Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.4 Craccepted-aoc | ₹2.4 Cr | accepted-aoc |
Tender Value
₹2.4 Cr
EMD Value
₹3.7 L
Closing Date
20 May 2026, 10:59 pmClosed
Minor Irrigation Department
NAGANAGOUDA Y BHAVI
Repair & Restoration of Hireanoor B.C.B. in Yadgir Taluka & District under Flood Damage for 2025-26
MI/2026-27/IW/WORK_INDENT11789
MI/2026-27/IW/WORK_INDENT11789
Open
Irrigation and Other Works
Two Tender Document System(Two Cover)
Minor Irrigation Division Kalaburagi
11 documents required · 11 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Satisfactorily completed (at least 90% of the contract value), similar nature of work from a single contract such as Construction/Repair & Restoration of B.C.B. of value not less than Rs. 122.19 Lakhs during the last five years (2021-22 to 2025-26). The value of the completed work shall be given a weight of 10% per year to bring them to the price level of FY 2026-27.The work done certificate should be obtained duly Signed from an Officer not below the rank of Executive Engineer of the concerned division
The intending bidder should have executed a minimum Quantity of the following Items as stated below in any one year in during last five years (2021-22 to 2025-26). The work done certificate should be obtained duly signed from an Officer not below the rank of Executive Engineer 1. Earth work : 4786.00 Cum 2. Cement Concrete Quantity: 388.00 Cum 3. Reinforcement Steel: 7.240 Tonne 4. Pitching/Revetment:: 184.00 Sqm
List of Existing Commitments and ongoing works in all departments
Section 3 Qualification Information as per bid document
Liquid assets and /or availability of credit facilities of no less than Rs. 110.04 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.
Achieved in at least two financial years during last 5 years (i.e., 2021-22 to 2025-26) Minimum financial turnover (in all classes of civil engineering construction works only) of Rs.488.76 Lakhs should not be less than Two times the Estimated Annual Payments under this contract. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2026-27.
Tenderers who meet the specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5-B), Where A is Maximum value of civil engineering works executed in any one year during the last five years i.e.2021-22 to 2025-26 (updated to 2026-27 price level) taking into account the completed as well as works in progress. N is Number of years (0.75 years) prescribed for completion of the works for which tenders are invited. B is Value, at 2026-27 price level, of existing commitments and ongoing works to be completed during the next 0.75years (09 Calendar months) Note: The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
A copy of valid KPWD Class II and above registration certificate of individual bidder should be uploaded
₹5,000
₹3.7 L
20 May 2026
6 May 2026
21 May 2026
19 May 2026
14 May 2026
1st month
Removing and hauling all kinds of soil/ soft rock including boulders upto 0.6 m diameter slipped due to natural causes and disposing off the same in specified dump area or as directed by mechanical means including cost of all materials, machinery, labour, rampways and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing rubble and murum filling in layers of 250 to 300 mm including cost of all materials, machinery, labour, watering, ramming and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water all materials, usage & all other appurtenaces required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (Plant Mix Method) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/ grader in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary/ demarcation/ chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, murum filling with all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing centering, shuttering, formwork, scaffolding, etc for slab @ 20% with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for super-structures of bridges including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/ welding joints, tying with binding wire/ soft annealed steel wire and other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and constructing 300 mm thick size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 set in CM 1:5 proportion by volume with pointing joints in CM 1:3 proportion by volume including cost of all materials from approved source, labour, packing stone chips and mortar into joints,finishing,curing and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Grand Total
Line of Credit
CUMMULATIVE
The liquidated damages
For Milestone 1:
For Milestone 2:
For Milestone 3:
MILE STONE
Repair & Restoration of Hireanoor B.C.B. in Yadgir Taluka & District under Flood Damage for 2025-26
1st month
Removing and hauling all kinds of soil/ soft rock including boulders upto 0.6 m diameter slipped due to natural causes and disposing off the same in specified dump area or as directed by mechanical means including cost of all materials, machinery, labour, rampways and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing rubble and murum filling in layers of 250 to 300 mm including cost of all materials, machinery, labour, watering, ramming and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water all materials, usage & all other appurtenaces required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (Plant Mix Method) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/ grader in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary/ demarcation/ chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, murum filling with all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing centering, shuttering, formwork, scaffolding, etc for slab @ 20% with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for super-structures of bridges including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/ welding joints, tying with binding wire/ soft annealed steel wire and other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and constructing 300 mm thick size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 set in CM 1:5 proportion by volume with pointing joints in CM 1:3 proportion by volume including cost of all materials from approved source, labour, packing stone chips and mortar into joints,finishing,curing and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Grand Total
Mile Stone Financial
Mile stone Physical
Mile Stone Financial
Line of Credit
The liquidated damages
For Milestone 1:
For Milestone 2:
For Milestone 3:
SCHEDULE-B
Repair & Restoration of Hireanoor B.C.B. in Yadgir Taluka & District under Flood Damage for 2025-26
Estimate cost: Rs. 290.00 Lakhs
Removing and hauling all kinds of soil/ soft rock including boulders upto 0.6 m diameter slipped due to natural causes and disposing off the same in specified dump area or as directed by mechanical means including cost of all materials, machinery, labour, rampways and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing rubble and murum filling in layers of 250 to 300 mm including cost of all materials, machinery, labour, watering, ramming and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water all materials, usage & all other appurtenaces required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (Plant Mix Method) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/ grader in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary/ demarcation/ chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, murum filling with all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing centering, shuttering, formwork, scaffolding, etc for slab @ 20% with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for super-structures of bridges including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/ welding joints, tying with binding wire/ soft annealed steel wire and other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and constructing 300 mm thick size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 set in CM 1:5 proportion by volume with pointing joints in CM 1:3 proportion by volume including cost of all materials from approved source, labour, packing stone chips and mortar into joints,finishing,curing and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Total
QTY WISE (80%)
SCHEDULE-B
Repair & Restoration of Hireanoor B.C.B. in Yadgir Taluka & District under Flood Damage for 2025-26
Estimate cost: Rs. 290.00 Lakhs
Removing and hauling all kinds of soil/ soft rock including boulders upto 0.6 m diameter slipped due to natural causes and disposing off the same in specified dump area or as directed by mechanical means including cost of all materials, machinery, labour, rampways and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing rubble and murum filling in layers of 250 to 300 mm including cost of all materials, machinery, labour, watering, ramming and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water all materials, usage & all other appurtenaces required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (Plant Mix Method) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/ grader in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary/ demarcation/ chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, murum filling with all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and laying in position cement concrete M25 design mix using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing centering, shuttering, formwork, scaffolding, etc for slab @ 20% with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for super-structures of bridges including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/ welding joints, tying with binding wire/ soft annealed steel wire and other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Providing and constructing 300 mm thick size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 set in CM 1:5 proportion by volume with pointing joints in CM 1:3 proportion by volume including cost of all materials from approved source, labour, packing stone chips and mortar into joints,finishing,curing and all other ancillary operations with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour with all leads and lift, etc. complete as per specification and as directed by the Engineer-in-charge.
Total
QTY WISE (80%)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
HIREA-R-MS-SCH-B UPDATED.xlsx
Others - MOLESTONE AND SCHEDULE B • 1.25 MB
DRAWING2.pdf
Others - DRAWINGS • 0.73 MB
Detailed_Specification.doc
Others - Detailed Specification • 0.75 MB
Bid_Document_HIRE.doc
Tender Document • 20.70 MB
DRAWING1.pdf
Others - DRAWINGS • 2.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .