Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAccepted-AOC 48 CHANDAK LAYOUT GHAT ROAD NAGPUR | NAGPUR | L1 | Accepted-AOC LOWEST BIDDER. | |
| 2 | L2₹38.5 L+₹16,081 (0.42%)Rejected-AOC MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L2 | Rejected-AOC NOT LOWEST BIDDER. |
Tender Value
₹43.6 L
EMD Value
₹87,300
Closing Date
7 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL SANJAY KUMAR, GE
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
AADN AND ALTN TO 22 P and S BUILDING AT NAGPUR
2023_MES_587121_2
8596
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹87,300
4 Sept 2023
12 May 2023
14 Jun 2023
12 May 2023
7 Jun 2023
19 May 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, in hard/ dense soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, and getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed.
Material and labour for removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.
Material and labour for cement concrete type D2 1:4:8 (40mm graded agreggate) in foundations, filling and mass concrete complete all as specified and as directed.
Material and labour for rough finished surfaces of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
Material and labour for rough finished surfaces of formwork to square, rectangular or polygonal sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.
Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.
Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
Material and labour for M25 cement concrete (20mm graded stone aggregates) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
Material and labour for RCC M25 ( using 20 mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified complete all as specified and as directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item No 13 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Material and labour for RCC M25 ( using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and labour for RCC M25 (using 20 mm graded stone aggregate) in roof beams Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
Material and labour brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and as directed.
Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.
Material and labour rendering 5 mm thick on Ceiling in CM (1:3) finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Material and labour rendering 15mm thick on other than fair finish of bricks/concrete/stone surface of wall in CM (1:4) mixed with WPC and finished the surface even and smooth without using extra cement complete all as specified and directed.
Preparation of newly plastered or un-plastered surfaces of walls, and applying two coats of cement based paint over a coat of primer complete all as specified.
Material and labour for rendering 10mm thick in CM (1:6) in brick surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distempr over a coat of primer complete all as specified and s directed.
Material and labour for preparation of old plastered ceiling surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsion complete all as specified and directed
Material and labour complete removal of existing treatment of wall surfaces and applying two coats of distemper oil emulsion complete all as specified and directed
Material and labour preparation of old plastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed
Material and labour preparation of old plastered external wall surfaces with complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed complete all as specified and directed
Material and labour preparation of old plastered external wall surfaces and applying one coats of cement base paint complete all as specified and directed
Material and labour for 3mm thick wall care putty on wall complete all as spcified
Material and labour for preperation of old painted surfaces, one coat of Synthetic Enamel paint on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.
Material and labour for preparation of old plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed
Material and labour preparing new steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of red oxide primer, complete .
Taking down carefully existing bitumen tar felt including plaster , and roughening the surface ,wire brushing , cleaning and washing with water etc, removing the rubbish to a distance exceeding 500m but n.exc 1Km & depositing where directed .
All as per item No 34 above but on vertical surfaces like parapets except brick/ coba tiling etc all as specified and directed.
Material and labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces including mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even. Note;- The quoted rate shall deemed to be included rate for removing old plaster completely
Material and labour for roof treatment on RCC roof slab complete as mentioned below, all as specified and as directed:-
(i) Cleaning the concrete surfaces of RCC roof slab as obtained after demolition of cement tiles,/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment of pressure grouting shall be operated at the required locations). (iii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (iv) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface. (v) APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch', application method all as per manufacturer's instructions. ( vi) APP modified polymeric membrane shall be covered with bitumenous based aluminium paint @0.2 kg/sqm in two coats complete all as specified and as directed.
Material and labour PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in filleting and benching slightly rounded off etc. Including necessary form work, if any, complete all as specified and as directed.
Material and labour for grouting in roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal. After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions and as directed. Note:- This item shall be operated at the required location of leakage/ seepage/ dampness.
Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and as directed.
Material and labour for providing 75mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as plinth protection / path finished the surface even & smooth with out using extra cement complete all as specified.
Dismantling water tanks 500 ltrs to 1000 ltrs complete all as specified and as directed.
Supply and Fix rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
Material and labour rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Taking up or down steel tubing 15 mm bore and connections complete all as specified and as directed.
All as per item No 45 above but 20 mm bore
Supply and Fix GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 15mm including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed
All as per item No 47 above but 20 mm bore
Material and labour for concrete bed in P.C.C ( 1:4:8), type D-2 (using mm graded aggregate ) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for 150mm dia pipes all complete all as specified and as directed.
Material and labour for Reinforced concrete pipes, class NP2, dia 150mm laid and jointed complete with collars as in drain or sewage disposal complete all as specified and as directed.
Supply and fix RCC bends, laid and jointed complete all as specified and as directed.
Supply and fix RCC single 'Y' junctions laid and jointed complete all as specified and as directed.
Supply and Fix 150 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed.
All as per item No 53 above but 110 mm bore
Supply and fix in repair 110mm PVC (SWR) bends of any radius complete all as specified and as directed.
All as per item No 55 above 75 mm bore all as specified and directed.
Supply and fix in repair 10 litres capacity PVC valveless, syphonic action type, slim body fancy flushing cistern, low level, white, with inlet valve, float valve and handle including removal of old one all as specified and as directed.
Supply and fix in repair vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor all as specified and as directed.
Supply and fix in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed.
Supply and Fix in repair vitreous china wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling , PTMT 32mm dia brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve with PTMT nuts of length 450mm etc complete all as specified & as directed
Supply and fix PVC, 32 mm dia polythelene of low density of pressure rating 6kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and as directed
Supply and fix brass chromium plated hand shower (Health faucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer ) of Make: Jaquar/ Prayag/ Hindware
Supply and fix 15mm dia 2 way bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as specified & directed Make: Jaquar /Prayag/ Hindware
Supply and Fix PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified.
Supply and fix bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete ll as specified and directed.
Material and labour for repairs to ends of chajja by removing old loose concrete material, cleaning the reinforcement and finishing the surface by applying the epoxy based resin of manufacturer Chouksey/ STP/ SIKA and make good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with appoxy coating and applying two coats of weather proof emulsion paint over a coat of primer up to 600 mm depth and 100 mm thickness including necessary scafolding and formwork as required at site etc. complete all as specified and as directed .
Material and labour for integral water proofing compound ISI Marked complete all as specified and directed.
Material and labour for cutting openings, through brick walls for door, window and other openings or enlarging existing openings built in cement mortar. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.
Supply and fix pressed steel frames for chowkat of size 105x60mm with hinges ,100mm size (3 Nos each choukhat) with one or more rebates including necessary fixing lugs, lock strike plate, etc all as specified and as directed.
Supply and fix pressed steel frames for chowkat of size 165x60mm with hinges ,100mm size (3 Nos each choukhat) with one or more rebates including necessary fixing lugs, lock strike plate, etc all as specified and as directed.
Material and labour for framed work such as grills,gratings,etc with ends of bar shouldered and or rivited or forged into spikes framed guarded bars barred iron doors ladders framed balusters walkways railings framed work of water tank stand similar work confirming-290 Gde-E-165 complete all as specified and directed.
Supply and fix aluminium framed doors/Fixed frame works with shutters glazed including necessary joining cleats,03 nos Aluminium Hinges(100mm) in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass using powder coated aluminium sections of approved make confirming to IS.(Glazing and pre laminated particle board shall be measured and paid seperately) complete all as specified and directed .
Supply and fix aluminium Framed windows with frame any pattern fixed, sliding,hung Two Track/Three Track) using power coated alumunium sections of approved make necessary joining cleats,in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass ,using powder coated aluminium sections of approved make confirming to IS.(Glazing and stainless steel/PVC wiremesh shall be measured and paid seperately) complete all as specified and directed .
Material and labour for prelaminated particle board 12 mm thick, exterior grade, prelaminated both sides with decorative choice laminations as per site requirement fixed with aluminium frame work as in door/fixed frame work /partition complete all as specified and directed .
Supply and fix door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.
Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.
Supply and fix 4 levers bbrass mortice lock for aluminium door, size 100 mm all as specified and directed.
Taking down chowkats with shutters (without taking off shutters from the frame) exe 1.5 sqm but n.exc 4sq.m all as specified and directed.
Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and teel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
Material and labour for aluminium alloy, anodised, sliding door bolt (250mm long) with hasp,nstaple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-uminium alloy and fixed complete all as specified and as directed
Material and labour for floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
Supply and fix stainless steel butt hinges medium weight size 100mm long complete all as specified and as directed.
Supply and fix aluminium handles cast type anodised size 150 mm long complete all as specified and as directed.
Supply and fix aluminium anodiesed barrel tower bolt of extruded section size 200 mm complete all as specified and as directed.
Material and labour PCC (1:3:6) type C-1 for PS Frame filling all as specified and as directed.
Supply and fix stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.
Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.
Supply and fix sheet glass ordinary quality 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.
Supply and fix sheet glass ordinary quality obscured or frosted on one side 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.
Material and labour PCC, (1:2:4) Type B-1(20mm graded stone aggregate) 25 mm thick as in floor all as specified and directed.
Material and labour for Kota stone flooring 20-25mm thick over and including 20mm screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing all as specified and directed.
All as per item No 96 above but as in skirting on verticle surfaces of wall over screed bed 10mm thick in CM (1:4) for kota stone all as specified and directed.
Dismantling of floor, hearth or wall tiling, granite platform/ kota stone flooring including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Material and labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado complete al; as specified and as directed.
Material and labour for glazed ceramic coloured tiles in vertical surface 350x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado complete all as specified and as directed.
Material and labour for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors (joint free )etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor finishes complete all as specified and as directed.
Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
Supply and fixing flush shutters, 35 mm thick, solid core construction, with blockboard core and plywood face panels, commercial type on both sides complete all as specified and as directed.
Material and labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
Supply and fix mild steel screw bolts(Machine made) with hexagonal or square head at one end and screwed the other end n exc 5 cm long and diameter of neck exc 5 mm but n exc 10 mm dia all as specified and directed.
All as per item No 105 above but length of bolt exc 10cm and n exc 15 cm long and dia exc 16 mm but not exc 20mm complete as specified and directed.
All as per item No 105 above but length of bolt exc 22.5cm and n exc 30cm long
Material and labour for mild steel plates (Plain or chequred) channel square cut or not chequred (ordinary and counter sunk) forming holes, sithout any attachment for Fe-410-W Gde-E 250 quality 'A' complete all as specified and directed.
Supply and fix pre-painted galvalume aluminium zinc coating GI bassed corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550Map as in roof covering/cladding to wall,fixed with self tapping screw all as specified and directed.
All as per item No 109 abovr but Plain sheet as in ridge of roof covering
Supply and Fix Harrison curtain rails, 19/20mm dia, fancy type powder coated aluminium alloy with fixing brackets, stops, rollers etc including taking down old one all as specified and as directed.
Material an labour hardcore of gauge n.exc 63mm deposited ,spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour 75mm thick cement concrete using (40mm graded aggregate) type D-2 (1:4:8) as in sub-base complete all as specified and directed.
Material and labour cement concrete type C2 1:3:6 (40mm graded agreggate) in foundations, filling and mass concrete as specified and directed.
Material and labour for sand coushioning below interlocking paver block as specified and directed.
Material and labour machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with greay and white with pigment as specified and directed.
Material and labour for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) Gypboard ceiling (conforming to IS-2095-1982) manufactured by M/s India Gypsum false ceiling using GI perimeter channel of size 20mm (one flange) x 27mm (web) x 30mm (other flange) x 0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channels (of size 5mm x 45mm x 15mm x0.9mm thick) @ 1220mm centre to centre with ceiling angle (of size 25mmx10mmx0.55mm thick) fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55mm thick having Knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm) using connecting clip and in direction perpendicular to intermediate channel @ 300 mm centre to centre and Gypboard fixed to ceiling section using 25mm drywall screws @ 230mm centre to centre complete all as per manufacturer’s instructions and as directed.Including 2 coats of OBD over a coat of 1mm thick putty and taking down of old false ceiling complete all as specified and directed.
Material and labour for dampness rectification on wall Area :- Surface Preparation: Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level. Coating: Applying two coats of Dr Fixit Pidifin 2k/Equivalent (a two component, anti-fungal, acrylic waterproofing coating) over cleaned surface with brush. And allowing it to dry for 24 hours. Finishing the surface: Applying plaster 15 mm thick in CM 1:4 over the treated surface with waterproofing compound to provide proper finish proper curing of plastered surfaces, preparation of plastered surfaces and applying 2 coat of cement base paint over a coat of primer.
Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified and directed.
Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and directed.
Material and labour for sub main wiring (concealed) complete with four single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Note: 5 run of 6 sqmm&one run of PVC conduit shall be measured as single unit as specified and directed
Material and labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 4 sqmm&one run of PVC conduit shall be measured as single unit as specified and directed
Material and labour for sub main wiring (Surface) complete with two single core 1.5 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit/Caping casing heavy grade and conduit accessories including 1.5 sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete all as specified and directed. Note: 3 run of 1.5 sqmm&one run of PVC conduit shall be measured as single unit as specified and directed
Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and directed.
Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and directed.
(a) One light point controlled by one switch
(b) One fan point controlled by one switch
(c) One switch socket outlet modular type 3 pin 6 amp on same board.
All as per item No 125 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.
All as per item No 125 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.
Material and labour for cutting & taking out the existing surface/sunken box/switch plate with switches/sockets and replacing with the following complete all as specified and as directed .
(a) Modular metal flush box with modular cover plate with frame 1/2 Module
(b) Modular metal flush box with modular cover plate with frame 3 Module
(c) Modular metal flush box with modular cover plate with frame 4 Module
(d) Modular metal flush box with modular cover plate with frame 6 Module
(e) Modular metal flush box with modular cover plate with frame 8 Module
(f) Modular metal flush box with modular cover plate with frame 12 Module
Note for Item No. 119 to 128.6 :- (i) The disturbed surfaces of wall for concealing box/ wiring shall be making good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. (ii) The rate quoted for point wiring shall deemed tobe included the cost of making good.
Taking down old unserviceable and supply & Fix new LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V. Make :CG Cat Part No. LSTS-25-CDL or equivalent in Bajaj/ Wipro. Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect.
Taking down old unserviceable any type fittings and Supply & Fixing new Decorative LED light 36 watt recessed mounting type complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified and directed. Make : CG Cat Part No. LCTLRN-36-FO-CDL or equivalent in Bajaj/ Wipro.
Taking down old unserviceable and Supply & Fix new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/ Wipro.
Taking down old unserviceable and Supply & Fix new Surface mounting LED Luminaries 2ft and 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and directed . Make :CG Cat Part No. LCTL-10-CDL or equivalent in Bajaj/Wipro.
Taking down old unserviceable any type fittings, Supply & Fixing new Decorative LED light 18 watt round/square surface mounting flat panel type complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified and directed. Make : CG Cat Part No. LCDSPLN-R-18W-CDL or equivalent in Bajaj/Wipro.
Taking out the existing any type fittings from ceilings and Supply and Fix new 12 Watt LED round/square recessed flat panel light pearl model with locking arrangement in ceiling with a nominal system lumen output of 1200 lumens and a minimum system efficacy of 100 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70 all as specified and directed. Make : CG Cat Part No. LSCRM-12W-CDL/NW or equivalent in Bajaj/Wipro.
Taking down old unserviceable and supply & Fix 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and directed. Make : Legrand Cat No. 675530 or equivalent in Anchor/ Bajaj/ Havells/ Usha
Taking down old unserviceable and supply & six switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and directed. Make : Legrand Cat No. 675501 or equivalent in Anchor/ Havells/ L & T
Taking down old unserviceable and supply & fix socket modular type single pole one way 6 Amps multistandard 250 volts all as specified and directed. Make : Legrand Cat No. 675550 or equivalent in Anchor/ Havells/ L & T
Taking down old unserviceable and Supply & Fix for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and directed. Make : Leader/ Anchor / Havells/ Panasonic
Taking down old unserviceable and supply & fix socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and directed. Make : Legrand Cat No. 675555 or equivalent in L & T/ C&S Electric/ Seimens
All as per iotem N o 139 above but 16 Amps,one way with indicator, 1 module,240 volts Make : Legrand Cat No. 675513 or equivalent in L & T/ C&S Electric/ Seimens
Taking down old unserviceable and supply & fix power unit for upto 2 ton AC and geyser up to 3.5 KW modular type, 4 module,240 volts all as specified and as directed by EIC. Make : Legrand Cat No. 675558 or equivalent in L & T/ C&S Electric/ Seimens
Taking down old unserviceable and Supply & Fix sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 with metal double door, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, all as specified and as directed. Make : Legrand Cat No 507670 or equivalent in L & T/ C&S Electric/ Seimens
Taking down old unserviceable and Supply & Fix MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408683 or equivalent in L & T/ C&S Electric/ Seimens
Taking down old unserviceable and Supply & Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507611 or equivalent in L & T/ C&S Electric/ Seimens
Taking down old unserviceable and Supply & Fix MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed. Make : Legrand Cat No. 408617 or equivalent in ABB/Seimens.
Supply and fix sheet metal enclosures for SPN DB's 2 way, 240 volts, as per IS-8623 all as specified and as directed.
Taking down old unserviceable and Supply & Fix MCB SP 06-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed.
Supply and Fix Wall mounted fan of size 16" plastic body including all acessories and connected material complete all as specefied and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core all as specified and as directed.
Material and labour for High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of size 25 mm dia laid in trenches for passing of LT cable complete all as specified and directed.
Excavation in trenches in hard/dense soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables and getting out of excavated material complete all as specified and directed .
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the pipes have been laid and tested complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed
Supply and fix thermoplastic cable junction boxes IP 65 with metric knockout for cable entry with terminal of size 130 x 130 x 77 mm with MS clamps, nut bolts, washers and glands suitable for 6 sq mm 02 core cable all as specified and directed . Make- HANSEL/ Neptune/ Sintex
Supply and fix rigid non-metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc all as specified and directed.
Taking down carefully existing GI strip of any size complete all as specified and directed.
Fixing only GI strip properly by providing insulators etc. complete all as specified and directed.
Supply & fix GI strip of size 25x4 mm including necessary insulators etc. complete all as specified and directed.
M/s Prakash R. Verma
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .