Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC R H NO 14 ADITYA PALACE PATOLE MALE B H SUMAN HOSPITAL JAI BHAWANI ROAD NASIK ROAD 422102 | NASIK | NASHIK | MAHARASHTRA | 422102 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹31.8 L+₹1.3 L (4.15%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹33.1 L+₹2.7 L (8.69%)Rejected-Finance | L3 | Rejected-Finance Not lowest |
Tender Value
₹38.8 L
EMD Value
₹77,500
Closing Date
8 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006
As per Tender Documents
2022_MES_559563_1
GE/NRC/8935/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹77,500
Yes
20 Dec 2022
22 Oct 2022
10 Dec 2022
22 Oct 2022
8 Dec 2022
24 Nov 2022
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches in any type of soil, n. exc. 1.5m wide and n. exc. 1.5m deep and getting out complete.
Excavation in trenches,not exc 1.5m wide and not exc 1.5m in depth for foundation in hard/dense soil and getting out complete all as specified and directed.
Excavation in trenches,not exc 1.5m wide and not exc 1.5m in depth for foundation in hard/dense soil and getting out complete all as specified and directed.
Excavation in post holes (or similar holes) each in not exc 0.5 cum getting out and removing surplus soil to a distance in exc 50 mm and making good surface in soft/loose soil complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete and sub base of floor complete all as specified and directed.
M&L for PCC(1:4:8) type D-2 using 40mm graded stone aggregate in foundation mass concrete and filling complete.
M&L for 50mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base , surface finished even and fair without using extra cement complete.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in alternate ways, surface finished even and smooth using extra cement complete.
M&L for form work to sides of concrete foundations,footings bases of coloumns raft and raft beams,sides and soffits (if any) of foundation and plinth beams, and similar work,vertical or to batter for rough finished surface of concrete complete all as specified and directed.
M&L for form work to sides of pillars, posts,struts,piers,columns etc or to batter for rough finished surface of concrete complete all as specified and directed.
M&L for form work to sides of pillars, posts,struts,piers,columns etc or to batter for rough finished surface of concrete complete all as specified and directed.
M&L for form work to sides of concrete lintel beam,roof beam soffit of floor, cantilevers, shelves, over hangs and similar work, to batter for rough finished surface of concrete complete all as specified and directed.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for form work to edges of rough finished surfaces of concrete flats, treads, breaks in floors, windows cills,concrete railing, openings in concrete walls floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20 cm wide complete all as specified and directed.
M&L for formwork to chajjas including edges or to batter for rough finished surfaces of concrete complete all as specified and as directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for foundations, including rafts, footings, foundation beams,plinth beams, bases for column etc using 20mm graded aggregates all as specified and directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for Columns, pillars, piers, posts and struts etc using 20mm graded aggregates all as specified and directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for beams, cantilevers, bressummers, lintels over 1.5m span etc using 20mm graded aggregates all as specified and directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for chajja etc using 20mm graded aggregates all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases fo columns, etc,basement s;abs, under-reamed piles and mass concretecomplete all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases fo columns, etc,basement s;abs, under-reamed piles and mass concretecomplete all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) lintel beams, roof beams, cantilevers ,chajjas bressumers, lintels over1.5m span complete all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in columns, pillars piers, posts and struts complete all as specified and directed.
S&F Deformed steel bars TMT 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0,9 mm dia or securing with clips quality confiring to Fe-410 complete all as specified and directed.
S&F Deformed steel bars TMT 6-8 mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0,9 mm dia or securing with clips quality confiring to Fe-410 complete all as specified and directed.
S&F Deformed steel bars TMT 5mm dia and over upto and incuding 10 mm dia in stirrups tie, spacers and binder complete all as specified and as directed.
Returning, filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for moorum filling under floors or paving laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L for Hardcore Broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface
M&L for 25 mm thick PCC 1:2:4, type B-1 as in flooring complete all as specified and as directed.
M&L for Screed bed or bedding layer of cement morter 15 mm thick for laying floors finishes in cement mortar 15 mm thick for laying floors finishes in CM1:6 complete all as specified and as directed.
M&L for Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm coloured non skid ceramic tiles as in floors set and jointed in neat cement slurry and pointed in coloured cement to match.complete all as specified and as directed.
M&L for 7 to 8 mm thick non skid coloured ceramic tiles,area of each tile exc 0.18 sqm but not exc 0.38 sqm,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for 7 to 8 mm thick non skid coloured ceramic tiles as in skirting ,riser to steps ,cut out of tiles,area of each tile exc 0.18 sqm but not exc 0.38 sqm,set and jointed in neat cement slurry and pointed in white r coloured cement to match complete all as specified and as directed.
M&L for non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.
M&L for 10 mm thick backing coat in cm 1:4 on vertical surfaces for fixing of dado/skirting complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match
M&L for Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with sub class 'B' modular brick straight or curved on plan exc 6M mean radius built in cement mortar 1:6 complete.
M&L for Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall in cm 1:4 complete all as specified and as directed.
M&L for 10 mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) complete all as specified and directed.
M&L for 15 mm thick cement plaster in CM 1:4, on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) complete all as specified and as directed.
M&L for rendering 5mm thick on concrete ceilling surfaces in CM 1:4 complete all as specified and directed.
M&L for 12 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete.
M&L for rendering 15mm thick in CM 1:4 on roof surfaces finished even and smooth with extra cement including waterproofing compound complete all as specified and directed. Note: water proofing compound shall be measured separately.
Supply only integral water proofing compound ISI marked complete all as specified and as directed.
M&L for applying a birla wall care putty on wall as per manufacturer"s instruction complete all as specified and as directed.
M&L for preparation of new plastered surface and applying two coat of oil bound distemper over a coat of primer.
M&L for preparation of new plastered surface and applying three coats of white wash on internal walls complete all as specified and as directed.
M&L for preparation of new plastered surface and appliying two coat of cement base paint over a coat of primer on walls, pillers cornices complete all as specified and as directed.
M&L for preparation of newly plastered surfaces and apply three coats of white wash on ceilings/roof projection complete all as specified and as directed.
M&L for reparing of newly plastered/concrete surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces
M&L for 18 to 20 mm thick Granite (Telephonic black/Ruby red) work (table rubbed and polished) as in partition for urinals including cutting necessary chesses into brick wall,rounding edges fixed in CM 1:4 complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple or fixed in alumium frames.complete all as specified and as directed.
M&L for EWC pedestal pattern ,concealed S or P trap,white incl 32 mm dia low or high density flush pipe for pedestal pattern WC and plastic water closet seat cover,flat with hinging devices.complet all as specified and as directed.
S&F PVC Valve less, syphonic action type,flushing cistern of 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets complete including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cisterns compelete all as specified and as directed.
S&F Vitreous china bowl urinal flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including discharge pipe of PVC 32mm dia, fixed in repairs, complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:12 and finishing cement concrete surfaces even and smooth without using extra cement with and including necessary formwork to divide the area in panels finishing exposed edges fair and rounding or chamfering of exposed edges where directed and providing 10 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand complete all as specified and as directed.
S&F 150 mm long Aluminium barrel tower bolts extruded section complete all as specified and as directed.
S&F 125 mm butt hinges,extruded Aluminium alloy with galavanised mild steel hinges pin,anodised and fixed type C-21 complete all as specified and directed.
S&F aluminium alloy anodised sliding door bolts 250mm with hasp and staple (bolt type) & fixing clip of cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy all as specified & directed.
S&F Cold rolled MS butt hinges of size 125 mm , medium weight fixed to door frame complete all as specified and as directed.
S& F Aluminium (minimum 50 micron powder coated) frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Anodised aluminium window and ventilator shutters, sliding type , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings ,concealed type PVC push lock one number at each end shutter,2 Nos PVC roller with SS ball bearing in every shutter,MHS aluminium concealed sliding window handle complete all as specified and as directed.
S&F extruded aluminium alloy handles,150 mm fabricated type anodised complete all as specified and as directed.
S&F 110/110 PVC(SWR) P trap
M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/trenches as in soil pipe complete all as specified and directed.
S&F for 110 mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and as directed.
M&L for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as in soil pipe complete all as specified and as directed.
S&F 110mm PVC(SWR) bends any raidius complete all as specified and as directed.
S&F 75 mm PVC(SWR) bends any raidius complete all as specified and as directed.
S&F 110 mm PVC(SWR) bends with access door complete all as specified and as directed.
S&F 75 mm PVC(SWR) bends with access door complete all as specified and as directed.
S&F 75 mm PVC (SWR) vent cowl complete all as specified and as directed.
S&F 110 mm PVC (SWR) vent cowl complete all as specified and as directed.
M&L for PVC (SWR) floor trap dia of outlet 75mm with grating incl jointing with solvent cement.Complete all as specified and as directed.
S&F PVC gully trap 125/10 mm setting and jointing in solven cement. Complete all as specified and as directed.
S&F 15 mm bore fancy type,chromium plated,cast copper alloy,with long shank and cup concealed type stop valves,screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore pipe.Complete all as specified and as directed.
M&L for high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 50mm suitable for cable protection complete all as specified and directed.
S&F fancy Bib taps cast copper alloy,chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore.complete all as specified and as directed.
S&F PVC connection 15 mm size and length 600mm complete all as specified and as directed.
M&L for Counter wash hand basin of size 580 x 440 mm mounted on granite and cuddappa with M&L for granite platform of size 0.90 x 0.55 m rested on 30 to 35 mm thick cuddappa stone slab and two granite supported on tiled wall supported edges rounded and chamfered complete job all as specified and as directed by Engr-in-charge.
S&F for Pillar cock, facy type ,swan neck type long body,chromium plated, screwed dowwn,high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts, screwed for iron pipe/CPVC pipe 15mm dia complete all as specified and as directed.
S&F Brass chromium Plated tubular towel rail, 20 mm dia,D type ,60 cm long between flanges complete all as specified and as directed.
M&L for brass CP angle cock heavy duty 15 mm dia capstan head complete all as specified and as directed.
S&F for 20 mm dia gun metal,globe or gate valves with iron wheel head,screwed both ends for iron pipe complete all as specified and as directed.
S&F for 15 mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
M&L for Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed of bore 32 .complete all as specified and directed.
M&L for PCC(1:2:4) type B-2 using 40mm graded stone aggregate in foundation mass concrete and filling complete.
M&L for PCC 1:2:4 type B-1, in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided watertroughs and the like including weathering, slightly roundedor chamfered angles and throating,complete all as specified and as directed.
M&L for 40mm damp proofing course in cement concrete 1:2:4 Type B-0,horizantal or vertical surface including necessary formwork.
M&L for water proofing treatment over RCC slab by applying oil bound bitumen primer @ 0.25 kg/Sqm and providing and laying 3mm thick APP modified water proofing memberane weighing not less than 3.50 kg/sqm, reinforced with non woven polyester reinforcement matt weighing not less than 160 gm/sqm polyester core, having soften point not less than 140 degree c, longitudinal tensile strength not less than 650N/5cm tearing of 180 N, torch application and applying a coat of solar reflective aluminium paint on membrane surfaces @ 0.15 Kg/sqm including ponding test complete all as specified and directed by Engr-in-Charge.
Supplying and laying of CPVC concealed pipes 20 mm outside dia pipes SDR 11 & Plain CPVC SDR 11 fittings in ceiling/walls/floors complete all as specified.
Supplying and laying of CPVC concealed pipes 25 mm outside dia pipes SDR 11 & Plain CPVC SDR 11 fittings in ceiling/walls/floors complete all as specified.
S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."
S&F Chromium plated brass Urinal spreader fixing with 15 mm dia pipe complete all as specified and as directed.
S&F PVC (SWR) multi floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and as directed.
S&F PVC flush pipe 32 mm dia for low level flushing cistern complete all as specified and as directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete in all respect as specified.
Cutting of existing steel tubing for alteration or additions and insertion of Tee 25x25x20mm, union, socket all as specified and directed.
Cutting of existing steel tubing for alteration or additions and insertion of Tee upto 50mm, union, socket all as specified and directed.
S&F 15mm for tubes medium grade galvanized with all fitting fixed to walls, ceiling and laid in floor of including cutting, holes in concrete/brick wall/roof and making good if required height up to four storey bldgs all as specifed and directed by Engineer-in-charge.
S&F 20mm for tubes medium grade galvanized with all fitting fixed to walls, ceiling and laid in floor of including cutting, holes in concrete/brick wall/roof and making good if required height up to four storey bldgs all as specifed and directed by Engineer-in-charge.
S&F GI water tubing 32mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.
S&F GI water tubing 50mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.
S&F Tubes, 'medium grade', galvanised, with all fitting; supplied and laid in trenches complete size 20mm.
M&L for construction of valve pit of size 30cmX30cmX60cm internal dimensions brick construction including all excavation and earth work in har/loose soil returning filling in disposal of surplus spoil to a distance not exceeding 50 m and depositing where directed PCC in foundation of the mix (1:4:8) type D2 (using 40 mm graded crushed aggregate) brick masonry in cement mortor (1:4) rendering 12 mm thick in cement mortor (1:4) internally finished even and fair and pointing flush externally as the work proceeding in the same mortor mild steel 50x6 mm frame MS sheet cover of 3.15 mm thick with handle and locking arrangment painting all the exposed MS work with two coat of synthetic enamel paint of the make as approved all the MS embedded in PCC with two caots of black bituminous paint complete all as specified and shown on drawing.
M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
M&L for Factory made Pressed steel frames for doors, double shutter frame of size 125 mm x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. Incl. Filling the frame with PCC M10 using 12.5 mm graded stone aggregate,treating inner surfaces of frame with a coat of tar complete all as specified and as directed.
S&F 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
M&L for Stainless steel 20 mm dia tubes as in curtain rods including wall brackets,end finials complete all as specified and as directed.
S&F 5.5 mm thick sheet glass plain or tinted ordiner quality, fixed in aluminium doors and windows area of each pane exc 0.5 sqm complete all as specified and as directed.
S&F 35 mm thick Glazed and skeleton shutters,made out of first class soft wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats
M&L for powder Coating aluminium, chowkats/frame made with aluminium section of size 100x44x2mm thick, vertical styles & top rail of shutters with section 84x44x2mm thick and middle & bottom rail of shutters with section 112x44x2mm thick including 5mm thick tinted glass pane at top and 12mm thick both side pre-laminated board at bottom pane inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc; floor hinges, aluminium tower bolt 200mm long-02 Nos., mortice lock 100mm size 4 lever, 100mm dia disc handles etc, fitted to shutters and frames fixed in opening with hold fasts of size 25x3mm flat 150mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm each and match the existing surfaces complete all as specified and directed.
M&L for powder Coating aluminium, window/ventilator with shutters chowkats/ frame made with section 44x44x2mm thick style rails of shutters with section 44x44x2mm thick including 10mm size aluminium butt hinges 02 Nos in each leaf, 5mm thick tinted glass pane as inserted including jointing cleats, glazing clips, rubber packing aluminium anodized beading, screws etc; aluminium tower bolts 100mm size each leaf, hooks and eyes ‘D’ fabricated aluminium handles 100mm size, frame fixed in openings with hold fast of 25x3mm flats, 150mm long 04 Nos in each frames including cutting holes in brick work and embedded in PCC (1:2:4) bed block size 150x150x150mm each and match the existing surfaces complete all as specified and directed.
M&L for solid PVC door frame of size 50 mm x 4 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification complete all as specified and as directed.
M&L for factory made solid panel PVC door shutter 30 mm thick styles consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fittied in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement,supplying and fixing in the frame at site as per specification all as specified and as directed.
S&F Solid PVC frame of size 50 mm x 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube,with necessary arrangement for fixing of glass for louver type window/ventilator and additional PVC beading around the frame for fixing of wire mesh,S&F in opening complete all as specified and directed.
S&F stainless steel soap dish chromium plated complete all as specified and as directed.
S&F 3 mm thick figured glass,pin head type and glazing with oil putty in squares not exc. 0.5 sqm in each pane complete all as specified and as directed.
S&F Vitreous china squatting pan 'orissa pattern', size 580 x 440mm white with intergral foot rest(excluding flusing cistern and flush pipe) complete all as specified and as directed.
S&F brass chromium plated shower rose 125 mm size,with or without swivel joints fixing to steel pipe or union complete all as specified and directed.
Cutting of existing steel tubing for alteration or additions and insertion o Tee 25x25x20mm,union,socket all as specified and directed.
M&L for tubes 'medium grade',galvanised, with all fittings; supplied and laid in trenches complete size 20 mm.
S&F Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed to size 20 mm complete all as specified and as directed.
S&F Rotational moulded polythylene water storage tanks(cylindrical with closed top) hoisted and fixed in position all as specified in SSR Part-I ,capacity 1000 ltr.
S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 210 gms / 25mm-455gms / 40mm- 690 gms) as floating valve for PVC tank.
S&F for steel work as in tabular trusses/supproting pipes including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240
S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment
S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified
S&F for 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275complete all as specified and directed.
M&L for preparing new steel surfaces of any description exc 10cm width or grith and applying two coat of synthetic enamel paint over a coat of red oxide complete.
M&L for Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface for One light point controlled by one, one way switch all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.
All as per Item No.139.00 above but One ceiling /exhaust fan point controlled by one switch and regulator
All as per Item No. 139.00 above but One 3 pin 5 amp socket out point on the same board with other switches.
All as per Item No.139.00 above but One3 pin 5 amps socket out let point on independent board
All as per same in item No 139.00 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.
S&F Switch piano flush type single pole one way 5 amps.
S&F Socket outlet 2 in 1, 3 pin, 6A
S&F Switch socket combination 2 in 1, 6A flush type
S&F in repair Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .
S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body
S&F Electronic regulator 100/120 Watt step type
S&F Lamp holder insulated body with back plate for angle holder including 9W LED Lamp all as per specified.
S&F LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F 15 Watt LED streetlight fitting luminaire made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.
S&F electric water heater, storage type steel body with inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc..
Fabrication, S&F of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 15 w LED security light fitting
S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including 3 core copper cable & cutting holes/ circular opening in brick, stone wall and making good to disturbed surfaces if required etc, complete all as specified and directed by Engr-in-Charge.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F MCB, single pole and neutral, 240 Volts , 6-40 Amps all as specified and as directed.
S&F MCB, single pole and neutral, 240 Volts , 40-63 Amps all as specified and as directed.
S&F MCB singal pole 240 Volts , 6 to 32 Amps all as specified and as directed.
S&F MCB singal pole 240 Volts , 32 to 63 Amps all as specified and as directed.
M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mm dia by means of bolts ,nuts ,check nuts and washers including earthing pit , charcoal, common salt ,earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work of any type of soil/strata all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
Supply laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core.
S&F wall fans 230 volts single phase oscillating 300 mm sweep suitable for wall mounting.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit.
Bidder Name
SVT ENGINEERS AND CONTRACTOR.
M/s. JBSR ENTERPRISES.
Kaushalya Buildcon
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .