8354 REPAIR TO CERTAIN B/R WORKS LIKE JOINERY SANITARY FITTINGS WALL TILING ETC AND OTHER MISC WORKS IN OTM ACCN AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm and removing from site.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) area not exc 1.5 Sqm and removing from site

Taking down shutter of any description area exc. 1 Sqm but not. exc. 2 Sqm and removing frome site

Taking down shutter of any description not exc. 1 Sqm and removing frome site.

S & F second class hard wood plain, solid, straight chowkats & frames , wrought, framed, open rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed..

S & F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete as directed.

Supply and fixing factory Made 2nd class hard wood 35mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (With sash bars of any nos) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2004 Part II complete all as specified and directed.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg given on page 176 of SSR 2020 Part II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed..

S & F 4mm thick figured glass, pin headed type and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed..

Taking down Shutters of any description area not exc 1 Sqm each and refixing in the same opening after carrying out necessary Resecuring or easing & adjusting / minor repairs etc all as specified and as directed

Taking down Shutters of any description area not exc 1 Sqm but not exc 2 Sqm each and refixing in the same opening after carrying out necessary Resecuring or easing & adjusting / minor repairs etc all as specified and as directed

S & F 100mm long mild steel but hinges medium weight colld rolld all as specified and as directed .

S & F in repairs 100mm long mild steel but hinges medium weight colld rolld all as specified and as directed.

S & F 150mm long Aluminium powder coated barrel tower bolt of extruded section all as specified and as directed.

S & F in repairs 150mm long Aluminium powder coated barrel tower bolt of extruded section all as specified and as directed.

S & F 100mm long Aluminium powder coated barrel tower bolt of extruded section all as specified and as directed. .

Supply and fix 150mm long Extruded aluminium alloy powder coated handles, fabricated type all as specified and as directed.

Supply and fix in repairs 150mm long Extruded aluminium alloy powder coated handles, fabricated type all as specified and as directed

Supply and fix 100mm long Extruded aluminium alloy powder coated handles, fabricated type all as specified and as directed

S & F 300 mm long Aluminium alloy powder coated sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluninium alloy all as specified and as directed.

S & F in repairs 300mm long Aluminium alloy powder coated sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluninium alloy all as specified and as directed. .

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed. .

Supply & fix in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed. .

Supply and fix in repairs 150mm floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate all as specified and as directed. . .

Supply and fix in repairs 25mm dia decorative type curtain rod , stainless steel, with not less than 1mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for curtain rod complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as directed.

S & F 3mm thick sheet glass ordinary quality & glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as directed. .

S & F figured glass 3mm thick, pin head type & glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as directed.

M & L for preparation of new wooden surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer all as specified and directed.

M & L Prelaminated particle board, exterior grade, prelaminated both side 18 /19 mm thick with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work but prelaminated both sides with decorative choice laminations all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30mm all as specified and directed. .

S & F Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed all as specified and directed.

M & L Second class hard wood Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or beads, cross sectional area not exc 3.00 Sqcm complete all as specified and as directed. . .

S & F aluminium anodised Hasp and staple 75mm long , safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and as directed. .

S & F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F anodised powder coated aluminium door shutters (single / double leaf) aluminium section weighing 0.55 Kg/mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges 3 Nos, anodised aluminium snap beading, screws etc. complete all as specified. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/mtr including necessary joining cleats, glazing clips, neoprene rubber packing, anodised aluminium snap beading, screws etc. complete all as specified . (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F door closer (aluminium extuded body section) hydreulically regulated, ,designation No 1 universal type, suitable for door shutters up to 700mm in width and of wieght not more than 35 Kg complete all as directed.

S & F mild steel 4 Lever mortice lock, vertical type of size 100mm complete all as specified.

S & F in repair mild steel 4 Lever mortice lock, vertical type of size 100mm all as directed.

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as directed.

Taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified

M & L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and Smooth without extra cement omplete all as specified.

M & L Rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:4 , finished the surface even and Smooth without extra cement complete all as specified.

M & L for rendering 5mm thick plaster on ceiling concrete surfaces as in CM 1:3 finished even & Smooth without using extra cement omplete all as specified.

M & L for three coat of white wash to newly plastered surfaces of walls including preparation of surfaces complete all as specified.

M & L for three coat of white wash to newly plastered surfaces of on ceiling complete all as specified.

M & L for two coats of oil bound distemper over a coat alkali resistent primer to newly plastered surfaces of walls including preparation of surfaces omplete all as specified.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Material and labour for Non skid coloured ceramic tiles of size 300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

M & L for coloured glazed ceramic tiles of size 600 x 300x 7 to 8mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

Dismantling of stone slab in any description or thickness, laid , bedded and jointed in any mortar

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

Material and labour Virified Ceramic tiles Double charge (light shade) of size 600mm x 600mm x 10 mm thick (square/ rectangular) polished, as in skirting, set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 10mm thick backing coat in CM (1:4) all as directed and specified.

All as per item No 66 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on concrete or cement plaster surfaces all as specified.

Drilling holes for bolts, pipes, etc. not exc 25mm dia in granite or trape stone for gas connection pipe all as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations all as directed.

Supply and Fix in repairs vitreous china coloured Wash hand basin flat back, size 450 x 450mm white excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete all as directed.

S & F in repairs Vitreous china coloured Wash Hand Basin Counter Top Oval shape of Size 530 mm x 440 mm x 200 mm excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete all as specified.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding etc if required and including making good to floor, complete all as specified

S & F in repairs vitreous china ceramic white Single peice WC (S or P trap) with UF soft close seat cover, hinges, hinges , dual flushing cistern , fixing accessories and accessories set , size 365 x 655 x 765 mm , Product Code: LYS-WHT-38851SSM of Jaquar or equivalent make specified in Appdx 'A' list of Makes complete all as specified and directed.

S & F in repairs plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device all as specified and directed.

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete

Supply and fix in repairs Vitreous China bowl urinal flat back, white of size of 465 x 355 x 265mm (minimum), with fixing accessories , fixing plugs, grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed to walls and connect complete all as directed and specified

S & F in repairs 15mm bore stop cock copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron / pipe or for union and fixed all as specified and directed.

S & F in repairs 15mm bore bib taps cast cipper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S & F in repairs chromium plated Health faucet spray with 1.5 Mtr long flexible cord with hose and hook complete all as specified and directed..

Supply and fix in repairs 15mm bore Bib taps two way type , cast copper alloy with crutch or butterfly handle, chromium plated , fancy type , screwed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed complete all as specified and directed.

S & F in repairs 32mm dia PVC waste pipe for kitchen sink , WHB , Urinal etc all as specified and directed.

Supply and fix in repairs 15mm bore pillar taps of cast copper with capstan head chromium plated , screwed down high pressure with or without lettered 'hot and cold' with long screwed shank and fly nut for iron pipe and fixed all as specified and directed.

Supply and fix in repairs swan neck , 15mm bore pillar taps of cast copper with capstan head chromium plated , fancy type , screwed down high pressure with or without lettered 'hot and cold' with long screwed shank and fly nut for iron pipe and fixed all as specified and directed.

S & F in repair Brass chromium plated wall mixer (2-in-1) for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

S & F in repairs 15 mm dia PVC connections with PTMT nuts , length 450mm all as specified and directed..

S & F in repairs Brass, Chromium plated, Tubular towel rail, 20mm dia, D type, 600mm long between flanges all as specified and directed.

S & F in repairs Soap dish, chromium plated , fixed to plugs with chromium plated brass screws all as specified and directed.

Supply and fix in repairs 125mm size brass Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union all as specified and directed.

S & F in repairs 100mm dia Stainless steel grating dome (minimum weight - 25 gms) fixed to floor traps all as specified and directed.

M & L for GI tubing 15mm bore dia medium grade concealed including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including cutting chases, pinning in brick / concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 including taking up or down old steel water tubing and connections complete all as specified and directed..

S & F GI tubing 20mm bore dia medium grade with all fitting such as bend, elbow, union, tee, short pieces etc and fixed to walls and ceilings or laid in floors including taking up or down old steel water tubing and connections complete all as specified and directed..

Supply and fix 75mm dia PVC (SWR) floor trap / Nahani trap, plain with grating including jointing with solvent cement all as specified and directed…

S & F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S& F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

Supply and fix in repairs 15mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule (Minimum Weight not less than 142 gms) complete all as specified and directed.

Supply and fix in repairs 20mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule (Minimum Weight not less than 210 gms) complete all as specified and directed.

Supply and fix in repairs 25mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule (Minimum Weight not less than 455 gms) complete all as specified and directed.

Supply and fix in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe a(Minimum weight ot less than 90 gms) all as specified and directed.

Supply and fix in repairs 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe (Minimum weight ot less than 110 gms)) all as specified and directed.

Supply and fix in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe (Minimum weight ot less than 90 gms) all as specified and directed.

S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete complete all as specified and directed.

S & F in repairs stainless steel kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm , bowl size 410 mm x 330mm x 160mm complete all as specified and directed..

S & F rotational moulded polythylene water storage tanks of 500 Ltrs capacity tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

S & F rotational moulded polythylene water storage tanks of 1000 Ltrs capacity tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

Disconnecting existing OH tanks exc 250 Litre capacity but not exc 500 Litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting and refixing and reconnecting in position if required after completion of roof repairs complete all as specified and directed. (Note :- Cleaning , repairing etc. will be measured and paid separately)

Disconnecting existing OH tanks exc 500 Litre capacity but not exc 1000 Litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting and refixing and reconnecting in position if required after completion of roof repairs complete all as specified and directed. (Note :- Cleaning , repairing etc. will be measured and paid separately)

Disconnecting existing OH tanks exc 1000 Litre capacity but not exc 2000 Litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting and refixing and reconnecting in position if required after completion of roof repairs complete all as specified and directed. (Note :- Cleaning , repairing etc. will be measured and paid separately)

M & L for Cleaning of RCC water tank of capacity exc 2000 Ltrs and removing all scale and dirt with using bleaching powder etc from tanks and from mouths of circulating pipes etc. complete all as directed.. Note :- Date of cleaning should be written in synthetic enamel paint of 10 cm height using Tensile in format of - "CLEANED ON : DD/MM/YYYY

Cleaning and removing the all vegetation, leafs from open terrace of inaccesible roofs and removing from site outside MOD land all as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets of any thickness, including cover fillets complete all as directed.

S&F powder coated aluminium snap grid frame work of size 600 x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling. Note:- ceiling tiles/ sheets will be measured & paid separately

M & L for 8mm thick seamless calcium silicate ceiling made out of 595 x 595mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and as directed Note : - Frame work for ceiling shall be measured and paid separately

PRASHANT CONSTRUCTION

shiva traders

Galaxy Construction

Mukund Engineers and Contractors

Mourya Enterprises

REKHA ELECTRICALS

ANIL CONSTRUCTION CO.