Providing Operational Improvement of Improved Water Supply Service Levels of Water Supply Scheme Mehta Block Sangat District Bathinda Under 2A i

Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km a) Jalalabad Sand (Av. Lead 90 Km) Up to 40 km (Item No. 5.2 (i)

41 km to 60 km

61 km to 90 km

d) Filter Media (Av Lead 315 Km.) Up to 40 km

41 km to 60 km

61 km to 150 km

151 km to 315 km

Removing Doors and windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. A) doors of area 3 sqm and below. (Item No. 8.26)

b) windows of area 3 sqm and below.

Scraping c) Cement Plaster (Item No. 8.31)

12.5mm C.P. 1:2. (Item No. 15.7)

12.5 mm thick cement plaster 1:4. (Item No. 15.9)

Plastering on underside of ceiling 10 mm thick cement plaster 1:3 (Item No. 15.43)

Cement pointing 1:2 deep variety.. (Item No. 15.59)

White washing (Three coat) (Item No. 16.3)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade. (Item No. 16.14)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. a) With Special Quality Paint (Item No. 16.18)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. a) With Special Quality Paint (Item No. 16.21)

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. a) Panelled, glazed or glazed and panelled (Double leaf) ii) 35 mm thick (Item No. 17.10 (iii)

Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge thick steel sheet of the specified section (standard design latest) including iron lugs iron hinges, confirming to PWD specifications including bolts for fixing stops, lock etc. complete. a) Doors and windows frame of size 118 mm x 60 mm wide single rebate weighing 3.43 kg per meter. (Item No. 18.24)

Brick lining 7.5cm thick in 1:3 cement sand mortar over 12.5 mm thick baseplaster 1:6 over dressed sub-grade including laying, trenching and jointing of low density polyethylene. On side slope . (Item No. 19.27 (b))

Providing & fixing CI/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts slucie valves ISI marked, 14846-2000, including jointing, testing & cost of Nut, bolt & insertion sheet all carriage complete (with the approval of Engineer-in-charge). A) Class PN-1 as per ISI C) 150mm i/d Sluice Valves Flanged (Item No. 28.27)

d) 200mm i/d Sluice Valves Flanged

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :- a) Top layer :- Fine sand screened, cleaned ans washed and graded (effective size 0.2 to 0.4 mm with uniformity co-efficient 2.00 to 3.00) from Pathankot or other approved source. (Item No. 28.51)

Providing & Fixing Orient Electric Apex-FX 1200mm Ceiling Fan (White) & Regulator etc. complete. (Item No. NS)

Providing & Fixing Crompton Slim Ray 18-Watt LED Tube Light (Cool Day Light) complete. (Item No. NS)

Providing & Fixing Syska SSK-SRL 15W B22 LED Bulb (Cool Day Light) complete. (Item No. NS)

Taking out filter media (top to bottom layer) from filter beds, washing & replacing the same after washing in filter beds etc. complete in all respect. A) Top Layer (Item No. NS)

b) 2nd Layer

c) 3rd Layer

d) 4th Layer

e) Bottom Layer

Washing the false floor slabs with brushing & cleaning the cross drains etc. complete in all respect. (Item No. NS)

Providing & fixing Aluminium Ladder inside the tank should consist of 60 cm wide ladder make from aluminium section LS 974 size, 66.68 x 31.75 x 4mm, weight 1.27 kg/mtr with steps made out of aluminium section H, SP 3024 Size 35 x 16.70 x 1.60 mm, weight 0.362 kg/mtr to be fixed one side in the wall & other side in the bottom slab of Clear Water Tank. (Item No. NS)

Dismentaling existing steel ladder for water tank of 1 No. OHSR 150 cum capacity & placeing the same near pump chamber at site etc. Complete (Item No. NS)

Providing & fixing Aluminium Ladder inside the tank should consist of 60 cm wide ladder make from aluminium section LS 974 size, 66.68 x 31.75 x 4mm, weight 1.27 kg/mtr with steps made out of aluminium section H, SP 3024 Size 35 x 16.70 x 1.60 mm, weight 0.362 kg/mtr to be fixed one side in the top dome and other side in the bottom dome including liffiting from ground to vessel of the OHSR 150 Cum Capacity etc. (Item No. NS)

Repair/ Replacement of Control Panel for 10 BHP & 25 BHP Motors. (Item No. NS)

Providing house hold connection laying, jointing, fixing, testing MDPE Pipes (as approved by Engineer-in-charge) including cost of excavation, refilling , CI bib cock as per IS : 210 with stainless steel spindle, 20mm o/d MDPE Pipe 2.00 mtr. 15mm i/d GI Pipe 2.50 mtr.(length on average basis) 3" i/d clamp, GM Ferrule ISI marked connection of 15 mm i/d ferrule medium specials such as tees, bends, sockets, elbows, nipples (100 mm & 150 mm) union couplings, GI hooks etc. & C.I bib cock as per IS:210 with stainless steel spindle of approved make, MDPE Pipe lines laid in the ground or inside buildings, cutting, threading, making hole in wall and testing in trenches in the ground all materials should be approved make (to the approval of Engineer-in-charge) Complete Job in all respects including cost of carriage. (Refer CSR item No. 28.1, 28.36a, 28.34b, 30.65b (i) & NS Items) No. of Connections on existing Pipe Line

Repair of existing Water Connections (Item No. NS)

Credit of old Sluice Valve