Repair of Damaged Pojewal Distribution system off taking at RD 2150 m from riser of Pojewal Lift Irrigation Scheme off-taking at RD 112.526 Km left side of Kandi canal stage-II(Outlet 25 m AND 365 m)

WATER SUPPLY

(2) Excavation by mechanical means (JCB or Hydraulic excavation) in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

((a)) Earth work upto 1.5 m. Depth

(28.2 (a)-ii) For Ordinary soil having gravel upto 40%

(27) Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

(B) Class PN-1.6 as per ISI

(28.27-B (c)) 150 mm / 160 mm i/d Sluice Valves flanged

(28.27 B (d)) 180 mm /200 mm i/d Sluice Valves flanged

(28.27 B (e)) 225 mm / 250 mm i/d Sluice Valves flanged

(10) Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete.

(c) 150 mm /160 mm

(29) Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

((d)) C.I Single air valve screwed (Size 50mm)

(66) Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

Supply of Socketed for 160 mm dia uPVC pipe ISI mark confirming to ISI 4985(Premium make such as Supreme/Finolex/Jain etc) 2.5 kg/cm2 pressure

Supply of Socketed for 180 mm dia uPVC pipe ISI mark confirming to ISI 4985 (Premimum make such as Supreme/Finolex/Jain etc) 2.5 kg/cm2 pressure

Supply of Socketed for 200 mm dia uPVC pipe ISI mark confirming to ISI 4985 (Premimum make such as (Supreme/Finolex/Jain etc) 2.5 kg/cm2 pressure

Supply of Socketed for 225 mm dia UPVC pipe ISI mark confirming to ISI 4985 ( Premimum make such as Supreme/Finolex/Jain etc) 2.5kg/cm2 pressure

Supply and fixing for 160 mm dia. Alpha valve including carriage, rehandling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

Supply and fixing for 180 mm dia. Alpha valve including carriage, rehandling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

Supply and fixing for 200 mm dia. Alpha valve including carriage, rehandling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

Supply and fixing for 225 mm dia. Alpha valve including carriage, rehandling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

BRICK WORK

(11.7) First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING

(15.9) 12.5 mm thick cement plaster 1:4

CONCRETE

(10.13) Cement concrete 1:2:4

(10-10.13-a(1)) mixing by manual means

STEEL AND IRON WORK

(18.18) Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing & fixing for 160 mm dia uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing for 180 mm dia uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing for 200 mm dia. uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing for 225 mm dia. uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Supply and fixing of uPVC equal-Tee of 160 x 160 x 160 mm dia. 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC equal-Tee of 180 x 180 x 180 mm dia. 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC equal-Tee of 200 x 200 x 200 mm dia. 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC equal-Tee of 225 x 225 x 225 mm dia. 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC reducers/increase of 180 x 160 mm 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC reducers/increase of 200 x 160 mm 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC reducers/increase of 225 x 200 mm 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC reducers/increase of 225 x 180 mm 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply fixing of 160 x 6 Kg mm flange tail end point with CI flange inculding carriage, rehandling, loading and unloading, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge.

Supply fixing of 200 x 6 Kg mm flange tail end point with CI flange inculding carriage, rehandling, loading and unloading, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge.

Supply fixing of 250 x 6 Kg mm flange tail end point with CI flange inculding carriage, rehandling, loading and unloading, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge.

Supply and fixing socket for 160 mm dia. including carriage, re-handling, loading & unloading, testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge.

Supply and fixing socket for 180 mm dia. including carriage, re-handling, loading & unloading, testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge.

Supply and fixing socket for 200 mm dia. including carriage, re-handling, loading & unloading, testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge.

Supply and fixing socket for 225 mm dia. including carriage, re-handling, loading & unloading, testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge.

any other item