Up-gradation of PHC Mokhra in Distt. Rohtak. (Special repair to E.I. only) Recall

Amount

(a) Main Switches 31.12 Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections.

(xv) Triple pole switch with neutral link 63 amp. 415 Volts Cat-B.

31.13 Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide.

(ii) Size 40 mm x 40 mm x 6 mm.

31.14 M.S.Sheet .

(i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (a) Miniature circuit breakers of 9 KA breaking capacity.

(ii) SP MCB 6 amp. to 32 amp.

(ii) TPN MCB 6 amp. to 32 amp.

(iii) TPN MCB 40 amp. to 63 amp.

31.18 (M) Supply and erection of Fittings and Accessories.

(xi) Bakelite angle / straight button holder large size.

(vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

(ix) Bell push flush type ( without flexible wire ) in existing sheet.

(v) Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick.

(vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

31.21 (P) Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required.

(xxi) Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

(xxii) Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

(xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 meter below ground level complete including digging refilling of the trench with jointing etc. (c) PVC pipe 65 mm dia.

31.22 (i) (Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

(xi) Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required.

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections .

(xxv) 25 Sq. mm 3.5 Core Ard. Cable .

31.38 Wiring only in 1.5sqmm PVC insulated copper conductor cable in existing conduit pipe and MS box covered with 5 mm thick Bakelite sheet including cost of switch, wall socket, ceiling rose etc.

(I) Fan Point

(b) Medium Point

(c) Long point

(II) Light Point

(a) Short Point

(b) Medium Point

(c) Long Point

(VI) Call bell point (c) Long point

(VII) 3-pin 5 amp. Plug point including earthing the 3rd pin etc. (b) Medium Point

(c) Long point

(VIII) 3-pin15 amp. Plug point with 4 sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. (c) Long point

31.40 S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe.

(i) Cable size 1.5 sqm(3/0.81 mm)

(iii) Cable size 4 sqm(7/0.85 mm)

(v) Cable size 10 sqm(7/1.35 mm)

31.41 S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (vi) 8-way,TP&N (Horizontal)(8+24)

31.44 S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. (a) 20mm dia

M.R. ITEMS MR-1 S/E of 18 W indoor LED Tube fitting with batten and tube, decorative ultra slim liniare LED lighting fixture with extruded poly carbonate, environmental friendly, energy effiecent completed including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. (Make:- Philips/ Havell's/ Crompton.)

MR-2 Supply and erection of AC Ceiling fan 48" without regulator complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Bajaj / Orient/ Khaitan.

MR-3 Supply and erection of Exhaust Fan 300 mm Industrial Heavy duty 900 RPM of of approved make list including the cost of all petty material required to complete the job upto the entire satisfaction of the Engineer -in-charge of the work.

MR-4 S/E of water cooler in built R.O. of cooling capacity 60 Ltr. / hr. and storage capacity of 80 Ltr. Along with water purifier + R.O. with R.O. capacity of 50 LPH with R.O. membrane (Thin film composite) 80GPDx4, Power consumption 700±10% along with M.S. stand and all accessories as supplied by the manufacturer complete in all respect. Make & Model:- EUREKA FORBES Chill R.O. 80 SS

N.S - 5 Supply & erection of M.S. Box made of 16 Gauge of size d 8" x 10" x 4" covered with3 mm thick bakelite sheet white colour of ISI Mark fixed by means of 4 Nos. brass screws with cost of 1 No. 15 Amp. multi socket of ISI Mark and 15 Amp. switch and 3 Nos. 5 Amp. multi-socket with 5 Amp. switches of ISI Mark including fixing the M.S. Box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work.