no 3 relaxation of machinery up to Rs.300.00 Lakhs i.e. KW-3 & KW-4

Others -- No required documents

Financial Status

Latest income tax clearance certificate along with last five years balance sheet and profit & loss statement duly certified by the CA

Others -- Valid Income Tax returns for last 5 years

List of Financial Resources with Certificates

GST Registration

Liquid Assets and/or availability of credit facilities of not less than Rs.49.86 Lakhs (Credit Lines/Letter of Credit/Certificates from the Banks for meeting the fund requirement etc

Line of Credit

Others

Information of the works for which tender acceptance letters are received

Others -- Information in Format 6 and Letter of Acceptance

Information Litigation in which the Tenderer is involved

Others -- Information in Format 10

Name Address, Telephone No Fax No. and email ID of the Tenderers Bankers

Others -- Information on the Letter Head of the tenderer

List of existing commitments Value at 2025-26 price level, of existing commitments and on-going works to be executed during the next 12 months (financial commitment of previous years shall be given a weight of 10% per year to bring them to the price level of 2025-26) (Month wise commitment shall be furnished)

Others -- Statement on the Letter Head of the Tenderer

List of works for which tenders already submitted

Others -- Information in Format 7

Information on works which are yet to be completed

Others -- Information in Format 5 and Certificates in Format 5

Banker Details for reference

Others -- Banker Details

The proposed methodology and programme of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of work as per technical specifications within the stipulated period of completion

Others -- CPM/PERT CHART

Part-2 Rs.1,00,000.00 EMD Shall be in favor of Executive Engineer, PWD Division. Yadgir and may be in the form of Bankers Cheque OR Demand Draft OR Pay Order in favor of Executive Engineer, PWD Division. Yadgir payable at yadgir to the Executive Engineer, PWD Division. Yadgir of Bank Guarantee in the prescribed format obtained form any Nationalized OR Scheduled Banks. The tenderer should upload scanned Original Bank Guarantee of Part-2 EMD the qualified

Others -- Scanned copy of Bank Guarantee

Constitutional or Legal Status of the Tenderer

PWD Registration Certificate (Class I/II/III/IV)

Fee & Financial Details

Tender Fee Amount

₹2,500

EMD Fee Amount

₹2 L

Important Dates

Last Activity

8 Jul 2026

Published

8 Jul 2026

Bid Opening

18 Jul 2026

Download Ends

13 Jul 2026

Pre-Bid Meeting

10 Jul 2026

BOQ Preview

•

JAGAJYOTHI BASAVESHWARA PUTHALI

•

Casting, Supply, Erecting and fixing of 9 feet height Bronze statue of Shree Jagajyothi Basaveshwara at Gurmitkal town in Yadgir Dist (excluding stone pedestal) and combined bronze weight and Structur...

•

PEDESTAL FOR JAGAJYOTHI BASAVESHWARA PUTHALI

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation

•

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse s...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 ce- ment : 2 coarse sand : 4 graded stone aggregate 20 mm nom...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Formwork, Centering & Scaffloding 8% For Isolated Footing

•

Formwork, Centering & Scaffloding 70% For Columns upto Plinth level

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Formwork, Centering & Scaffloding 50% For Plinth Beams

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Formwork, Centering & Scaffloding 70% For Columns above Plinth level

•

Formwork, Centering & Scaffloding 60% For Beams

•

Formwork, Centering & Scaffloding 50% For Roof Slab

•

Formwork, Centering & Scaffloding 3% For Sill

•

Electrification Work (For JAGAJYOTHI BASAVESHWARA PUTHALI)

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before...

•

Supplying heavy gauge PVC Conduit Pipe.dia.mm thick with suitable size bends,metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hook sand cement plaste...

•

Supplying and fixing PVC/metal conduit Deep junction box

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5 Sqmm (Phase&Neutral) & 1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (co...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

supplying 4mm thick white plastic plate and covering for junction boxes of size 110mm conduit using necessary machine screws.

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board

•

Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power Input: 220-240V 50 60Hz and Power fact...

•

Supplying and fixing retrofit type-PL- LED Lamp linear source with CCT 6500 degree K, CRI 70% efficacy 80 lumen per W. life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 and LM 80. T...

•

Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swive...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying ,fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

•

Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which a...

•

Supplying of multi function digital meter with three line back light LC type display for voltage, Current, frequency,Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP...

•

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired

•

Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)

•

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound

•

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

ELE SR 2023-24, (Page No- 52, ESCOMs SR 2023-24 ,) Vol 6 LABOUR CHARGE

•

Supplying & fixing of Porcelain fuse channel with cut out onexisting wooden/panel using necessary nuts, bolts andwashers.

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

NIJASHARANA AMBIGARA CHOWDAYYA PUTHALI

•

Casting, Supply, Erecting and fixing of 9 feet height Bronze statue of Nija Sharana Ambigara Choudayya at Gurmitkal town in Yadgir Dist (excluding stone pedestal) and combined bronze weight and Struct...

•

PEDESTAL FOR NIJASHARANA AMBIGARA CHOWDAYYA PUTHALI

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation

•

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse s...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Formwork, Centering & Scaffloding 8% For Isolated Footing

•

Formwork, Centering & Scaffloding 70% For Columns upto Plinth level

•

Formwork, Centering & Scaffloding 50% For Plinth Beams

•

Formwork, Centering & Scaffloding 70% For Columns above Plinth level

•

Formwork, Centering & Scaffloding 60% For Beams

•

Formwork, Centering & Scaffloding 50% For Roof Slab

•

Formwork, Centering & Scaffloding 3% For Sill

•

Electrification Work (For NIJASHARANA AMBIGARA CHOWDAYYA PUTHALI)

•

Supplying and fixing PVC/metal conduit Deep junction box

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

•

supplying 4mm thick white plastic plate and covering for junction boxes of size 110mm conduit using necessary machine screws.

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board

•

Supplying ,fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

•

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired

•

Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)

•

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound

•

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound

•

ELE SR 2023-24, (Page No- 52, ESCOMs SR 2023-24 ,) Vol 6 LABOUR CHARGE

•

Supplying & fixing of Porcelain fuse channel with cut out onexisting wooden/panel using necessary nuts, bolts andwashers.

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

36253 KW-4 BID_STATUE corrected.docx

Others - BID DOCUMENT • 1.48 MB

36253 Short Term Tender Permission Letter.jpeg

Others - Short Term Tender Permission Letter • 0.17 MB

Ready to Participate?

Download all tender documents and submit your bid