Name of Work:- Repair of 200 MT Capacity TPDS SFC Godown No. 01 & 02 at Makhdumpur block campus Dist. Jehanabad

Demolishing cement concrete including disposal of material within 50 metre lead:

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 metres lead of:

Roof panels shall be of 26-gauge thick profiled galvalume of galvalume color coated steel sheeting. In case of prepainted galvalume panels, the exterior face is prepainted with 1 mil. Thick factory applied polyester paint. The interior face is prepainted with 0.5 mil. Thick factory applied polyester paint. Each panel shall provide one-meter coverage and can be shipped in any length up to 10m. Color of exterior and interior faces shall be white/gray. The material shall conform to ASIMA/92 and the galvalume coating to ASI M-A/92-A2150. The yied strength of material shall be 345n/mm2 (minimum). (Standrd manufacturer like TATA Bluescope, SAIL, VIZAG, Jindal).

A formed panel matching the material color, slope and profile of adjoining Rib roof panels.

Standard fasteners shall be No. 14, Type A, self-tapping sheet metal screws with metal and neoprene Washers. All screws shall have hexagonal heads, be color coated to match roof and wall sheeting and made of zinc plated steel.

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer

Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows all complete with.

Providing and fixing ball bearing for rolling shutters

Cement plaster in course sand 12 mm cement plaster of mix:

Neat cement punning

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Carriage of Materials

Stonechips-

Coarse Sand-

Cement Local -

Seigniorage Fees